close
Categories
Filter By
Brand
Country of Origin
Division
Height (in.)
Length (in.)
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 3
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 14
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
8.48, 0.40, 2.00, 0.33, 0.58, 1.92, 0.90, 2.28 - Marine
18 items
1-1/2 in. x 5 in. Standard Grade Washer Plate
24284
Elevate the strength and stability of your construction projects by utilizing two washer plates with each angle. This strategic approach ensures robust support and enhances the overall integrity of your structures. With the 1-1/2 in. x 5 in. dimensions of our washer plates, you can count on a secure and reliable connection between angles. Their size provides ample surface area for enhanced grip and load-bearing capacity. Enjoy peace of mind knowing that your angles are reinforced with the use of two washer plates. This additional layer of support adds a level of confidence in the longevity and structural integrity of your projects. Our washer plates are meticulously crafted with quality materials, ensuring durability and performance in demanding applications.
- USD
Plastic Step Fender Brackets for Large Plastic Fenders
44141
Tie Down's Step Fender Brackets are galvanized metal brackets that accommodate large plastic fenders, providing a secure and reliable mounting option. Designed for compatibility with large plastic fenders, these brackets ensure a perfect fit for tires. With their galvanized construction, these brackets are built to withstand the harsh marine environment, offering exceptional durability and corrosion resistance. They provide a sturdy and reliable attachment point for your fenders, ensuring they stay securely in place during transportation and while moored.
- USD
1/2 in. welded Commercial Grade Female Outside Corner
26400
The Outside Corner/Female is an essential component for creating a seamless connection between dock sections, ensuring a smooth and continuous surface for easy navigation and access. Its quick and straightforward installation process requires a 3/4-inch bolt set or connector pin and allows you to connect your docks effortlessly, saving you time and effort. With each leg measuring 10 inches by 5 inches, the Outside Corner/Female provides robust support and strength to your dock system. Crafted with high-quality materials, the Outside Corner/Female is built to withstand the rigors of marine environments. It offers excellent resistance to corrosion and maintains its strength and integrity over time, ensuring long-lasting performance. The Outside Corner/Female is suitable for a variety of dock configurations and applications. Whether you have a residential dock or a commercial marina, this component provides a versatile solution for creating a sturdy and reliable dock system.
- USD
Amber 4 in. Bow Roller Assembly with End Bells, 1/2 in. Shaft
86142
Designed to prevent your boat from scraping against bolts or the roller bracket, Tie Down's Bow Rollers provide superior boat protection by minimizing potential damage and preserving the integrity of your boat's hull. In addition to protecting your boat, these bow rollers also assist in aligning your boat on the trailer. With their specialized design, they help center the boat, preventing bow-to-bow stand contact and ensuring proper alignment during loading and unloading. This feature not only makes the process easier but also helps maintain the balance and stability of your boat on the trailer. Built to support the weight of the boat on the trailer, they are engineered to withstand the load and absorb road shock, providing a secure and stable transportation experience. This ensures that your boat remains secure and protected during transit, even on rough roads or uneven terrain. Acting as a buffer for the boat's bow, they provide a soft and cushioned surface that reduces impact and minimizes the risk of damage to both the boat and the trailer. This feature adds an extra layer of protection and peace of mind during transportation. With a ½ in. shaft and coming in lengths of 3 in. and 4 in., the bow roller assemblies are all-inclusive, including nuts, two washers, and end bells.
- USD
12 in. 2-3/4 in. BUNK BOARDS BOLSTER Swivel BRACKETS
81221
Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
- USD
4 in. Amber PVC Spool Type Keel Roller with 5/8 in. Shaft
86284
Tie Down Engineering's Keel Roller is a versatile and essential component for your boat trailer, acting as boat trailer roller guides to ensure the centering of your boat on the boat trailers. This boat trailer keel roller serves as a replacement part for any warped or distorted boat rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, these boat trailers rollers help prevent the boat from shifting side to side and ensure proper alignment, simplifying the launching and retrieval process. Using multiple boat keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, these keel boat trailer rollers are designed to withstand abrasion and resist salt corrosion, making this boat keel roller suitable for both freshwater and saltwater environments, ensuring long-lasting performance and reliable functionality even in harsh marine conditions.
- USD
7/16 in.-14 2-1/16 in. 2-5/16 in. Zinc Plated Square U-Bolt Kits
86228
Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
- USD
7/16 in.-14 3-1/16 in. 4-5/16 in. Zinc Plated Square U-Bolt Kits
86231
Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
- USD
5/8 in. x 11-1/4 in. Zinc-Plated Roller Shaft, Bulk
86040
Tie Down's Roller Shaft, a versatile and reliable component for various applications is made with high-quality zinc-plated steel and offers exceptional durability and corrosion resistance. The packaged kit includes the roller shaft itself along with two cap nuts, providing you with everything you need for easy installation. Additionally, the roller shaft is available in two diameters: ½" and ?", allowing you to choose the size that best fits your specific requirements.
- USD