close
Filter By
Brand
Compatible with
Compliance
Country of Origin
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 10.21, 30.00, 55.70, 9.00, 825.00, 14.43, 0.22 - Safety
11 items
5.5 ft. - 9.75 ft. Platform Crossover Toeboard
73067
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
Hatch Railing Complete Kit with 48 x 48 Hatch Rail Gate Included
71089
The Hatch Railing Complete Kit by Tie Down is your comprehensive solution for meeting fall protection standards and enhancing safety around roof and floor openings. This “best in class” out of the box system eliminates the hazard of exposed sides of ground openings. This lightweight guardrail system provides floor opening fall protection for anyone working in or around dangerous gaps on walking and working surfaces. OSHA 1910.23 requires guardrail protection around exposed openings on any walking and working surfaces. If not protected properly, citations and injury could occur. The Hatch Railing Complete Kit is made of metal and coated with our proprietary Safety Yellow coating. Utilizing our aluminum drop in fittings, installation time is within minutes. The self-closing gate is manufactured with a heavy-duty spring, ensuring continuous closure of the hatch gate. The pipe ends and tops feature a plastic fitting. The bolts and washers are 3/8” x 2-1/2” grade Z, zinc plated. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Tie Down Engineering Zip Rail Pipe Fittings Single Socket Tee
13750
Tie Down's Zip Rail Fittings offer versatile solutions for safety rail systems. These fittings are available in steel piping with various color options including yellow, black, blue, and galvanized. They are designed for easy installation without the need for special tools and are constructed from durable cast iron or aluminum materials. Compatible with safety yellow, galvanized, or custom color safety rails, these fittings meet OSHA compliance standards. They provide flexibility for designing both interior and exterior safety rail systems, allowing users to customize layouts to suit specific applications and requirements.
- USD
18 in. Flat-Free Replacement Wheel/ Tire 30 lbs. | Ribbed Tread
13844
The Flat Free Tires by Tie Down feature polyurethane, a solid substance that never requires air and is not vulnerable to leaks or punctures. This replacement wheel fits the PX5 or can be purchased separately to upgrade and enhance your own material carts. Every accessory or component product found at Tie Down is made by industry leaders. For over 50 years, Tie Down has maintained high standards and quality control through quality raw materials and components made in the USA.
- USD
21.5 in. x 26 in. Residential Roofing Aluminum Ladder Dock
70832
Tie Down Engineering's Residential Ladder Dock provides a safe access point for ladders on the roof edge of a building. This ladder accessory drastically improves the overall safety of your workers and is considered a best practice when ladders are being used. This roofing tool allows safe entry onto the roof and protects the roof from damage caused by ladders resting on eaves and roof edges. The Residential Ladder Dock is made of strong, industrial grade aluminum, and is compatible with most ladders. This ladder tie off is slip resistant and includes safety chains for additional security. The Tie Down Engineering Residential Ladder Dock can be used on a variety of roof pitches up to a 6/12 pitch.
- USD