close
Categories
Filter By
Brand
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 56.00, 1142.00, 300.00, 55.70, 0.22, 17.00 - Safety
10 items
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Stack Pallet Kit - 11 Yellow 10 ft. Guardrails & 12 Socket Bases
70762
The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Engineered to hold 11 Universal Guardrails and 12 Socket Bases on a reinforced metal rack, the Stack Rack Kit includes up to 110 linear feet of guardrail protection, depending on the kit purchased. With its ability to stack perfectly for either side loading of a flatbed or end loading for a closed trailer, the Stack Rack’s metal frame allows three bundles of guardrails to be stacked for utmost convenience, allowing you to ship more linear feet per truckload than any other guardrail system.
- USD
Tie Down Engineering Zip Rail Pipe Fittings Single Socket Tee
13750
Tie Down's Zip Rail Fittings offer versatile solutions for safety rail systems. These fittings are available in steel piping with various color options including yellow, black, blue, and galvanized. They are designed for easy installation without the need for special tools and are constructed from durable cast iron or aluminum materials. Compatible with safety yellow, galvanized, or custom color safety rails, these fittings meet OSHA compliance standards. They provide flexibility for designing both interior and exterior safety rail systems, allowing users to customize layouts to suit specific applications and requirements.
- USD
42 in. x 7.5 in. x 3 in. FitRight Guardrail
72908
Tie Down's FitRight Guardrail Post is the optimal solution for ensuring safety in multi-family, senior living, and student housing projects. Crafted from powder-coated and galvanized steel, this post offers durability and longevity while providing essential protection for balconies, slab edges, and stairways. With its adjustable height settings and convenient wingnut adjustments, installation and customization are effortless, allowing for precise fitting to various post bases and pedestals. Its innovative design facilitates safe completion of slab work without the hassle of rail removal, making it a versatile and practical choice for construction projects.
- USD
Safe-T-Zone Permanent Warning Line System
65084
From warehouses to industrial sites and construction zones, Tie Down's Safe-T-Zone Permanent Warning Line System provides enhanced safety without the need for fall arrest or horizontal lifeline functionality. The system's stackable heavy-dipped galvanized base plates weigh 50 lbs. each, delivering stability and resilience. Featuring convenient handles on the bases, this portable system guarantees swift setup and breakdown across different work areas. This system includes customizable warning flags spaced at 6-foot intervals on a safety yellow vinyl-coated 5/32 cable available in a variety of colors featuring laser-cut "Danger," meeting OSHA regulations. Practical and straightforward, this permanent warning line system is ideal for areas with irregular or infrequent work activity. It effectively safeguards controlled access, prevents unauthorized entry, and clearly alerts workers to potential hazards.
- USD
24 in. Bolt-On Commercial Roof Anchor with 16 in. x 16 in. Base
70873-L16
Tie Down's 24 in. Screw On 16x16 Base Anchor is your go-to choice for a range of safety applications. Crafted with care in the USA, this anchor features a sturdy 1/2 in. base thickness and a 16 in. x 16 in. size to ensure stability. Its bolt-on attachment type simplifies installation. These anchors are compatible with wood, metal, and concrete substrates, offering a wide array of options to cater to your specific needs. Designed to extend through the roof, this anchorage post remains accessible during and after construction. With a riser height ranging from 8 in. to 36 in., it accommodates diverse fall protection applications. Crafted from durable galvanized steel that conforms to ASTM standards, you can trust in its reliability and longevity. Whether it's for window washing tieback applications or creating a hands-free fall arrest system for perimeter work, this anchor is adaptable and up to the task.
- USD