close
Categories
Filter By
Brand
Country of Origin
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 10
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
7.00, 7.82, 6.26, 4.76, 1.82, 0.44, 12.00, 0.84 - Marine
12 items
3/4 in. Galv CONNECTOR PIN SET
26531
Experience quick and hassle-free disconnects with Tie Down's Connector Pin Set, a reliable solution for connecting male and female T connectors. This set is designed to provide a secure and efficient connection between the two connectors, ensuring stability and durability. It includes a galvanized 3/4 in. connector pin and a hitch clip pin, both crafted for maximum strength and corrosion resistance. With this connector pin set, you can easily assemble and disassemble your T connectors as needed, making it convenient for various docking applications.
- USD
16 in. x 3 in. Commercial Grade Heavy Duty Piling Hoop
26391
Our Commercial Grade Heavy Duty Piling Hoops are built to last, crafted from high-quality galvanized 1/4-inch steel. The galvanized coating on our piling hoops makes them suitable for harsh marine environments where exposure to saltwater and other corrosive elements is common, ensuring long-lasting performance. Our piling hoops offer robust support with a height of 3 inches, effectively safeguarding your pilings from damage and wear. Their sturdy construction ensures reliable coverage, providing added stability and protection. We offer piling hoops in four different sizes, designed to fit piling diameters ranging from 8 to 14 inches. This versatility allows for easy adaptation to various piling applications, ensuring a secure and precise fit. Our piling hoops are designed for convenient installation. The pre-drilled holes and included hardware make the installation process straightforward and hassle-free, saving you time and effort. Each hoop undergoes rigorous testing to meet the highest standards of durability and performance, providing you with a reliable and trusted solution for your piling protection needs.
- USD
1/2 in. x 1 in. bolt & nyloc nuts (2x) Swivel Bracket, Pair
86160
The ideal solution for providing reliable support to bunk boards on your boat trailer, Tie Down's Swivel Brackets are specifically designed to allow for a slight degree of swiveling or shifting, accommodating the movement of the bunk boards. The 2 Pack includes a 1/2 in. x 1 in. bolt and two nyloc nuts, ensuring easy and secure installation. Crafted with hot-dip galvanized steel, these swivel brackets are built to withstand the rigors of marine environments, providing long-lasting protection against corrosion.
- USD
3 in. x 16 in. Black Bunk Slicks, 10-pack
86164
Tie Down's PVC molded Bunk Slicks are designed to bolt directly onto your carpeted bunk boards, offering a smooth surface that allows your boat to slide on and off the trailer with ease. Compatible with any standard bunk board, our Bunk Slicks provide a versatile and convenient solution for enhancing your boat trailer's bunk support. Available in two sizes, each pack contains 10 Bunk Slicks, ensuring ample coverage and support for your valuable watercraft. Measuring 3 inches wide by 16 inches in length, our Bunk Slicks offer optimal boat support while maintaining a compact and streamlined design.
- USD
24 in. to 36 in. Adjustable Floating Pontoon Guide Ons, Pairs
86468
Designed for submerged trailers, the PVC boat trailer guide post automatically rises upward adding an additional 12 in. visibility, for a total adjustable viewing height of 24 in. to 36 in. Bright orange end caps on these PVC posts provide a clear target when loading your pontoon boat. The pontoon guides are designed to be mounted between the pontoons. Made of 1-1/2 in. square, 16 gauge steel galvanized tubing and covered by 2 in. x 20 in. PVC pipe, these boat trailer guide poles extend fully into the PVC tube for additional strength. These boat trailer post guides mount to trailer cross members 2 in. wide by 2 in., 3 in. or 4 in. high. All mounting hardware is included in this boat trailer guides poles kits. These pontoon trailer parts are sold in pairs.
- USD
15 in. x 3.5 in. Amber Standard PVC Keel Pad
86291
Tie Down's Keel Pad is the ultimate solution to protect your boat's bow hull from potential damage caused by metal contact during transportation on your trailer. Specifically designed to go on the cross member or axle, this keel pad is strategically placed in the center of the trailer to ensure maximum protection for your boat. Crafted from high-quality polyvinyl material, the keel pad offers exceptional durability, and its cut and fade-resistant properties ensure it maintains its appearance for years to come. As your boat navigates through both saltwater and freshwater conditions, this keel pad remains resilient and reliable, shielding your vessel from markings and absorbing impacts. With its cushion-like design, the keel pad acts as a protective barrier, preventing any accidental damage to your boat's hull during loading, unloading, and transportation.
- USD
5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack
86275
Crafted with sturdy solid steel, Tie Down's Spring Hangers offer the strength and durability required to withstand the demands of towing. Our rear hangers are designed for use on slipper springs measuring 1-3/4 inches to 2 inches wide, with a capacity of 5,200 lbs. to 8,000 lbs., making them suitable for medium-duty axles. These hangers are constructed from 1/4-inch stock steel, ensuring robust performance and reliability. Ideal for slipper and double-eye springs mounted on medium-duty axles with a capacity of 1,000 lbs. to 3,500 lbs., our front spring hangers offer dependable support for your trailer's suspension system. Pre-drilled for 9/16-inch bolts, these hangers ensure easy installation and a secure fit. Our spring hangers come in raw unfinished steel, providing a versatile option for customization or finishing to match your trailer's aesthetics. Each pack contains one spring hanger, providing a convenient and cost-effective solution for your trailer's suspension needs.
- USD
12H Danforth Hi-Tensile Anchor, 1,800 lbs. Holding Power
94020
Danforth Hi-Tensile Anchors are boat anchors engineered to deliver maximum holding power and quick deep bottom penetration. Crafted with high-grade 4130 steel, each shank is heat-treated for exceptional strength while the hot-dip galvanized coating ensures long-lasting protection against corrosion. Weighing just 12 lbs., these boat anchors offer impressive holding power of 1800 lbs., making them reliable and efficient. Suitable for boat lengths ranging from 31 to 42 ft., Danforth Boat Anchors are the preferred boat accessories and boating equipment for boating enthusiasts and professionals who demand superior performance and reliability.
- USD
12 in. Amber Polyvinyl Keel Roller with Panel Bracket Assembly
86282
Tie Down's Panel Bracket Assemblies is the all-in-one solution boat trailer roller kit for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, trailer roller shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel keel roller bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With an amber color roller measuring 12 inches in size, this keel roller assembly features a 10 inch width between slots and a 12-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD