Filter Sort
close
Filter By
Country of Origin
Gross Weight (lbs.)
1 - 9 of 22
4-Step Marine-grade Aluminum Dock Ladder, 300 lb. capacity

4-Step Marine-grade Aluminum Dock Ladder, 300 lb. capacity

29274

Tie Down's Marine-grade Aluminum Dock Ladders set offers a high-quality solution for your waterfront needs. Crafted from marine-grade aluminum, these ladders are lightweight yet exceptionally durable, making them perfect for saltwater docks. The aluminum treadplate steps are expertly welded onto the frame, ensuring secure footing and enhanced traction, even in wet conditions. With three size options available - 3-step, 4-step, and 5-step - you can choose the ladder that best suits your specific requirements. With a robust 300 lb. capacity, these ladders are built to withstand heavy use and provide reliable support for users of varying sizes.
View Details
14 in. Commercial Grade Interal Pile Holder

14 in. Commercial Grade Interal Pile Holder

26434

With an impressive interior width of 14 inches, Tie Down Engineering's Internal Pile Holder is suitable for use with pilings up to 13-1/2 inches in diameter, ensuring a snug and reliable fit. Equipped with four durable 6-inch rubber dock rollers, this innovative design allows for boat dock movement, making it ideal for tidal areas or locations with fluctuating water levels. The overall dimensions of this robust and dependable part are 24 inches x 24 inches x 7-15/16 inches, providing ample space and stability for your boat docking needs. Tie Down Engineering's Internal Pile Holder delivers exceptional performance, easy installation, and versatile functionality, making it an essential component for creating a reliable and adaptable dock system.
View Details
FNDR SGL RR 9X33.5X15 GP 16G

FNDR SGL RR 9X33.5X15 GP 16G

43685

View Details
FNDR TDM RSVK 10X72X20.5 CR 16G NH

FNDR TDM RSVK 10X72X20.5 CR 16G NH

44934

View Details
Heavy Duty TranzPorter Secondary Handle Kit for the TP Series

Heavy Duty TranzPorter Secondary Handle Kit for the TP Series

48468

The TranzPorter Secondary Handle Kit by Tie Down is required when using the Solar Panel Saddle Carriage. The saddle carriage blocks the foot pedal, which engages the hoist, so the Secondary Handle Kit allows the operation of the TranzPorter. This TranzPorter ladder hoist part fits on the side of the hoist to engage the motor and carriage. Highly recommended when lifting plywood, solar panels, and insulation panels, this product works with both the TP250 and TP400 models. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
View Details
8 Bolt Gator Clamp for Zone III and Florida

8 Bolt Gator Clamp for Zone III and Florida

59011

Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
View Details
17 in. x 25 in. ABS/PLASTIC FOUNDATION PADS, 3 sq. ft.

17 in. x 25 in. ABS/PLASTIC FOUNDATION PADS, 3 sq. ft.

59302

Designed to be placed under and support steel piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. The ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
View Details
Heavy Duty Zinc Plated Steel SPARE HUB & TIRE CARRIER

Heavy Duty Zinc Plated Steel SPARE HUB & TIRE CARRIER

86079

Tie Down's Spare Hub and Tire Carrier includes a pre-greased 5-stud hub with bearings, ensuring smooth and reliable operation on the road. The heavy-duty zinc-plated steel carrier is designed to securely mount both the spare hub and tire, providing a robust and dependable storage solution. Specifically designed for use with a 1,750 lb. hub and compatible with 1-1/16 in. and 1-3/8 in. bearings, this carrier offers versatility and compatibility with a range of trailer setups. It fits all trailer frames up to 3 in. wide and 4 in. high, allowing for easy installation and a secure fit. For added security, the carrier features security holes that enable the use of an optional cable and lock, providing peace of mind during transportation.
View Details
1/2 in. x 4-1/4 in. Roller Shaft

1/2 in. x 4-1/4 in. Roller Shaft

86024

Tie Down Engineering's boat trailer Roller Shaft, a versatile and reliable component for various applications, is made with high-quality zinc-plated steel and offers exceptional durability and corrosion resistance. The packaged kit includes the roller shaft itself along with two cap nuts, providing you with everything you need for easy installation. Roller shafts are available in two diameters: ½ inch and ? inch, allowing you to choose the size that best fits your specific requirements.
View Details
1 - 9 of 22