close
Filter By
Brand
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 3
- 14.00 1
- 14.43 1
- 140.00 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 2.19 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
902.00, 1142.00, 28.00, 6.00, 42.53, 56.00, 58.00, 42.00 - Safety
10 items
Tie Down Engineering Hatch Mate | Universal Roof Access Hatch System | Roofing Hatch Safety Tools edit
73057
Tie Down’s Hatch Mate is the first roof hatch system to ensure universal mounting on either side of interior fixed ladders by requiring only six fasteners for attachment. Shipped fully assembled, its innovative design uses a chain mounted to an actuation pulley. This chain can be shortened or lengthened for roof heights up to 28 ft. Engineered for ease of use, this pulley system requires only several pulls on the chain to unlock and open the upper roof hatch and several pulls on the opposite side of the chain to close the hatch. To ensure permanent closure, the operator only needs to place the chain into the lock mounting bracket and lock with a standard lock and key.
- USD
40 Inch Wide Super Steps - 3 Modules and Pallet
72920
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
7.5 ft. Galvanized Guardrail
70765
Tie Down's 7.5 ft. Universal Guardrail is designed with the needs of professionals in mind, providing a better alternative to active fall protection systems. With its galvanized finish, the Universal Guardrail stands out as a highly visible safety measure on any job site. One of the key features of the Universal Guardrail is its versatility. It is specifically engineered to fit over 95% of competitor bases available in the market. The multi-pin slot feature allows for easy adjustment and compatibility with a variety of bases from different manufacturers. This eliminates the need for specific or proprietary bases, making it a flexible and cost-effective solution. The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Unlike active fall protection systems that require harnesses and lanyards, this guardrail system doesn't restrict movement or interfere with the job at hand. Workers can work with ease and efficiency, maximizing productivity and minimizing disruptions.
- USD
Adjustable 5 ft. - 7 ft. Yellow Wheeled Guardrail Gate & Latch Kit
70908
Tie Down's Wheeled Guardrail Gate and Latch Kit is the lightweight and portable solution to enhance rooftop safety. Weighing only 42 lbs., it offers an affordable and highly versatile option for your job site. This kit easily bolts and mounts onto round or square guardrail tubes, providing quick installation with all necessary components included. With an adjustable height range from 70 in. to 85 in., it effectively protects access points like roof hatches, skylights, fire vents, or floor doors. The self-closing gate is constructed with durable steel, ensuring compliance with OSHA 1926.501(b)(1) and ANSI/ASSP A1264.1-2017 standards for rooftop safety. Choose from Yellow or galvanized options to suit your specific needs.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Stack Pallet Kit - 11 Yellow 10 ft. Guardrails & 12 Socket Bases
70762
The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Engineered to hold 11 Universal Guardrails and 12 Socket Bases on a reinforced metal rack, the Stack Rack Kit includes up to 110 linear feet of guardrail protection, depending on the kit purchased. With its ability to stack perfectly for either side loading of a flatbed or end loading for a closed trailer, the Stack Rack’s metal frame allows three bundles of guardrails to be stacked for utmost convenience, allowing you to ship more linear feet per truckload than any other guardrail system.
- USD
Steep Slope Guardrail
65014
Complying with OSHA 1926.502(b)(1) standards, Tie Down's Steep Slope Guardrail is engineered for top-tier safety on steep roofs. Crafted with meticulous attention to quality, this guardrail system combines high-grade materials made in the USA, ensuring exceptional corrosion resistance and long-lasting durability. Adaptability is at the core of this guardrail's design, offering five adjustable pitch positions ranging from 4/12 to 16/12. This versatility enables you to confidently work on a variety of roof slopes while maintaining precise positioning and utmost safety. Each Steep Slope Guardrail includes an extra wing nut and bolt, adding convenience and flexibility during installation and adjustment. With a maximum spacing of 8 ft., it ensures ample coverage and security. This robust system can handle the demands of the job, supporting both worker safety and efficient construction processes. The adjustable rail brackets simplify attachment to standard 2 x 4's, ensuring a snug fit and streamlining installation. This system comes with two per master carton.
- USD
Adjustable 5 ft. - 7 ft. Galv Wheeled Guardrail Gate & Latch Kit
70908G
Tie Down's Wheeled Guardrail Gate and Latch Kit is the lightweight and portable solution to enhance rooftop safety. Weighing only 42 lbs., it offers an affordable and highly versatile option for your job site. This kit easily bolts and mounts onto round or square guardrail tubes, providing quick installation with all necessary components included. With an adjustable length range from 70 in. to 85 in., it effectively protects access points like roof hatches, skylights, fire vents, or floor doors. The self-closing gate is constructed with durable steel, ensuring compliance with OSHA 1926.501(b)(1) and ANSI/ASSP A1264.1-2017 standards for rooftop safety. Choose from Yellow or galvanized options to suit your specific needs.
- USD