Filter Sort
close
Filter By
Brand
Country of Origin
Gross Weight (lbs.)
Height (in.)
Length (in.)
Prop 65 Chemical
Warranty
Width (in.)
1 - 9 of 9
FNDR TDM JRRK 10X74X19 DP 14G NH

FNDR TDM JRRK 10X74X19 DP 14G NH

44170K

View Details
1.44 in. x 1.75 in. Spring Hanger

1.44 in. x 1.75 in. Spring Hanger

17013

This 1.5 in. x 1.75 in. spring hanger is a metal bracket that attaches to the trailer frame. It is designed to hold one end of a leaf spring and allow it to pivot or move as needed when the trailer encounters bumps or uneven road surfaces. This pivotal movement helps absorb shocks and vibrations, ensuring a more comfortable and safer towing experience for both the trailer and the boat. Properly installed and maintained spring hangers are essential for the overall performance and safety of a boat trailer as they contribute to the trailer's stability, weight distribution, and the reduction of road-induced stress on the boat and its hull.
View Details
FNDR SGL RR 9X28.5X13 CR 16G NH

FNDR SGL RR 9X28.5X13 CR 16G NH

44915

View Details
12 x 10 x 12-3/8 in. 11 Gauge Steel PANEL BRACKETS

12 x 10 x 12-3/8 in. 11 Gauge Steel PANEL BRACKETS

86153

Crafted with durable 11 gauge steel, Tie Down's Panel Brackets are specifically designed for use with keel rollers, ensuring reliable support and protection for your boat during loading and unloading. Featuring slots that accept 7/16 in. or 1/2 in. diameter bolts, our Panel Brackets provide vertical roller adjustment, allowing you to customize the setup to match your boat's specific requirements. Accommodating both 1/2 in. and 5/8 in. sizes and hot dip galvanized for lasting protection, our Panel Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. With a roller size of 12 inches, the width between slots is 10 inches, and the bracket width is 12-? inches, providing a secure and snug fit for your keel rollers.
View Details
8 in. Commercial Roof Anchor

8 in. Commercial Roof Anchor

70861-L16

Tie Down's Commercial Roof Anchor is a reliable, easy-to-install, and versatile solution for ensuring the safety of workers in environments where fall protection is essential. Its robust construction and regulatory compliance make it a valuable addition to your safety equipment arsenal. Crafted from durable steel and featuring a galvanized finish, this roof anchor is engineered to provide a secure and dependable attachment point for various fall protection systems. This anchor is a versatile addition to your safety equipment. It can be employed as a crucial component of a fall arrest system or for tasks like window washing, ensuring safety for workers in high-risk environments. The Commercial Roof Anchor is designed to work seamlessly with a range of fall protection equipment, including retractable lifelines, vertical lifelines, rope grab units, and horizontal lifeline systems. Its versatility makes it suitable for various applications. This anchor meets compliance with OSHA 1910 and OSHA 1926 Subpart M regulations, giving you peace of mind regarding safety and regulatory adherence. The roof anchor extends through the roof, making it accessible during and after construction. Its design ensures that it fits a wide range of fall protection applications. The riser height can be adjusted from 8 in. to 36 in., providing flexibility to meet your specific needs.
View Details
12 ft. Frame Tie with Buckle, 30 pack

12 ft. Frame Tie with Buckle, 30 pack

59144

Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
View Details
2 in. x 8 in. x 16 in. ABS PIER PLATES/CAP BOARDS

2 in. x 8 in. x 16 in. ABS PIER PLATES/CAP BOARDS

59662

Meant for bridging the vertical gap between the top of a pier and the bottom of the main beam, Tie Down's ABS Pier Cap Plates can be utilized individually or in a double-stacked configuration. With a remarkable load capacity of 8,000 lbs. for single use and an impressive 16,000 lbs. for double application, t1 in. plates are designed to complement 2 in. counterparts.
View Details
Painted Black X-PLATE ANCHOR

Painted Black X-PLATE ANCHOR

59118

The X-Plate Anchor is the ultimate solution for stabilizing structures in challenging Class 2 soils. With an impressive 2,200 lb. working load capacity at a maximum 50-degree angle, this anchor delivers exceptional stability and reliability. Designed for horizontal anchorage, the X-Plate Anchor is perfect for securing various structures, ensuring they remain firmly in place. The anchor's durable black paint finish not only enhances its appearance but also provides excellent protection against environmental elements, ensuring long-lasting performance. Please note that the X-Plate Anchor is not intended for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
24 in. Weld-On Commercial Roof Anchor

24 in. Weld-On Commercial Roof Anchor

70873-LF

Tie Down Safety’s Commercial Roof Anchors (CRA) stand by the Made in the USA standards of Tie Down. We manufacture anchors compatible with wood, metal, and concrete substrates with a wide variety of options. The anchorage post functions by extending through the roof, accessible during and after construction. Attach our pass-through horizontal lifeline parts for a continual hands-free fall arrest system used for perimeter work. In most cases, our commercial roof anchors can be used in window washing tieback applications. The Tie Down Commercial Roof Anchor series includes durable, galvanized steel conforming to ASTM standards. These roof anchors fit nearly all fall protection applications, and the riser height ranges from 8” to 36.” Tie Down Safety keeps exacting standards and quality control through quality raw materials and components made in the USA.
View Details
1 - 9 of 9
1