close
Categories
Filter By
# users on fall restraint
Anchor Type
Compatible with
Compliance
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 1.62 1
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 3
- 2.00 8
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 1
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 2
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
1200.00, 17.00, 517.00, 70.00, 185.00, 32.93, 0.07, 982.33 - Safety
10 items
Galvanized 7.5 ft. Ladder Guardrail Corral
72883G
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends 7.5 o onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
Galvanized 15 ft. Ladder Guardrail Corral
72884G
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends 15 ft. onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
60 ft. WebRail Kit - Portable Fall Arrest & Tensioned Guardrail System
73073
Tie Down's 60 ft. WebRail represents a revolutionary advancement in fall protection due to its patented technology that offers both fall arrest and passive protection without penetrating the structure. The WebRail kit attaches to the WebRail vertical fall arrest support rather than the building column, ensuring that in the event of a fall, workers are prevented from colliding with the floor or column. With an impressive capacity for up to four users in fall arrest per single span of webbing, the top, mid, and toe webbing is rated at an impressive 20,000 lbs., exceeding OSHA 1926 and 1910 requirements. The 4 in. DOT webbing is fire retardant, UV-resistant, and chafe-resistant, ensuring durability and longevity. Versatile and accommodating, it is designed for use with both round and square columns, offering adaptability to various structures. This WebRail is an integral component of a fall protection system, compatible with lanyards or SRL vertical fall protection lifelines, providing comprehensive safety assurance on the job.
- USD
PX5 Original Penetrating Mobile Fall Protection System Supports 7 Workers
72838
Tie Down manufactures the best-in-class mobile fall protection systems. Contractors often need safety solutions that offer versatility while being easy to use. The revolutionary PX5 ships job-site ready and safely protects up to seven workers at a time. Weighing less than 550 lbs., the PX5 provides fall arrest safety for 5 workers and an additional 2 workers in restraint, all at the same time. With front and rear braking, the PX5 is engineered to penetrate the substrate in the event of a fall. The 1st and 5th tie-off points provide a 45-degree angled use making the PX5 the only system on the market tested at such an angle.
- USD
Universal Base Replacement Rubber Feet
70829
Tie Down's Replacement Rubber Feet provide a convenient solution for maintaining the integrity of your Universal Bases. Designed specifically for use with universal bases, they act as protective buffers, preventing the base from rubbing against or scratching the roof surface. This not only ensures the longevity of your fall protection equipment but also contributes to the safeguarding of the rooftop environment. Easy to install and replace, these rubber feet offer a cost-effective way to maintain the performance and safety features of your fall protection system.
- USD
Yellow 7.5 ft. Ladder Guardrail Corral
72883
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends 7.5 ft. onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
42 in. x 7.5 in. x 3 in. FitRight Guardrail
72908
Tie Down's FitRight Guardrail Post is the optimal solution for ensuring safety in multi-family, senior living, and student housing projects. Crafted from powder-coated and galvanized steel, this post offers durability and longevity while providing essential protection for balconies, slab edges, and stairways. With its adjustable height settings and convenient wingnut adjustments, installation and customization are effortless, allowing for precise fitting to various post bases and pedestals. Its innovative design facilitates safe completion of slab work without the hassle of rail removal, making it a versatile and practical choice for construction projects.
- USD
Warning Line System w/ 100 ft. of Pennants and 4 Support Legs
65002
The Folding Warning Line System by Tie Down holds the warning line with 4-leg support. This system includes 100 ft. of warning line pennants and pre-galvanized stanchions with a clear coat finish. This system prevents rusting from the inside out. The durability and ease of use makes the set-up simple and quick. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
12 in. Screw-On Commercial Roof Anchor with 16 in. x 16 in. Base
70864-L16
Tie Down's 12 in. Screw On 16x16 Base Anchor is your go-to choice for a range of safety applications. Crafted with care in the USA, this anchor features a sturdy 3/8 in. base thickness and a 16 in. x 16 in. size to ensure stability. Its screw-on attachment type simplifies installation. These anchors are compatible with wood, metal, and concrete substrates, offering a wide array of options to cater to your specific needs. Designed to extend through the roof, this anchorage post remains accessible during and after construction. With a riser height ranging from 8 in. to 36 in., it accommodates diverse fall protection applications. Crafted from durable galvanized steel that conforms to ASTM standards, you can trust in its reliability and longevity. Whether it's for window washing tieback applications or creating a hands-free fall arrest system for perimeter work, this anchor is adaptable and up to the task.
- USD