close
Categories
Filter By
Brand
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 3
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
200.00, 28.00, 20.27, 10.60, 21.50, 4.00, 630.00 - Safety
9 items
4 ft. - 7.5 ft. Platform Crossover Toeboard
73068
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
Tilt-Back Pallet Carrier Cart
73058
Tie Down's Tilt Back Pallet Carrier is a versatile and efficient solution for transporting a range of materials, from insulation to rubber rolls, with ease. Its large tires enable smooth movement on all types of decks, making it a valuable asset in various settings. The rear wheels are adjustable to change the tilt, providing enhanced control during transportation. This carrier isn't limited to traditional warehouse tasks; it's equally adept on job sites, effortlessly moving portable restrooms, water storage tanks, toolboxes, and more. Effortless maneuvering is ensured by the multi-piece formed handle and multi-axis casters, offering easy mobility on all surfaces. Safety is a top priority with the pinned caster lock preventing unwanted rotation and ensuring stability on sloped surfaces. The flat-free tires deliver reliable performance without the need for maintenance, and the all-steel frame guarantees long-lasting durability. With its adjustable tilt feature, the Tilt Back Pallet Carrier provides a safe and efficient transport solution for a variety of materials in diverse work environments.
- USD
7.5 ft. Galvanized Guardrail
70765
Tie Down's 7.5 ft. Universal Guardrail is designed with the needs of professionals in mind, providing a better alternative to active fall protection systems. With its galvanized finish, the Universal Guardrail stands out as a highly visible safety measure on any job site. One of the key features of the Universal Guardrail is its versatility. It is specifically engineered to fit over 95% of competitor bases available in the market. The multi-pin slot feature allows for easy adjustment and compatibility with a variety of bases from different manufacturers. This eliminates the need for specific or proprietary bases, making it a flexible and cost-effective solution. The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Unlike active fall protection systems that require harnesses and lanyards, this guardrail system doesn't restrict movement or interfere with the job at hand. Workers can work with ease and efficiency, maximizing productivity and minimizing disruptions.
- USD
Adjustable 24 in. to 36 in. Universal Guardrail Gate
72953
Tie Down's Adjustable Guardrail Gate Kit is your reliable solution for rooftop safety, offering versatility, compliance, and enhanced peace of mind on the job. Engineered to deliver robust fall protection, this kit is ideal for workers operating near roof edges, providing a crucial safety barrier. Designed for ultimate safety, this gate kit boasts a self-closing mechanism, ensuring it remains securely closed when not in use. This guardrail gate is built to fit universal guardrails ranging from 1-½ to 2 inches in round and square shapes. The adjustable gate width provides flexibility to suit your specific needs. The small gate adjusts from 24 inches to 36 inches, while the large gate adjusts from 35 inches to 48 inches. Meeting stringent safety standards, it complies with both OSHA 1926.502 and CSA Z259.18.19 regulations, ensuring workplace safety. Intended for application on flat, level roofs with a maximum pitch of ½ inch per foot, this kit is versatile and adaptable to various roofing scenarios.
- USD
Galvanized Warning Line System
65001
The Galvanized Warning Line System by Tie Down offers a complete, out-of-the-box roof warning line system solution. The galvanized system offers easy and simple installation that is ready to use in minutes. It includes four 24†platforms with handles for easy carrying on the job site and four 36†vertical line tubes that hold the warning line. This kit also includes 100’ of warning pennants and the hot dipped galvanized coating ensures a corrosion resistant system, especially against rough construction conditions. The Galvanized Warning Line System offers durability, ease of use, and a quick set-up. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Adjustable Guardrail Outer Sleeve for 8 ft. to 10 ft. Guardrail
70796
The Adjustable Guardrail Outer Sleeve by Tie Down is a component part for the Adjustable Guardrail System. The Out Sleeve allows the easy connection of two sides of a guardrail. The length adjusts easily, on a job site, to achieve the perfect fit. No special tools required! Accommodate any gaps in a guardrail system or block off any obstructions with the Adjustable Guardrail and the Outer Sleeve. Tie Down offers more than adjustability. The telescoping system eliminates the need for tools or pins. The telescoping tube rail allows the push and pull adjustment of the Adjustable Guardrail System. Choose from three Outer Sleeve options: 3.5-5 ft., 5.5 ft.-7.5 ft., and 8-10 ft. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA
- USD
Cast Iron And Aluminum Options Zip Rail Pipe Fittings 3.5 Ft. Pipe Galvanized Part Id: 70836-42g
70836-42G
Tie Down's Zip Rail Pipe Fittings are the epitome of strength and durability, available in your choice of either aluminum or steel cast materials. When paired with our galvanized rail sections, they create an exceptionally robust and enduring safety solution. Our Zip Rail Pipe Fittings can be used with safety yellow, galvanized, or even custom-colored safety rails, allowing you to tailor your guardrail system. To simplify the procurement process, Tie Down offers convenient kit options for the Zip Rail Fittings. These kits encompass all the essential components required for a comprehensive guardrail system, making it easy for users to acquire everything they need in a single package. Whether you opt for a DIY installation or enlist a contractor, you'll appreciate the straightforward setup process as no special tools are necessary, and the sections install rapidly. From industrial facilities and commercial buildings to construction sites and public spaces, these fittings empower you to create effective safety railings wherever they are needed.
- USD
Galvanized 12 Plate Hippo Anchor Deadweight System
65219G
The ultimate solution for rooftop fall protection without the need for roof penetration, Tie Down's Hippo Anchor Deadweight System offers exceptional fall arrest and fall restraint capabilities, ensuring the safety of workers at heights. Crafted with precision, it's designed to prevent leaks and protect your roof from damage, making it an ideal choice for both temporary and permanent applications. Choose between the 12-plate configuration, which requires a 10-foot distance from the leading edge, or the 16-plate configuration with an 8-foot leading edge requirement, depending on your specific needs. This system meets stringent compliance standards, including OSHA 1926.502, ASSE Z359.1, CSA 259, and Military Code EM 385-1, ensuring peace of mind regarding safety and regulatory adherence. The central anchor is strategically raised to minimize fall travel distance, further enhancing safety. This system is compatible with lanyards with a maximum arresting force of 900 lbs. and can be used with roofs with up to a 5° pitch.
- USD
24 in. Weld-On Commercial Roof Anchor
70873-LF
Tie Down Safety’s Commercial Roof Anchors (CRA) stand by the Made in the USA standards of Tie Down. We manufacture anchors compatible with wood, metal, and concrete substrates with a wide variety of options. The anchorage post functions by extending through the roof, accessible during and after construction. Attach our pass-through horizontal lifeline parts for a continual hands-free fall arrest system used for perimeter work. In most cases, our commercial roof anchors can be used in window washing tieback applications. The Tie Down Commercial Roof Anchor series includes durable, galvanized steel conforming to ASTM standards. These roof anchors fit nearly all fall protection applications, and the riser height ranges from 8” to 36.” Tie Down Safety keeps exacting standards and quality control through quality raw materials and components made in the USA.
- USD
1 - 9 of 9
1