close
Categories
Filter By
Brand
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
20.27, 31.30, 6.00, 4.00, 5.22, 140.00, 55.70 - Safety
9 items
Standing Seam Guardrail Assembly
70838
Tie Down's Standing Seam Guardrail Assembly is expertly crafted for standing seam roofs, serving as an essential component for constructing robust guardrails. The kit includes universal S-5 seam clamps, ensuring compatibility with various standing seam roof types. The base features slots that provide adjustability to fit different seam spacing, offering flexibility in installation. As part of the Zip Rail Fittings system, it acts as a foundational element for assembling reliable guardrails on elevated surfaces. Users have the option to customize their assembly by incorporating alternative Zip Rail Fittings beyond what is included in the kit, allowing for tailored configurations. The Standing Seam Guardrail Assembly includes the Standing Seam Guardrail Base (70838-1) and all necessary hardware, providing a comprehensive solution for creating secure guardrails on standing seam roofs.
- USD
30 Inch Wide Super Steps - Full kit - 3 Modules and Pallet
72918
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Adjustable 24 in. to 36 in. Universal Guardrail Gate
72953
Tie Down's Adjustable Guardrail Gate Kit is your reliable solution for rooftop safety, offering versatility, compliance, and enhanced peace of mind on the job. Engineered to deliver robust fall protection, this kit is ideal for workers operating near roof edges, providing a crucial safety barrier. Designed for ultimate safety, this gate kit boasts a self-closing mechanism, ensuring it remains securely closed when not in use. This guardrail gate is built to fit universal guardrails ranging from 1-½ to 2 inches in round and square shapes. The adjustable gate width provides flexibility to suit your specific needs. The small gate adjusts from 24 inches to 36 inches, while the large gate adjusts from 35 inches to 48 inches. Meeting stringent safety standards, it complies with both OSHA 1926.502 and CSA Z259.18.19 regulations, ensuring workplace safety. Intended for application on flat, level roofs with a maximum pitch of ½ inch per foot, this kit is versatile and adaptable to various roofing scenarios.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Steep Slope Guardrail
65014
Complying with OSHA 1926.502(b)(1) standards, Tie Down's Steep Slope Guardrail is engineered for top-tier safety on steep roofs. Crafted with meticulous attention to quality, this guardrail system combines high-grade materials made in the USA, ensuring exceptional corrosion resistance and long-lasting durability. Adaptability is at the core of this guardrail's design, offering five adjustable pitch positions ranging from 4/12 to 16/12. This versatility enables you to confidently work on a variety of roof slopes while maintaining precise positioning and utmost safety. Each Steep Slope Guardrail includes an extra wing nut and bolt, adding convenience and flexibility during installation and adjustment. With a maximum spacing of 8 ft., it ensures ample coverage and security. This robust system can handle the demands of the job, supporting both worker safety and efficient construction processes. The adjustable rail brackets simplify attachment to standard 2 x 4's, ensuring a snug fit and streamlining installation. This system comes with two per master carton.
- USD
Adjustable Guardrail Outer Sleeve for 8 ft. to 10 ft. Guardrail
70796
The Adjustable Guardrail Outer Sleeve by Tie Down is a component part for the Adjustable Guardrail System. The Out Sleeve allows the easy connection of two sides of a guardrail. The length adjusts easily, on a job site, to achieve the perfect fit. No special tools required! Accommodate any gaps in a guardrail system or block off any obstructions with the Adjustable Guardrail and the Outer Sleeve. Tie Down offers more than adjustability. The telescoping system eliminates the need for tools or pins. The telescoping tube rail allows the push and pull adjustment of the Adjustable Guardrail System. Choose from three Outer Sleeve options: 3.5-5 ft., 5.5 ft.-7.5 ft., and 8-10 ft. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA
- USD
Cast Iron And Aluminum Options Zip Rail Pipe Fittings 3.5 Ft. Pipe Galvanized Part Id: 70836-42g
70836-42G
Tie Down's Zip Rail Pipe Fittings are the epitome of strength and durability, available in your choice of either aluminum or steel cast materials. When paired with our galvanized rail sections, they create an exceptionally robust and enduring safety solution. Our Zip Rail Pipe Fittings can be used with safety yellow, galvanized, or even custom-colored safety rails, allowing you to tailor your guardrail system. To simplify the procurement process, Tie Down offers convenient kit options for the Zip Rail Fittings. These kits encompass all the essential components required for a comprehensive guardrail system, making it easy for users to acquire everything they need in a single package. Whether you opt for a DIY installation or enlist a contractor, you'll appreciate the straightforward setup process as no special tools are necessary, and the sections install rapidly. From industrial facilities and commercial buildings to construction sites and public spaces, these fittings empower you to create effective safety railings wherever they are needed.
- USD
Roof Cart Aluminum Deck
72837
- USD
1 - 9 of 9
1