close
Filter By
Color
Compatible with
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
58.00, 10.21, 185.00, 70.00, 11.93, 24.62, 10.60, 29.00 - Safety
9 items
4 ft. - 7.5 ft. Platform Crossover Toeboard
73068
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
WebRail Balcony Post
73075
The WebRail Balcony Post by Tie Down is a versatile and secure solution designed specifically for balcony applications. This post can be firmly fastened to a concrete slab or decking, allowing the seamless passage of webbing for effective fall protection. Serving as either a corner post or an end post for WebRail webbing, this product offers flexibility in its application. With three optional installation methods—concrete anchor set, single brace anchor set, or terminating/end post set—users can choose the configuration that best suits their balcony setup. It's important to note that the required mounting hardware, although not included, is specific to each installation method, ensuring the precise and secure attachment of the WebRail Balcony Post for reliable fall protection in any balcony setting.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
7.5 ft. Ladder Guardrail Corral
72883
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends either 7.5 or 15 ft. onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
Adjustable 5.5 ft. - 7.5 ft. Roof Guardrail
70851
The Adjustable Guardrail by Tie Down Safety offers you the best option for closing the gaps in every safety guardrail system. The length adjusts on-site to achieve the perfect fit. No tools are required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at the top and mid-rail allows this safety guardrail system’s push and pull adjustment. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Warning Line System w/ 100 ft. of Pennants and 4 Support Legs
65002
The Folding Warning Line System by Tie Down holds the warning line with 4-leg support. This system includes 100 ft. of warning line pennants and pre-galvanized stanchions with a clear coat finish. This system prevents rusting from the inside out. The durability and ease of use makes the set-up simple and quick. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
PX3 Rescue Winch System with 100 ft. of Galvanized Lifeline
72819
With the PX3 Rescue Winch System, you have the confidence and capability to rescue fallen workers securely and efficiently. Designed as an accessory tool to rescue a fallen worker securely, it enables precise control and reliable lifting or lowering of the worker to safety with its manual winch. Equipped with 100 feet of galvanized lifeline, this assembly provides sufficient length to handle rescue operations effectively whether it's lowering or raising the worker. The PX3 Rescue Winch System is designed to quickly and easily attach to the PX3 Mobile Fall Protection System.
- USD
PX5 Rescue Winch Assembly with 100 ft. of Galvanized Lifeline
72831
With the PX5 Rescue Winch Assembly, you have the confidence and capability to rescue fallen workers securely and efficiently. Designed as an accessory tool to rescue a fallen worker securely, it enables precise control and reliable lifting or lowering of the worker to safety with its manual winch. Equipped with 100 feet of galvanized lifeline, this assembly provides sufficient length to handle rescue operations effectively whether it's lowering or raising the worker. The PX5 Rescue Winch Assembly is designed to quickly and easily attach to the PX5 Mobile Fall Protection System.
- USD
1 - 9 of 9
1