close
Categories
Filter By
Brand
Anchor Type
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 3
- 14.00 1
- 14.43 1
- 140.00 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 2.19 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 35.00, 4.00, 24.62, 999.00, 1190.00, 37.00, 55.70 - Safety
14 items
24" Bolt On 11x11 base anchor
70873-L11
- USD
WebRail Balcony Post
73075
The WebRail Balcony Post by Tie Down is a versatile and secure solution designed specifically for balcony applications. This post can be firmly fastened to a concrete slab or decking, allowing the seamless passage of webbing for effective fall protection. Serving as either a corner post or an end post for WebRail webbing, this product offers flexibility in its application. With three optional installation methods—concrete anchor set, single brace anchor set, or terminating/end post set—users can choose the configuration that best suits their balcony setup. It's important to note that the required mounting hardware, although not included, is specific to each installation method, ensuring the precise and secure attachment of the WebRail Balcony Post for reliable fall protection in any balcony setting.
- USD
18 in. Screw-On Commercial Roof Anchor with 16 in. x 16 in. Base
70870-L16
Tie Down's 18 in. Screw On 16x16 Base Anchor is your go-to choice for a range of safety applications. Crafted with care in the USA, this anchor features a sturdy ? in. base thickness and a 16 in. x 16 in. size to ensure stability. Its screw-on attachment type simplifies installation. These anchors are compatible with wood, metal, and concrete substrates, offering a wide array of options to cater to your specific needs. Designed to extend through the roof, this anchorage post remains accessible during and after construction. With a riser height ranging from 8 in. to 36 in., it accommodates diverse fall protection applications. Crafted from durable galvanized steel that conforms to ASTM standards, you can trust in its reliability and longevity. Whether it's for window washing tieback applications or creating a hands-free fall arrest system for perimeter work, this anchor is adaptable and up to the task.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
10 ft. Galvanized Guardrail
70764
Tie Down's 10 ft. Universal Guardrail is designed with the needs of professionals in mind, providing a better alternative to active fall protection systems. With its galvanized finish, the Universal Guardrail stands out as a highly visible safety measure on any job site. One of the key features of the Universal Guardrail is its versatility. It is specifically engineered to fit over 95% of competitor bases available in the market. The multi-pin slot feature allows for easy adjustment and compatibility with a variety of bases from different manufacturers. This eliminates the need for specific or proprietary bases, making it a flexible and cost-effective solution. The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Unlike active fall protection systems that require harnesses and lanyards, this guardrail system doesn't restrict movement or interfere with the job at hand. Workers can work with ease and efficiency, maximizing productivity and minimizing disruptions.
- USD
Stack Pallet Kit - 11 Yellow 5 ft. Guardrails & 12 Socket Bases
70792
The Tie Down Guardrail Stack Pallet Kit provides a convenient and efficient solution for storing and transporting guardrails and socket bases. The kit includes a sturdy pallet with a metal frame that is designed to securely hold up to 11 guardrails and 12 socket bases. The guardrails are designed to stack, allowing for easy loading from either the side or the end of the pallet. The Stack Rack, featuring a durable metal frame, enables multiple pallets to be stacked up to three racks high, optimizing storage space. With this kit, organizing and moving guardrails and bases is a breeze, ensuring easy accessibility and reducing clutter on job sites.
- USD