Filter Sort
close
Filter By
# of users
# users on fall arrest
# users on fall restraint
Anchor Type
Country of Origin
Gross Weight (lbs.)
1 - 9 of 13
8 in. Black Rubber 11 Gauge Galv Steel PANEL BRACKET ASSEMBLIES

8 in. Black Rubber 11 Gauge Galv Steel PANEL BRACKET ASSEMBLIES

86431

Tie Down's Panel Bracket Assemblies is the all-in-one solution for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Choose from a variety of roller materials, including amber or black polyvinyl and black rubber, ensuring a perfect fit for your boat's needs. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With rollers measuring 8 inches in size, these assemblies feature a 6-inch width between slots and an 8-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
View Details
6 inch Landscape Edging Kit (4 Plate Kit)

6 inch Landscape Edging Kit (4 Plate Kit)

33220

Tie Down is here to help you own the edge on your landscaping. Upgrade your lawn game with our edging strips that deliver unmatched aesthetic and curb appeal while also providing a barrier against weeds, unwanted grass, and bugs from your flower beds and overall landscape design. Our edging strips come easy to assemble with sharp teeth that cut through dirt for a fast and easy installation. Whether you have a traditional or modern landscape, Tie Down's Landscape Edging solutions complement any aesthetic and provide lasting results. This kit features (4) 6" x 48" Edging Plates and (4) Connector pieces.
View Details
16 in. x 18 in. ABS/PLASTIC FOUNDATION PADS, 2 sq. ft. for block piers and steel piers

16 in. x 18 in. ABS/PLASTIC FOUNDATION PADS, 2 sq. ft. for block piers and steel piers

59300

Designed to be placed under and support piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. Intended for use with either block or steel piers, the ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
View Details
16 in. Adjustable Roller Side Guide, Pair

16 in. Adjustable Roller Side Guide, Pair

86106

The ultimate solution for precision boat loading and secure trailer fit, Tie Down's Adjustable Roller Side Guide Ons offer up to 16 inches of adjustment (8 inches on each side), allowing you to customize the fit to match the specific angle of your boat's hull. Designed with durability in mind, our Adjustable Roller Side Guide Ons include hot dip galvanized steel components, ensuring superior corrosion resistance and long-lasting protection against the elements. The one-piece adjustable clamp and u-bolt provide a secure and reliable attachment to your trailer, ensuring that your boat is supported and guided with confidence during loading and unloading. Fitting all channel and tube frames up to 5 inches, our Adjustable Roller Side Guide Ons offer universal compatibility, making them a versatile choice for various boat trailers.
View Details
4 in. Black Hull Sav'r PVC Ribbed Wobble Roller w/ 1-1/8 in Shaft

4 in. Black Hull Sav'r PVC Ribbed Wobble Roller w/ 1-1/8 in Shaft

86427

The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. With its ability to assist in loading the boat while preventing scratches and damage, the Tie Down Ribbed Wobble Roller is a must-have accessory for boating enthusiasts.
View Details
5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack

5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack

86275

Crafted with sturdy solid steel, Tie Down's Spring Hangers offer the strength and durability required to withstand the demands of towing. Our rear hangers are designed for use on slipper springs measuring 1-3/4 inches to 2 inches wide, with a capacity of 5,200 lbs. to 8,000 lbs., making them suitable for medium-duty axles. These hangers are constructed from 1/4-inch stock steel, ensuring robust performance and reliability. Ideal for slipper and double-eye springs mounted on medium-duty axles with a capacity of 1,000 lbs. to 3,500 lbs., our front spring hangers offer dependable support for your trailer's suspension system. Pre-drilled for 9/16-inch bolts, these hangers ensure easy installation and a secure fit. Our spring hangers come in raw unfinished steel, providing a versatile option for customization or finishing to match your trailer's aesthetics. Each pack contains one spring hanger, providing a convenient and cost-effective solution for your trailer's suspension needs.
View Details
4 in. Amber PVC Ribbed Wobble Roller with 1-1/8 in. Shaft

4 in. Amber PVC Ribbed Wobble Roller with 1-1/8 in. Shaft

86277

The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. With its ability to assist in loading the boat while preventing scratches and damage, the Tie Down Ribbed Wobble Roller is a must-have accessory for boating enthusiasts.
View Details
Danforth S600 Anchor Kit

Danforth S600 Anchor Kit

95096

Tie Down's Danforth Standard Anchor Kit featuring the S600 model is the ultimate solution for secure anchoring on your boat. Crafted with high-strength steel and hot-dip galvanized for exceptional durability, this kit ensures long-lasting protection against the harsh marine environment. The kit includes everything you need for reliable anchoring: one S600 Danforth® Anchor, a coil of 3/8 in. x 150 ft. nylon anchor line with a thimble, a 1/4 in. x 4 ft. stainless steel chain, and two shackles. With this comprehensive package, you can confidently set up a robust anchoring system for your boat. The S600 Danforth Anchor boasts a holding power of 600 lbs. This anchor is designed to fit boats with a length between 17-27 ft., making it suitable for a wide range of vessels. Despite its impressive capabilities, the anchor remains lightweight, weighing in at just 9 lbs., ensuring ease of handling and storage.
View Details
Galvanized 16 Plate Hippo Anchor Deadweight System

Galvanized 16 Plate Hippo Anchor Deadweight System

65220G

The ultimate solution for rooftop fall protection without the need for roof penetration, Tie Down's Hippo Anchor Deadweight System offers exceptional fall arrest and fall restraint capabilities, ensuring the safety of workers at heights. Crafted with precision, it's designed to prevent leaks and protect your roof from damage, making it an ideal choice for both temporary and permanent applications. Choose between the 12-plate configuration, which requires a 10-foot distance from the leading edge, or the 16-plate configuration with an 8-foot leading edge requirement, depending on your specific needs. This system meets stringent compliance standards, including OSHA 1926.502, ASSE Z359.1, CSA 259, and Military Code EM 385-1, ensuring peace of mind regarding safety and regulatory adherence. The central anchor is strategically raised to minimize fall travel distance, further enhancing safety. This system is compatible with lanyards with a maximum arresting force of 900 lbs. and can be used with roofs with up to a 5° pitch.
View Details
1 - 9 of 13