close
Filter By
Brand
# of users
# users on fall arrest
# users on fall restraint
Color
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 3
- 14.00 1
- 14.43 1
- 140.00 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 2.19 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 2
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 902.00, 0.67, 14.43, 750.00, 55.70, 6.00 - Safety
9 items
5.5 ft. - 9.75 ft. Platform Crossover Toeboard
73067
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
40 Inch Wide Super Steps - 3 Modules and Pallet
72920
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Steep Slope Guardrail
65014
Complying with OSHA 1926.502(b)(1) standards, Tie Down's Steep Slope Guardrail is engineered for top-tier safety on steep roofs. Crafted with meticulous attention to quality, this guardrail system combines high-grade materials made in the USA, ensuring exceptional corrosion resistance and long-lasting durability. Adaptability is at the core of this guardrail's design, offering five adjustable pitch positions ranging from 4/12 to 16/12. This versatility enables you to confidently work on a variety of roof slopes while maintaining precise positioning and utmost safety. Each Steep Slope Guardrail includes an extra wing nut and bolt, adding convenience and flexibility during installation and adjustment. With a maximum spacing of 8 ft., it ensures ample coverage and security. This robust system can handle the demands of the job, supporting both worker safety and efficient construction processes. The adjustable rail brackets simplify attachment to standard 2 x 4's, ensuring a snug fit and streamlining installation. This system comes with two per master carton.
- USD
Fitting Al Open End
13705A
Tie Down's Zip Rail Fittings offer versatile solutions for safety rail systems. These fittings are available in steel piping with various color options including yellow, black, blue, and galvanized. They are designed for easy installation without the need for special tools and are constructed from durable cast iron or aluminum materials. Compatible with safety yellow, galvanized, or custom color safety rails, these fittings meet OSHA compliance standards. They provide flexibility for designing both interior and exterior safety rail systems, allowing users to customize layouts to suit specific applications and requirements.
- USD
BigFoot Non-Penetrating Mobile Fall Protection System Supports 3 Workers
60060US
The newest addition to Tie Down's mobile fall protection line, Big Foot offers even easier portability while allowing work on concrete, TPO, and EPDM. This lightweight series provides fall arrest for one person and an additional two in restraint. With a gross weight of 750 lbs., nearly half the weight of the Squatch, Bigfoot includes a jacking feature for easy mobility and handling, printed instructions, and hoist rings for lifting. Available in both a USA model and a Canadian model, this non-penetrating mobile fall protection system complies with OSHA 1926.502 and ANDI/ASSE Z359.6-2009(D).
- USD
1 - 9 of 9
1