Filter Sort
close
Filter By
Country of Origin
Gross Weight (lbs.)
Height (in.)
Prop 65 Chemical
Warranty
1 - 8 of 8
Solar Platform TranzVolt Laddervator Pro Kit Milwaukee

Solar Platform TranzVolt Laddervator Pro Kit Milwaukee

40685

The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Solar Tilt Kit is a great tool for lifting materials, such as solar panels, plywood, windows, and doors, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard Milwaukee Brand 18V rechargeable batteries, the Solar Tilt Kit lifts up to 250 lbs. for eight hours. When the Solar Tilt Carriage reaches the top of the track, it pivots to allow workers to safely remove material.
View Details
DANFORTH HI-TENSILE ANCHORS (60H), Holding Power 5,500 lbs.

DANFORTH HI-TENSILE ANCHORS (60H), Holding Power 5,500 lbs.

94023

Danforth Hi-Tensile Anchors are engineered to deliver maximum holding power and quick deep bottom penetration. Crafted with high-grade 4130 steel, each shank is heat treated for exceptional strength while the hot dip galvanized coating ensures long-lasting protection against corrosion. Weighing just 60 lbs., these anchors offer impressive holding power of 5500 lbs., making them reliable and efficient. Suitable for boat lengths ranging from 64 to 73 ft., the Danforth Hi-Tensile Anchors are the preferred choice for boating enthusiasts and professionals who demand superior performance and reliability.
View Details
14 in. Commercial Grade Interal Pile Holder

14 in. Commercial Grade Interal Pile Holder

26434

With an impressive interior width of 14 inches, Tie Down Engineering's Internal Pile Holder is suitable for use with pilings up to 13-1/2 inches in diameter, ensuring a snug and reliable fit. Equipped with four durable 6-inch rubber dock rollers, this innovative design allows for boat dock movement, making it ideal for tidal areas or locations with fluctuating water levels. The overall dimensions of this robust and dependable part are 24 inches x 24 inches x 7-15/16 inches, providing ample space and stability for your boat docking needs. Tie Down Engineering's Internal Pile Holder delivers exceptional performance, easy installation, and versatile functionality, making it an essential component for creating a reliable and adaptable dock system.
View Details
35 ft. Galvanized G-60 Strap

35 ft. Galvanized G-60 Strap

59150

Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
View Details
Heavy Duty TranzPorter Telescopic Support Brace

Heavy Duty TranzPorter Telescopic Support Brace

60005

The TranzPorter Telescopic Support Brace by Tie Down is an accessory part for the TranzPorter ladder hoist. The Support Brace helps hold the track in place and stabilizes the system. This support component bolts directly onto the track and helps ensure a safe application lifting between 250 lbs. and 400 lbs. of material to the roof. The TranzPorter ladder hoist helps workers move shingles to the rooftop while eliminating the risks of doing it by hand or on the back. The hoist and track section assemble easily. The foot pedal and handle brake controls allow for easy and straightforward use while keeping workers safe with the safety mechanisms preventing falls. An optional 4’ or 8’ track extension can be added to the ladder hoist, allowing a maximum height of 44’. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
View Details
YELLOW LADDER WALKTHROUGH GATE ASSEMBLY

YELLOW LADDER WALKTHROUGH GATE ASSEMBLY

72941

View Details
LADDER WALKTHROUGH GATE ASSEMBLY

LADDER WALKTHROUGH GATE ASSEMBLY

72942

View Details
IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS A Model MI2H5/8 with 5/8 in. rod, 48 in. long, 6 in. helix, Class 4A

IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS A Model MI2H5/8 with 5/8 in. rod, 48 in. long, 6 in. helix, Class 4A

59081

Tie Down's Iron Root Double Head Manufactured Home Earth Anchors are expertly designed to deliver exceptional anchoring performance, specifically tailored for uplift and frame tie applications. Featuring a double-headed configuration, these anchors ensure robust attachment for both sidewall and I-beam connections. This innovative design opens doors to a variety of strapping and attachment options, including slotted bolts. The double-headed nature of these anchors facilitates the use of two bolts, enhancing their structural integrity. The plates are positioned in front of the Iron Root anchors, making them ideal for frame attachment in wind zones 2 and 3, providing reliable security against lateral forces. This design offers remarkable versatility across different wind zones, offering the necessary adaptability to varying conditions. With a 6 in. or 7 in. helix, these anchors are engineered to provide optimal grip and stability in the soil. They are specifically engineered for use within soil classes 4A and 4B, ensuring a dependable anchoring solution for various ground conditions. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
1 - 8 of 8
1