close
Filter By
Brand
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 140.00, 20.00, 32.39, 25.00, 0.67, 24.77, 33.00 - Safety
12 items
30 Inch Wide Super Steps - Full kit - 3 Modules and Pallet
72918
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
12 in. Swivel Cap Commercial Roof Anchor with 16 in. Base
70864-S16
Tie Down's 12 in. Galvanized Swivel Cap with 16 in. Base Anchor is your go-to choice for a range of safety applications. Crafted with care in the USA, this anchor features a sturdy ? in. base thickness and a 16 in. x 16 in. size to ensure stability. Its bolt and/or screw-on attachment type simplifies installation. These anchors are compatible with wood, metal, and concrete substrates, offering a wide array of options to cater to your specific needs. Designed to extend through the roof, this anchorage post remains accessible during and after construction. With a riser height ranging from 8 in. to 36 in., it accommodates diverse fall protection applications. Crafted from durable galvanized steel that conforms to ASTM standards, you can trust in its reliability and longevity. Whether it's for window washing tieback applications or creating a hands-free fall arrest system for perimeter work, this anchor is adaptable and up to the task.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Adjustable 35 in. to 48 in. Universal Guardrail Gate
72943
Tie Down's Adjustable Guardrail Gate Kit is your reliable solution for rooftop safety, offering versatility, compliance, and enhanced peace of mind on the job. Engineered to deliver robust fall protection, this kit is ideal for workers operating near roof edges, providing a crucial safety barrier. Designed for ultimate safety, this gate kit boasts a self-closing mechanism, ensuring it remains securely closed when not in use. This guardrail gate is built to fit universal guardrails ranging from 1-½ to 2 inches in round and square shapes. The adjustable gate width provides flexibility to suit your specific needs. The small gate adjusts from 24 inches to 36 inches, while the large gate adjusts from 35 inches to 48 inches. Meeting stringent safety standards, it complies with both OSHA 1926.502 and CSA Z259.18.19 regulations, ensuring workplace safety. Intended for application on flat, level roofs with a maximum pitch of ½ inch per foot, this kit is versatile and adaptable to various roofing scenarios.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Steel with Coating Collapsible Guardrial
70854
Tie Down's Collapsible Guardrail is your lightweight and portable solution for roofing safety. With its collapsible bracket design featuring two safety pins (included), installation is hassle-free with no tools required. The non-penetrative design ensures your roof's integrity remains intact. It's easy to collapse and reset, and if needed, it can provide a sturdy, permanent raised fit. Made from galvanized steel with a coating, this guardrail is not only robust but also resistant to the elements. Its hinged brackets allow the guardrail to fold back easily, never towards the roof edge, ensuring maximum safety during rooftop operations. With a product weight of just 33 lbs., it offers both convenience and durability for all your roofing safety needs.
- USD
8 in. Commercial Roof Anchor
70861-L16
Tie Down's Commercial Roof Anchor is a reliable, easy-to-install, and versatile solution for ensuring the safety of workers in environments where fall protection is essential. Its robust construction and regulatory compliance make it a valuable addition to your safety equipment arsenal. Crafted from durable steel and featuring a galvanized finish, this roof anchor is engineered to provide a secure and dependable attachment point for various fall protection systems. This anchor is a versatile addition to your safety equipment. It can be employed as a crucial component of a fall arrest system or for tasks like window washing, ensuring safety for workers in high-risk environments. The Commercial Roof Anchor is designed to work seamlessly with a range of fall protection equipment, including retractable lifelines, vertical lifelines, rope grab units, and horizontal lifeline systems. Its versatility makes it suitable for various applications. This anchor meets compliance with OSHA 1910 and OSHA 1926 Subpart M regulations, giving you peace of mind regarding safety and regulatory adherence. The roof anchor extends through the roof, making it accessible during and after construction. Its design ensures that it fits a wide range of fall protection applications. The riser height can be adjusted from 8 in. to 36 in., providing flexibility to meet your specific needs.
- USD
Jamb Door/ Window Anchor, 1-Pack
65078Z
The Door and Window Jamb Anchor by Tie Down Engineering acts as a portable fall protection anchor point designed for fall arrest. The design works in locations where a door or window frame provides a safe, secure, and temporary fall protection anchor point. This Door and Window Jamb Anchor fits openings from 24 inch to 52 inch wide and offers a simple installation. The fully adjustable and lightweight design makes for an easy fall protection anchor point. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Fitting Al Open End
13705A
Tie Down's Zip Rail Fittings offer versatile solutions for safety rail systems. These fittings are available in steel piping with various color options including yellow, black, blue, and galvanized. They are designed for easy installation without the need for special tools and are constructed from durable cast iron or aluminum materials. Compatible with safety yellow, galvanized, or custom color safety rails, these fittings meet OSHA compliance standards. They provide flexibility for designing both interior and exterior safety rail systems, allowing users to customize layouts to suit specific applications and requirements.
- USD