close
Filter By
Brand
Color
Country of Origin
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 18.46 1
- 185.00 1
- 2.00 9
- 2.02 1
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 225.00 1
- 2390.00 1
- 24.62 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 2
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 3
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 703.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 982.33 1
- 999.00 2
Warranty
10.60, 1190.00, 100.00, 61.00, 902.00, 55.70, 56.00 - Safety
8 items
4 ft. - 7.5 ft. Platform Crossover Toeboard
73068
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
40 Inch Wide Super Steps - 3 Modules and Pallet
72920
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
Yellow Socket Guardrail Base Assembly
71094
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Galvanized Socket Guardrail Base Assembly
71094G
Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and temporary applications, it meets OSHA 1926.502 and 1910 Subpart D standards, all without penetrating the roof substrate. The coating ensures extreme longevity while its installation time is slashed by over 30%, requiring no drilling or tools. This versatile base fits seamlessly between standing seams and is tested to withstand Category 5 hurricane wind forces. Added benefits include a protective rubber footing, economical shipment costs, and multi-directional adaptability for all your safety needs.
- USD
Universal Guardrail Base Dolly
70767
Built to endure the toughest job site conditions, the Guardrail Base Dolly is your dependable companion for handling Universal Guardrail Bases. Its robust construction ensures exceptional durability, guaranteeing reliable support for your guardrail system over the long haul. Equipped with top-quality flat-free tires, this dolly effortlessly glides across various terrains without the risk of punctures or flats. The Guardrail Base Dolly streamlines the setup of your Universal Guardrail system by allowing you to transport up to 2 bases at a time. This not only saves time but also reduces effort during installation. Designed with portability in mind, this dolly weighs a mere 61 lbs. Its compact and lightweight design ensures easy transport and convenient storage, maximizing efficiency on the job site. Experience enhanced mobility with the dolly's ergonomic handle, which enables you to maneuver effortlessly through tight spaces, improving overall job site mobility.
- USD
Metal Frame Roof Guardrail Stack Pallet Only
70769
Tie Down's Yellow Guardrail Stack Pallet Kit offers a convenient and organized solution for storing and transporting guardrails and universal bases. The kit includes a sturdy pallet with a metal frame that can securely hold up to 11 guardrails and 12 universal bases. The guardrails are designed to stack, allowing for easy side loading or end loading onto the pallet. The Stack Rack, with its durable metal frame, enables the stacking of multiple pallets up to three racks high, optimizing storage space. Available in both yellow coating and galvanized, this kit provides a practical and efficient way to manage and transport guardrails and bases, ensuring easy accessibility and minimizing clutter on job sites.
- USD
Yellow Stack Pallet Kit - 11 10 ft. Guardrails & 12 UCC Bases
71762
Tie Down's Universal Guardrail Stack Rack Kit with UCC Bases includes 11 guardrails and 12 bases, offering a robust safety setup for your worksite. Weighing in at 40% of the weight of most competitors, it's significantly lighter without compromising on strength and durability. The Universal Guardrail included in this kit is designed to provide unparalleled freedom of movement for workers. Unlike active fall protection systems, which often require harnesses and lanyards, this guardrail system allows employees to perform their tasks without hindrance. Our Universal Compression Clamp (UCC) Bases are the heart of this system. They seamlessly integrate with over 95% of competitor upright guardrails, eliminating the need for pins. Installation is hassle-free with the simple use of an impact gun, ensuring a secure and wobble-free system. These bases are versatile, accommodating both 1.66 and 1.90 OD tubes, and are meticulously crafted from high-quality raw materials and components sourced exclusively from the USA. For added convenience, these bases stack three at a time, reducing shipping costs and simplifying storage. You can also opt for the grommeted padding feature for enhanced protection. Plus, this system is suitable for use on roofs with pitches of up to 2/12, ensuring OSHA compliance and comprehensive safety on your worksite.
- USD
24 in. Bolt-On Commercial Roof Anchor with 16 in. x 16 in. Base
70873-L16
Tie Down's 24 in. Screw On 16x16 Base Anchor is your go-to choice for a range of safety applications. Crafted with care in the USA, this anchor features a sturdy 1/2 in. base thickness and a 16 in. x 16 in. size to ensure stability. Its bolt-on attachment type simplifies installation. These anchors are compatible with wood, metal, and concrete substrates, offering a wide array of options to cater to your specific needs. Designed to extend through the roof, this anchorage post remains accessible during and after construction. With a riser height ranging from 8 in. to 36 in., it accommodates diverse fall protection applications. Crafted from durable galvanized steel that conforms to ASTM standards, you can trust in its reliability and longevity. Whether it's for window washing tieback applications or creating a hands-free fall arrest system for perimeter work, this anchor is adaptable and up to the task.
- USD
1 - 8 of 8
1