Filter Sort
close
Filter By
Brand
Country of Origin
Gross Weight (lbs.)
Height (in.)
Length (in.)
Prop 65 Chemical
Warranty
Width (in.)
1 - 7 of 7
Tongue Galv 3X4X11GAX084.000

Tongue Galv 3X4X11GAX084.000

43230

View Details
8 in. Bolster Swivel Brackets for mounting Bunk Boards

8 in. Bolster Swivel Brackets for mounting Bunk Boards

81210

Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
View Details
Swivel Tie Plate Assembly 3150 lb. Capacity

Swivel Tie Plate Assembly 3150 lb. Capacity

59340A

Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
View Details
Swivel Tie Plate Assembly 2000 lb. Capacity

Swivel Tie Plate Assembly 2000 lb. Capacity

59342A

Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
View Details
30 in. Steel Braced Support Piers, 6000 lb. Capacity

30 in. Steel Braced Support Piers, 6000 lb. Capacity

MPP30

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
View Details
12 in. Black Paint J ROD CONCRETE ANCHOR

12 in. Black Paint J ROD CONCRETE ANCHOR

59120

Tie Down's J Rod Concrete Anchor is a specialized solution for robust concrete anchoring needs. Crafted for installation during the concrete pouring process, this anchor features a unique J hook that conveniently attaches under rebar, ensuring exceptional stability and reliability. Choose between a sleek black paint or galvanized finish to suit your preferences and requirements. Available in versatile options, including 12 in. and 8 in. lengths, with the added choice of a swivel head variant, this anchor caters to a variety of construction demands. Boasting a substantial load capacity of up to 4725 lbs. per anchor, the J Rod Concrete Anchor assures steadfast support for a range of applications. Designed specifically for wet concrete installation, it's an indispensable component for ensuring the longevity and strength of your concrete structures. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
7in. x 23.5in. x 6.5in. Standard Galv Metal Round Fender, 1-pack

7in. x 23.5in. x 6.5in. Standard Galv Metal Round Fender, 1-pack

86265

Tie Down's Galvanized Metal Fenders are the ultimate solution for durable and reliable protection for your trailer wheels. Crafted from 16-gauge galvanized steel, these stamped fenders offer exceptional strength and corrosion resistance, ensuring long-lasting performance even in harsh marine environments. Designed for versatility, our fenders can be easily drilled to fit a variety of mounting options, allowing you to customize the installation to suit your trailer's unique requirements. Please note that mounting brackets are not included, providing you with the flexibility to choose the brackets that best match your trailer setup. Available in various wheel sizes, including 8 inches, 12 inches, 13 inches, and 14-15 inches, our Galvanized Metal Fenders cater to a wide range of trailer configurations.
View Details
1 - 7 of 7
1