close
Categories
Filter By
Brand
Country of Origin
Division
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 6
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
3.82, 30.64, 0.29, 1.32, 0.20, 1.55 - Marine
10 items
2-3/4 in. x 5 in. Commercial Grade Heavy Duty Cleat Angle
26422
Elevate the strength and stability of your dock system with our heavy-duty angles, specifically designed for reliable cross support. Trust in the durability and resilience of our commercial-grade brackets, engineered to withstand rigorous conditions and deliver long-lasting performance. With our robust angles, you can have peace of mind knowing that your dock is supported by high-quality brackets built to endure heavy-duty applications. Experience enhanced stability and structural integrity for your dock with our reliable angles, ensuring the utmost security and longevity for your docking needs.
- USD
Galvanized Split Panel Brackets, Pair
86140
Introducing Tie Down's Split Panel Bracket, the perfect solution for accommodating any size keel roller and ensuring the stability of your boat on a trailer. These brackets feature slots that allow for easy vertical adjustment, providing a secure fit and added support. Crafted from hot dip galvanized steel, these brackets are built to withstand the elements and offer long-lasting protection. The slots in the brackets are designed to accept 7/16 in. or 1/2 in. bolts, offering versatility and compatibility with different hardware. Choose between roller shaft diameters of 1/2 in. or 5/8 in. for a customized setup. Each package includes a pair of brackets, one for the left side and one for the right side, providing a complete solution for your boat trailer needs.
- USD
4 ft. Black Rubber rollers, Pair
86117
Crafted with a heavy-duty galvanized steel frame, Tie Down's Roller Bunks provide robust and full hull support, ensuring your boat is well-protected during transport and storage. Our roller bunks offer vertical adjustability, allowing you to customize the setup to match your boat's specific requirements. Optional bolster support swivel brackets further enhance flexibility, ensuring a perfect fit for various boat sizes and types. Available in black rubber or amber poly, our Roller Bunks cater to your preferences while delivering the performance you need. Choose from either 4" or 5" sizes, providing options to accommodate different trailer setups and boat weights. Note that the Bunk kits do not include mounting hardware, allowing you to choose the hardware that best suits your trailer and installation preferences.
- USD
4 ft. Heavy Duty Galv Steel ROLLER BUNKS, Amber Poly Rollers
86157
Crafted with a heavy-duty galvanized steel frame, Tie Down's Roller Bunks provide robust and full hull support, ensuring your boat is well-protected during transport and storage. Our roller bunks offer vertical adjustability, allowing you to customize the setup to match your boat's specific requirements. Optional bolster support swivel brackets further enhance flexibility, ensuring a perfect fit for various boat sizes and types. Available in black rubber or amber poly, our Roller Bunks cater to your preferences while delivering the performance you need. Choose from either 4" or 5" sizes, providing options to accommodate different trailer setups and boat weights. Note that the Bunk kits do not include mounting hardware, allowing you to choose the hardware that best suits your trailer and installation preferences.
- USD
5 in. PVC Center Guided Keel Roller with 5/8 in. Shaft
86158
Tie Down Engineering's 5 inch Keel Roller is a versatile and essential component for your boat trailer. This boat trailer roller serves as replacement boat trailer parts for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
- USD
9 in. x 2 in. Side Guide Roller with 1/2 in. Shaft
86475
Tie Down's Slide Guide Roller is the perfect replacement part for fixed angle roller guides (86102) and adjustable roller side guides (86106). Designed to fit seamlessly on top or beneath the guide on's frame, these rollers ensure smooth and reliable boat loading and unloading experiences. Crafted with high-quality rubber, the slide guide roller is rust-resistant and built to withstand the elements for long-lasting durability.
- USD
5 in. Hull Sav'r Black PVC Guided Keel Roller w/ 5/8 in. Shaft
86407
Tie Down's Keel Roller is a versatile and essential component for your boat trailer. Available in spool and center-guided variations, the choice depends on the desired look and functionality of your trailer. Tie Down's Keel Roller serves as a replacement part for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
- USD
2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft
86478
Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
- USD
5 in. Black Rubber 11 Gauge Galv Steel PANEL BRACKET ASSEMBLIES
86430
Tie Down's Panel Bracket Assemblies is the all-in-one solution for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Choose from a variety of roller materials, including amber or black polyvinyl and black rubber, ensuring a perfect fit for your boat's needs. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With rollers measuring 5 inches in size, these assemblies feature a 3-inch width between slots and a 5-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD