Filter Sort
close
Filter By
Compliance
Country of Origin
Gross Weight (lbs.)
1 - 9 of 16
5 in. Rubber Wobble Roller - Ribbed 1.15 in. Shaft

5 in. Rubber Wobble Roller - Ribbed 1.15 in. Shaft

86494

The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. With its ability to assist in loading the boat while preventing scratches and damage, the Tie Down Ribbed Wobble Roller is a must-have accessory for boating enthusiasts.
View Details
TranzVolt SolarTilt Platform

TranzVolt SolarTilt Platform

40676

The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Solar Tilt Kit is a great tool for lifting materials, such as solar panels, plywood, windows, and doors, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard DeWalt Brand 20V batteries or Milwaukee Brand 18V rechargeable batteries, the Solar Tilt Kit lifts up to 250 lbs. for eight hours. When the Solar Tilt Carriage reaches the top of the track, it pivots to allow workers to safely remove material.
View Details
FNDR SGL JRR 8X32.6X13.5 AT .063 NH

FNDR SGL JRR 8X32.6X13.5 AT .063 NH

44936

View Details
Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail

Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail

70850

The Adjustable Guardrail by Tie Down Safety offer you the best option for closing the gaps on every safety guardrail system. The length adjusts on site to achieve the perfect fit. No tools required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid rail allows the push and pull adjustment of this safety guardrail system. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
View Details
FENDER SGL JRR 10X34X18 SA .063 NH

FENDER SGL JRR 10X34X18 SA .063 NH

86136

View Details
1/2 in.-13 3-1/16 in. 5-5/16 in. Zinc Plated Square U-Bolt Kits

1/2 in.-13 3-1/16 in. 5-5/16 in. Zinc Plated Square U-Bolt Kits

86329

Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
View Details
1/2 in.-13 3-1/16 in. 6-5/16 in. Zinc Plated Square U-Bolt Kits

1/2 in.-13 3-1/16 in. 6-5/16 in. Zinc Plated Square U-Bolt Kits

86330

Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
View Details
Welded Commercial Grade Male T Connector, One per pack

Welded Commercial Grade Male T Connector, One per pack

26408

The male T connector features a welded 1/2-inch tab that ensures a secure and stable attachment point for fingers and ramps. Measuring 5 inches by 5 inches, this male T connector provides ample support and strength to withstand the demands of various docking applications. It ensures the stability and structural integrity of your dock components, ensuring they can handle heavy loads. Designed to work seamlessly with our female T connector, this male connector enables a solid and seamless connection between dock components. It allows for easy attachment of fingers and ramps, simplifying the installation process. For a secure and dependable joint, use a 3/4-inch bolt set with the male T connector. This ensures the necessary strength and stability for a robust connection that can withstand the elements and heavy use, providing peace of mind.
View Details
8 ft. TranzPorter/TranzVolt Track Section

8 ft. TranzPorter/TranzVolt Track Section

10091

With a height of 8 feet, the TranzPorter/TranzVolt Track Sections by Tie Down offer excellent stacking capabilities, allowing for a total height of up to 44 feet when combined with the 4-foot base. Designed for versatility, the 8-foot track is compatible with the TranzPorter TP250 and TP400 models, as well as Tie Down's other hoisting ladder, the TranzVolt. Weighing only 21 lbs., the 8-foot track sections are lightweight and portable. This makes transportation and setup hassle-free, allowing for easy maneuverability on the job site. The TranzPorter Track Sections are manufactured with high standards and undergo rigorous quality controls. Utilizing top-notch raw materials and component parts made in the USA, these track sections ensure reliable performance and durability.
View Details
1 - 9 of 16