close
Filter By
# of users
# users on fall arrest
# users on fall restraint
Compatible with
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 3
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 1
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 2
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 35.00, 140.00, 430.00, 24.77, 29.00, 39.68, 24.62 - Safety
9 items
WebRail Balcony Post
73075
The WebRail Balcony Post by Tie Down is a versatile and secure solution designed specifically for balcony applications. This post can be firmly fastened to a concrete slab or decking, allowing the seamless passage of webbing for effective fall protection. Serving as either a corner post or an end post for WebRail webbing, this product offers flexibility in its application. With three optional installation methods—concrete anchor set, single brace anchor set, or terminating/end post set—users can choose the configuration that best suits their balcony setup. It's important to note that the required mounting hardware, although not included, is specific to each installation method, ensuring the precise and secure attachment of the WebRail Balcony Post for reliable fall protection in any balcony setting.
- USD
30 Inch Wide Super Steps - Full kit - 3 Modules and Pallet
72918
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Adjustable 35 in. to 48 in. Universal Guardrail Gate
72943
Tie Down's Adjustable Guardrail Gate Kit is your reliable solution for rooftop safety, offering versatility, compliance, and enhanced peace of mind on the job. Engineered to deliver robust fall protection, this kit is ideal for workers operating near roof edges, providing a crucial safety barrier. Designed for ultimate safety, this gate kit boasts a self-closing mechanism, ensuring it remains securely closed when not in use. This guardrail gate is built to fit universal guardrails ranging from 1-½ to 2 inches in round and square shapes. The adjustable gate width provides flexibility to suit your specific needs. The small gate adjusts from 24 inches to 36 inches, while the large gate adjusts from 35 inches to 48 inches. Meeting stringent safety standards, it complies with both OSHA 1926.502 and CSA Z259.18.19 regulations, ensuring workplace safety. Intended for application on flat, level roofs with a maximum pitch of ½ inch per foot, this kit is versatile and adaptable to various roofing scenarios.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
10 ft. Galvanized Guardrail
70764
Tie Down's 10 ft. Universal Guardrail is designed with the needs of professionals in mind, providing a better alternative to active fall protection systems. With its galvanized finish, the Universal Guardrail stands out as a highly visible safety measure on any job site. One of the key features of the Universal Guardrail is its versatility. It is specifically engineered to fit over 95% of competitor bases available in the market. The multi-pin slot feature allows for easy adjustment and compatibility with a variety of bases from different manufacturers. This eliminates the need for specific or proprietary bases, making it a flexible and cost-effective solution. The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Unlike active fall protection systems that require harnesses and lanyards, this guardrail system doesn't restrict movement or interfere with the job at hand. Workers can work with ease and efficiency, maximizing productivity and minimizing disruptions.
- USD
Adjustable 5.5 ft. - 7.5 ft. Roof Guardrail
70851
The Adjustable Guardrail by Tie Down Safety offers you the best option for closing the gaps in every safety guardrail system. The length adjusts on-site to achieve the perfect fit. No tools are required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at the top and mid-rail allows this safety guardrail system’s push and pull adjustment. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Red Perimeter Warning Line Pennant Set, 105 ft.
13865
The Red Perimeter Warning Line Pennant Set is made from high-quality materials. The warning lines in this set offer long-lasting performance, effectively marking hazardous areas and enhancing safety on the worksite. The set includes vinyl red pennants that provide high visibility, making it easy for workers to identify boundaries and potential hazards. The bright red color ensures that the warning line system serves its purpose effectively by preventing unauthorized access and promoting safety awareness. With 105 feet of high-strength rope and 30 vinyl red 18-inch pennants, the Red Perimeter Warning Line Pennant Set provides all the necessary components for an effective warning line system. Tie Down’s commitment to domestic manufacturing ensures that the Red Perimeter Warning Line Pennant Set meets rigorous quality standards, including compliance with OSHA 1926.501(b)(1) regulations, demonstrating its adherence to safety standards and requirements.
- USD
PX3 Penetrating Mobile Fall Protection System Supports 5 Workers
72810
The PX3 mobile fall protection system offers unparalleled portability while being 45% lighter than others on the market at 430 lbs. The PX3 lifts into place, allowing the users to quickly click off and get to work. When the work moves, the PX3 can quickly be relocated. Handling up to five workers at a time, three in fall arrest and two in fall restraint, this "best-in-class" solution ships job site ready on a standard pallet.
- USD
1 - 9 of 9
1