close
Categories
Filter By
Color
Country of Origin
Division
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 8
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
5.64, 0.55, 75.00, 8.70, 4.11, 21.00, 70.00, 1.01 - Marine
10 items
3/4 in. welded Commercial Grade Male Outside Corner
26418
Our versatile male outside corner allows you to effortlessly create a seamless and secure connection between dock sections. Simply combine it with a female outside corner to achieve an uninterrupted surface that enhances your dock's overall stability and appearance. The joint between the male and female outside corners is reinforced with a 3/4 in. bolt set or connector pin, ensuring a strong and reliable attachment. With legs measuring 10 in. x 5 in., our male outside corner offers superior support and stability for your docks. Its sturdy construction and robust design provide the necessary strength to withstand various loads and environmental factors, ensuring a durable and long-lasting dock system. Our male outside corner is meticulously engineered to meet the highest performance standards. Every detail, from its dimensions to its materials, is carefully crafted to deliver optimal functionality and reliability.
- USD
5/8 in. x 11-1/4 in. Zinc-Plated Roller Shaft
86030
Tie Down's Roller Shaft, a versatile and reliable component for various applications is made with high-quality zinc-plated steel and offers exceptional durability and corrosion resistance. The packaged kit includes the roller shaft itself along with two cap nuts, providing you with everything you need for easy installation. Additionally, the roller shaft is available in two diameters: ½" and ?", allowing you to choose the size that best fits your specific requirements.
- USD
SPARE TIRE CARRIER WITH ELIMINATOR REMOVABLE SPINDLE/HUB
86068
Crafted from heavy-duty steel, Tie Down's Spare Tire Carrier with Eliminator Removable Spindle/Hub is engineered to accommodate both the spare hub/torsion spindle and the spare tire with ease. Its robust construction ensures a dependable solution for carrying essential trailer components wherever your journey takes you. This innovative carrier includes a pre-greased hub with 5 studs, designed to offer unparalleled reliability and performance. With a hot dip galvanized finish, this carrier is built to withstand the elements and provide lasting protection against rust and corrosion. It's designed exclusively for use with Eliminator Torsion Axles, ensuring a perfect fit and seamless compatibility. Featuring a 1,750 lb. hub with 1-1/16 inch and 1-3/8 inch bearings, you can trust that your spare tire and axle components are in capable hands. Whether you're transporting cargo, embarking on outdoor adventures, or hauling equipment, this carrier guarantees that you're always prepared for any eventuality. Designed to fit all trailer frames up to 5 inches high, our spare tire carrier offers versatility without compromising on stability.
- USD
SUPER HOOKER #65, Holding Power 2,400 lbs.
95065
Experience the reliability and affordability of our Super Hooker Anchors. With a traditional fluke style design and durable materials, these anchors offer a robust and economical alternative without sacrificing maximum holding power. Each anchor is hot dip galvanized, ensuring long-lasting protection against corrosion and maintaining its performance in various marine environments. Trust in the proven effectiveness of our Super Hooker Anchors, designed to deliver secure and stable holds. Whether for recreational or professional use, these anchors provide a cost-effective solution that combines reliability and durability.
- USD
5 in. Rubber Keel Roller - Spool 1/2 in. Shaft
86481
Tie Down's Keel Roller is a versatile and essential component for your boat trailer. Available in spool and center-guided variations, the choice depends on the desired look and functionality of your trailer. Tie Down's Keel Roller serves as a replacement part for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
- USD
8 in. Keel Roller with Panel Bracket Assembly
86280
Tie Down's Panel Bracket Assemblies is the all-in-one solution boat trailer roller kit for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, trailer roller shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel keel roller bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With an amber color roller measuring 8 inches in size, this keel roller assembly features a 6 inch width between slots and an 8-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD
DANFORTH ANCHORS STANDARD (S3000), Holding Power 3,000 lbs.
94017
The Danforth® Standard® anchor sets the benchmark for efficiency and holding power in the boating industry. With its exceptional strength-to-weight ratio, this anchor delivers outstanding performance on the water. Manufactured using high-strength steel and hot dip galvanized for long-lasting protection, it ensures durability and reliability in even the harshest marine conditions. Weighing in at 70 lbs., the Danforth® Standard® anchor offers an impressive holding power of 3000 lbs., making it a robust choice for boats ranging from 45 to 55 feet in length.
- USD
SUPER HOOKER #4, Holding Power 240 lbs.
95035
With its traditional fluke design and durable construction, Tie Down's Super Hooker Anchor offers a maximum holding power of 240 lbs. while being lightweight and easy to handle. The hot dip galvanized finish ensures long-lasting protection against corrosion, making it suitable for marine environments. Designed for boats up to 16 feet in length, the Super Hooker Anchor provides peace of mind and secure anchorage for your boating adventures.
- USD
8 in. Black Poly 11 Gauge Galv Steel PANEL BRACKET ASSEMBLIES
86415
Tie Down's Panel Bracket Assemblies is the all-in-one solution for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Choose from a variety of roller materials, including amber or black polyvinyl and black rubber, ensuring a perfect fit for your boat's needs. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With rollers measuring 8 inches in size, these assemblies feature a 6-inch width between slots and an 8-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD