Filter Sort
close
Filter By
Compliance
Country of Origin
Gross Weight (lbs.)
1 - 9 of 14
5 in. Rubber Wobble Roller - Ribbed 1.15 in. Shaft

5 in. Rubber Wobble Roller - Ribbed 1.15 in. Shaft

86494

The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. With its ability to assist in loading the boat while preventing scratches and damage, the Tie Down Ribbed Wobble Roller is a must-have accessory for boating enthusiasts.
View Details
TranzVolt SolarTilt Platform

TranzVolt SolarTilt Platform

40676

The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Solar Tilt Kit is a great tool for lifting materials, such as solar panels, plywood, windows, and doors, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard DeWalt Brand 20V batteries or Milwaukee Brand 18V rechargeable batteries, the Solar Tilt Kit lifts up to 250 lbs. for eight hours. When the Solar Tilt Carriage reaches the top of the track, it pivots to allow workers to safely remove material.
View Details
Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail

Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail

70850

The Adjustable Guardrail by Tie Down Safety offer you the best option for closing the gaps on every safety guardrail system. The length adjusts on site to achieve the perfect fit. No tools required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid rail allows the push and pull adjustment of this safety guardrail system. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
View Details
Zinc-Plated Side Mount Tire Carrier

Zinc-Plated Side Mount Tire Carrier

86099

The innovative solution for convenient and secure tire storage on your trailer, Tie Down's Side Mount Tire Carrier features an adjustable bolt circle, accommodating both 4 and 5-lug wheels, providing unparalleled versatility. Crafted from extra heavy-duty welded steel, our side mount tire carrier is built to withstand the toughest conditions, ensuring your spare tire is well-protected and easily accessible whenever you need it. It fits all trailer tongues up to 3 inches wide by 4 inches high, offering a perfect fit for a wide range of trailers. With hassle-free installation, carriage bolts, and lug nuts included, mounting your spare tire has never been easier. Tie Down's Side Mount Tire Carrier boasts US Patent #6,116,483, representing our dedication to innovation and providing you with a unique and top-of-the-line product. Choose from galvanized, zinc-plated, and black powder coat finishes to match your trailer's style and protect your carrier from the elements.
View Details
FENDER SGL JRR 10X34X18 SA .063 NH

FENDER SGL JRR 10X34X18 SA .063 NH

86136

View Details
SPARE TIRE CARRIER WITH ELIMINATOR REMOVABLE SPINDLE/HUB

SPARE TIRE CARRIER WITH ELIMINATOR REMOVABLE SPINDLE/HUB

86068

Crafted from heavy-duty steel, Tie Down's Spare Tire Carrier with Eliminator Removable Spindle/Hub is engineered to accommodate both the spare hub/torsion spindle and the spare tire with ease. Its robust construction ensures a dependable solution for carrying essential trailer components wherever your journey takes you. This innovative carrier includes a pre-greased hub with 5 studs, designed to offer unparalleled reliability and performance. With a hot dip galvanized finish, this carrier is built to withstand the elements and provide lasting protection against rust and corrosion. It's designed exclusively for use with Eliminator Torsion Axles, ensuring a perfect fit and seamless compatibility. Featuring a 1,750 lb. hub with 1-1/16 inch and 1-3/8 inch bearings, you can trust that your spare tire and axle components are in capable hands. Whether you're transporting cargo, embarking on outdoor adventures, or hauling equipment, this carrier guarantees that you're always prepared for any eventuality. Designed to fit all trailer frames up to 5 inches high, our spare tire carrier offers versatility without compromising on stability.
View Details
1/2 in.-13 3-1/16 in. 6-5/16 in. Zinc Plated Square U-Bolt Kits

1/2 in.-13 3-1/16 in. 6-5/16 in. Zinc Plated Square U-Bolt Kits

86330

Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
View Details
12 in. Rubber Keel Roller 5/8 in. Shaft

12 in. Rubber Keel Roller 5/8 in. Shaft

86486

Tie Down's Keel Roller is a versatile and essential component for your boat trailer. Available in spool and center-guided variations, the choice depends on the desired look and functionality of your trailer. Tie Down's Keel Roller serves as a replacement part for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
View Details
5 ft. Yellow Guardrail

5 ft. Yellow Guardrail

70760

Tie Down's 5 ft. Universal Guardrail is designed with the needs of professionals in mind, providing a better alternative to active fall protection systems. With its powder coat painted safety yellow finish, the Universal Guardrail stands out as a highly visible safety measure on any job site. Its vibrant color enhances visibility, ensuring that workers can easily identify and navigate around the guardrail. One of the key features of the Universal Guardrail is its versatility. It is specifically engineered to fit over 95% of competitor bases available in the market. The multi-pin slot feature allows for easy adjustment and compatibility with a variety of bases from different manufacturers. This eliminates the need for specific or proprietary bases, making it a flexible and cost-effective solution. The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Unlike active fall protection systems that require harnesses and lanyards, this guardrail system doesn't restrict movement or interfere with the job at hand. Workers can work with ease and efficiency, maximizing productivity and minimizing disruptions.
View Details
1 - 9 of 14