close
Filter By
Brand
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
42.53, 630.00, 25.00, 1142.00, 21.00, 185.00, 58.00 - Safety
11 items
Tie Down Engineering Hatch Mate | Universal Roof Access Hatch System | Roofing Hatch Safety Tools edit
73057
Tie Down’s Hatch Mate is the first roof hatch system to ensure universal mounting on either side of interior fixed ladders by requiring only six fasteners for attachment. Shipped fully assembled, its innovative design uses a chain mounted to an actuation pulley. This chain can be shortened or lengthened for roof heights up to 28 ft. Engineered for ease of use, this pulley system requires only several pulls on the chain to unlock and open the upper roof hatch and several pulls on the opposite side of the chain to close the hatch. To ensure permanent closure, the operator only needs to place the chain into the lock mounting bracket and lock with a standard lock and key.
- USD
Yellow Universal Compression Clamp (UCC) Guardrail Base
71091
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Galvanized Universal Compression Clamp (UCC) Guardrail Base
71091G
Tie Down Engineering stands as the premier manufacturer of passive systems, setting the industry standard for safeguarding building perimeters, stairways, and elevator shafts. Compliant with OSHA 1926.502, our Universal Compression Clamp Base Guardrail System is the epitome of seamless, user-friendly, and safe solutions. It seamlessly accommodates all upright guardrails on the market without the need for pins. Our innovative system installs effortlessly using an impact gun to tighten our Universal Compression Clamp, eradicating the common issue of wobbly, loose connections found in other systems. The UCC Base Guardrail System is designed to fit both 1.66 and 1.90 OD tubes, making it the most versatile and straightforward passive guardrail system for rooftop and job site applications. At Tie Down Engineering, we uphold rigorous standards and unwavering quality control, sourcing our raw materials and components exclusively from the USA.
- USD
Stack Pallet Kit - 11 Yellow 10 ft. Guardrails & 12 Socket Bases
70762
The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Engineered to hold 11 Universal Guardrails and 12 Socket Bases on a reinforced metal rack, the Stack Rack Kit includes up to 110 linear feet of guardrail protection, depending on the kit purchased. With its ability to stack perfectly for either side loading of a flatbed or end loading for a closed trailer, the Stack Rack’s metal frame allows three bundles of guardrails to be stacked for utmost convenience, allowing you to ship more linear feet per truckload than any other guardrail system.
- USD
7.5 ft. Ladder Guardrail Corral
72883
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends either 7.5 or 15 ft. onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail
70850
The Adjustable Guardrail by Tie Down Safety offer you the best option for closing the gaps on every safety guardrail system. The length adjusts on site to achieve the perfect fit. No tools required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid rail allows the push and pull adjustment of this safety guardrail system. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Galvanized 12 Plate Hippo Anchor Deadweight System
65219G
The ultimate solution for rooftop fall protection without the need for roof penetration, Tie Down's Hippo Anchor Deadweight System offers exceptional fall arrest and fall restraint capabilities, ensuring the safety of workers at heights. Crafted with precision, it's designed to prevent leaks and protect your roof from damage, making it an ideal choice for both temporary and permanent applications. Choose between the 12-plate configuration, which requires a 10-foot distance from the leading edge, or the 16-plate configuration with an 8-foot leading edge requirement, depending on your specific needs. This system meets stringent compliance standards, including OSHA 1926.502, ASSE Z359.1, CSA 259, and Military Code EM 385-1, ensuring peace of mind regarding safety and regulatory adherence. The central anchor is strategically raised to minimize fall travel distance, further enhancing safety. This system is compatible with lanyards with a maximum arresting force of 900 lbs. and can be used with roofs with up to a 5° pitch.
- USD
5 ft. Yellow Guardrail
70760
Tie Down's 5 ft. Universal Guardrail is designed with the needs of professionals in mind, providing a better alternative to active fall protection systems. With its powder coat painted safety yellow finish, the Universal Guardrail stands out as a highly visible safety measure on any job site. Its vibrant color enhances visibility, ensuring that workers can easily identify and navigate around the guardrail. One of the key features of the Universal Guardrail is its versatility. It is specifically engineered to fit over 95% of competitor bases available in the market. The multi-pin slot feature allows for easy adjustment and compatibility with a variety of bases from different manufacturers. This eliminates the need for specific or proprietary bases, making it a flexible and cost-effective solution. The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Unlike active fall protection systems that require harnesses and lanyards, this guardrail system doesn't restrict movement or interfere with the job at hand. Workers can work with ease and efficiency, maximizing productivity and minimizing disruptions.
- USD
Hatch Railing Complete Kit with 30 x 36 Hatch Rail Gate Included
71038
The Hatch Railing Complete Kit by Tie Down is your comprehensive solution for meeting fall protection standards and enhancing safety around roof and floor openings. This “best in class” out of the box system eliminates the hazard of exposed sides of ground openings. This lightweight guardrail system provides floor opening fall protection for anyone working in or around dangerous gaps on walking and working surfaces. OSHA 1910.23 requires guardrail protection around exposed openings on any walking and working surfaces. If not protected properly, citations and injury could occur. The Hatch Railing Complete Kit is made of metal and coated with our proprietary Safety Yellow coating. Utilizing our aluminum drop in fittings, installation time is within minutes. The self-closing gate is manufactured with a heavy-duty spring, ensuring continuous closure of the hatch gate. The pipe ends and tops feature a plastic fitting. The bolts and washers are 3/8” x 2-1/2” grade Z, zinc plated. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD