close
Filter By
# users on fall arrest
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 3
- 14.00 1
- 14.43 1
- 140.00 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 2.19 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Prop 65 Chemical
Prop 65 Warning Copy
Warranty
58.00, 902.00, 38.00, 14.43, 24.77, 703.00, 300.00 - Safety
9 items
5.5 ft. - 9.75 ft. Platform Crossover Toeboard
73067
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
40 Inch Wide Super Steps - 3 Modules and Pallet
72920
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Adjustable 35 in. to 48 in. Universal Guardrail Gate
72943
Tie Down's Adjustable Guardrail Gate Kit is your reliable solution for rooftop safety, offering versatility, compliance, and enhanced peace of mind on the job. Engineered to deliver robust fall protection, this kit is ideal for workers operating near roof edges, providing a crucial safety barrier. Designed for ultimate safety, this gate kit boasts a self-closing mechanism, ensuring it remains securely closed when not in use. This guardrail gate is built to fit universal guardrails ranging from 1-½ to 2 inches in round and square shapes. The adjustable gate width provides flexibility to suit your specific needs. The small gate adjusts from 24 inches to 36 inches, while the large gate adjusts from 35 inches to 48 inches. Meeting stringent safety standards, it complies with both OSHA 1926.502 and CSA Z259.18.19 regulations, ensuring workplace safety. Intended for application on flat, level roofs with a maximum pitch of ½ inch per foot, this kit is versatile and adaptable to various roofing scenarios.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Adjustable 8 ft. - 10 ft. Roof Guardrail
70852
The Adjustable Guardrail by Tie Down Safety offers you the best option for closing the gaps in every safety guardrail system. The length adjusts on-site to achieve the perfect fit. No tools are required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid-rail allows this safety guardrail system’s push and pull adjustment. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Safe-T-Zone Permanent Warning Line System
65084
From warehouses to industrial sites and construction zones, Tie Down's Safe-T-Zone Permanent Warning Line System provides enhanced safety without the need for fall arrest or horizontal lifeline functionality. The system's stackable heavy-dipped galvanized base plates weigh 50 lbs. each, delivering stability and resilience. Featuring convenient handles on the bases, this portable system guarantees swift setup and breakdown across different work areas. This system includes customizable warning flags spaced at 6-foot intervals on a safety yellow vinyl-coated 5/32 cable available in a variety of colors featuring laser-cut "Danger," meeting OSHA regulations. Practical and straightforward, this permanent warning line system is ideal for areas with irregular or infrequent work activity. It effectively safeguards controlled access, prevents unauthorized entry, and clearly alerts workers to potential hazards.
- USD
30 ft. WebRail Kit - Portable Fall Arrest & Tensioned Guardrail System
72893
The WebRail Kit offers a groundbreaking solution for fall protection. This nonpenetrating solution combines the benefits of fall arrest and passive protection, keeping up to 4 workers safe simultaneously. With a span of 31 feet between building columns, convenient packaging, 186 feet of linear protection, and comprehensive components, the WebRail Kit is the ultimate choice for portable fall arrest and tensioned guardrail systems.
- USD
Safe-T-Zone Permanent Warning Line System
65074
The Safe-T-Zone Permanent Warning Line System provides a cost-effective, durable, and permanent warning line system when other passive fall protection is not required. The aluminum warning pendants read, “6 FT. SAFE DISTANCE." This OSHA-compliant warning line system provides a permanent but simple solution for unprotected edges for irregular work in a facility or rooftop. This product works best on low-sloped roofs 15 ft. away from an unprotected edge. While not intended to be used as a fall arrest system or horizontal lifeline, the permanently attached metal flags provide additional protection and warning signals. This kit includes six bases and vertical line tubes, 100 ft. of cable, and laser-cut warning flags. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
1 - 9 of 9
1