close
Categories
Filter By
Compatible with
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 3
- 14.00 1
- 14.43 1
- 140.00 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 2.19 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 10.21, 630.00, 24.77, 24.62 - Safety
6 items
WebRail Balcony Post
73075
The WebRail Balcony Post by Tie Down is a versatile and secure solution designed specifically for balcony applications. This post can be firmly fastened to a concrete slab or decking, allowing the seamless passage of webbing for effective fall protection. Serving as either a corner post or an end post for WebRail webbing, this product offers flexibility in its application. With three optional installation methods—concrete anchor set, single brace anchor set, or terminating/end post set—users can choose the configuration that best suits their balcony setup. It's important to note that the required mounting hardware, although not included, is specific to each installation method, ensuring the precise and secure attachment of the WebRail Balcony Post for reliable fall protection in any balcony setting.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Adjustable 35 in. to 48 in. Universal Guardrail Gate
72943
Tie Down's Adjustable Guardrail Gate Kit is your reliable solution for rooftop safety, offering versatility, compliance, and enhanced peace of mind on the job. Engineered to deliver robust fall protection, this kit is ideal for workers operating near roof edges, providing a crucial safety barrier. Designed for ultimate safety, this gate kit boasts a self-closing mechanism, ensuring it remains securely closed when not in use. This guardrail gate is built to fit universal guardrails ranging from 1-½ to 2 inches in round and square shapes. The adjustable gate width provides flexibility to suit your specific needs. The small gate adjusts from 24 inches to 36 inches, while the large gate adjusts from 35 inches to 48 inches. Meeting stringent safety standards, it complies with both OSHA 1926.502 and CSA Z259.18.19 regulations, ensuring workplace safety. Intended for application on flat, level roofs with a maximum pitch of ½ inch per foot, this kit is versatile and adaptable to various roofing scenarios.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized 12 Plate Hippo Anchor Deadweight System
65219G
The ultimate solution for rooftop fall protection without the need for roof penetration, Tie Down's Hippo Anchor Deadweight System offers exceptional fall arrest and fall restraint capabilities, ensuring the safety of workers at heights. Crafted with precision, it's designed to prevent leaks and protect your roof from damage, making it an ideal choice for both temporary and permanent applications. Choose between the 12-plate configuration, which requires a 10-foot distance from the leading edge, or the 16-plate configuration with an 8-foot leading edge requirement, depending on your specific needs. This system meets stringent compliance standards, including OSHA 1926.502, ASSE Z359.1, CSA 259, and Military Code EM 385-1, ensuring peace of mind regarding safety and regulatory adherence. The central anchor is strategically raised to minimize fall travel distance, further enhancing safety. This system is compatible with lanyards with a maximum arresting force of 900 lbs. and can be used with roofs with up to a 5° pitch.
- USD
PX3 Rescue Winch System with 100 ft. of Galvanized Lifeline
72819
With the PX3 Rescue Winch System, you have the confidence and capability to rescue fallen workers securely and efficiently. Designed as an accessory tool to rescue a fallen worker securely, it enables precise control and reliable lifting or lowering of the worker to safety with its manual winch. Equipped with 100 feet of galvanized lifeline, this assembly provides sufficient length to handle rescue operations effectively whether it's lowering or raising the worker. The PX3 Rescue Winch System is designed to quickly and easily attach to the PX3 Mobile Fall Protection System.
- USD
1 - 6 of 6
1