close
Filter By
Brand
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 902.00, 100.00, 275.00, 494.00, 55.70, 14.43, 4.00 - Safety
11 items
5.5 ft. - 9.75 ft. Platform Crossover Toeboard
73067
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
40 Inch Wide Super Steps - 3 Modules and Pallet
72920
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Zip Rail Stack Container
70737
Keep your job site organized with the Tie Down Zip Rail Container. This storage solution is designed to neatly store all components of the Compression Kit (70736) and Gravel Stop Kit (70755). Whether you're transporting or storing, this container ensures efficiency and ease.
- USD
Metal Frame Roof Guardrail Stack Pallet Only
70769
Tie Down's Yellow Guardrail Stack Pallet Kit offers a convenient and organized solution for storing and transporting guardrails and universal bases. The kit includes a sturdy pallet with a metal frame that can securely hold up to 11 guardrails and 12 universal bases. The guardrails are designed to stack, allowing for easy side loading or end loading onto the pallet. The Stack Rack, with its durable metal frame, enables the stacking of multiple pallets up to three racks high, optimizing storage space. Available in both yellow coating and galvanized, this kit provides a practical and efficient way to manage and transport guardrails and bases, ensuring easy accessibility and minimizing clutter on job sites.
- USD
15 ft. Ladder Guardrail Corral
72884
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends either 7.5 or 15 ft. onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD