close
Categories
Filter By
Brand
Country of Origin
Division
Height (in.)
Length (in.)
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 1
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 13
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
3.82, 0.20, 0.93, 100.00, 2.00, 41.50, 27.56, 1.40 - Marine
18 items
Comercial Grade Piling Hoop Roller Assembly
26415
Tie Down's piling hoop roller assembly combines the piling hoop and dock roller assembly to provide superior protection for your dock. It effectively accommodates the constant up-and-down movement, ensuring smoother operation and minimizing the risk of damage to your dock structure. Designed for dock pilings up to 12 inches in diameter, our piling hoop roller assembly is built to handle challenging environmental conditions. It is ideal for areas with strong winds, heavy currents, or tidal action, providing reliable performance and durability. The assembly helps safeguard your dock from the impact of tidal fluctuations and other external forces, ensuring the long-term integrity of your dock system. Installing the piling hoop roller assembly is a straightforward process. It can be easily mounted to your dock, providing a hassle-free installation experience.
- USD
Plastic Step Fender Brackets for Large Plastic Fenders
44141
Tie Down's Step Fender Brackets are galvanized metal brackets that accommodate large plastic fenders, providing a secure and reliable mounting option. Designed for compatibility with large plastic fenders, these brackets ensure a perfect fit for tires. With their galvanized construction, these brackets are built to withstand the harsh marine environment, offering exceptional durability and corrosion resistance. They provide a sturdy and reliable attachment point for your fenders, ensuring they stay securely in place during transportation and while moored.
- USD
2 in. x 20 ft. Winch Strap with Tail, 1 per pack
50472
These heavy-duty Winch Straps are 2 inches wide, providing excellent strength and durability. With an impressive overall tensile strength of 5,000 lbs, they can easily handle demanding loads. Each strap is equipped with a heavy-duty forged latch hook, ensuring a reliable and secure connection. Whether you're hauling equipment, vehicles, or other valuable items, Tie Down's Winch Straps offer the strength and reliability you need. Each package contains one strap, making it convenient to get the job done.
- USD
PVC Amber 3 in. Bow Roller w/ 1/2 in. Shaft Assembly w/ End Bells
86143
Designed to prevent your boat from scraping against bolts or the roller bracket, Tie Down's Bow Roller Assemblies provide superior boat trailers protection by minimizing potential damage and preserving the integrity of your boat's hull. In addition to protecting your boat, these boat trailer rollers also assist in aligning your boat on the trailer. With their specialized design, these bow boat rollers help center the boat, preventing bow-to-bow stand contact and ensuring proper alignment during loading and unloading. This feature not only makes the process easier but also helps maintain the balance and stability of your boat on the trailer. Built to support the weight of the boat on the trailer, this boat trailer roller assembly is engineered to withstand the load and absorb road shock, providing a secure and stable transportation experience. This ensures that your boat remains secure and protected during transit, even on rough roads or uneven terrain. Acting as a buffer for the boat's bow, these boat trailer rollers provide a soft and cushioned surface that reduces impact and minimizes the risk of damage to both the boat and the boat trailers. This feature adds an extra layer of protection and peace of mind during transportation. With a ½ in. shaft and coming in lengths of 3 in. and 4 in., the bow roller assemblies are all-inclusive, including nuts, two washers, and end bells.
- USD
12 in. 2-3/4 in. BUNK BOARDS BOLSTER Swivel BRACKETS
81221
Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
- USD
5ft. Bunk Board Guide-On, Pair
86124
Tie Down's Bunk Board Guide Ons feature 2x4 black carpeted bunk boards, available in 24" or 60" lengths, ensuring proper boat alignment and protection during loading and unloading. With adjustable posts, you can easily mount them 5-11" on the side of the frame or position them 19" high if mounted above the frame. This flexibility allows you to customize the setup to suit your boat's specific requirements and trailer configuration. Crafted with quality materials, U-bolts and nuts are zinc plated while mounting hardware is galvanized, providing excellent corrosion protection and ensuring lasting durability even in harsh marine environments. The kit is designed to fit frames that are 2-3" wide and up to 4" high, making it a versatile choice for various boat trailers. Sold in pairs with all mounting hardware included, installation is straightforward and hassle-free.
- USD
Hull Sav'r PVC Black 3 in. Bow Roller Assembly with End Bells
86405
Tie Down Engineering's Bow Roller Assembly with End Bells is the ultimate solution for smooth and secure boat loading and unloading on your boat trailers. This all-in-one replacement boat trailer roller assembly includes everything you need to upgrade your bow roller for boat trailer setup. Available in both amber and black colors, as well as 3 inch and 4 inch sizes, our Bow Roller Assembly with End Bells ensures a perfect fit for your specific trailer and boat configuration. Crafted with premium polyvinyl materials, this bow roller kit is highly resistant to salt corrosion and abrasion, guaranteeing long-lasting durability even in harsh marine environments. The integrated end bells provide added protection by preventing your boat from scraping against bolts or roller brackets during the loading and unloading of your boat trailers. They also act as boat guides for trailers, minimizing the risk of bow-to-bow stand contact, and ensuring a secure, snug fit during transportation. Built to withstand the weight of your boat on the trailer and effectively absorb road shocks, Tie Down Engineering's Bow Roller Assembly with End Bells delivers the ultimate support and stability your boat deserves.
- USD
2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft
86478
Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
- USD
5 in. Rubber Keel Roller - Spool 5/8 in. Shaft
86482
Tie Down's Keel Roller is a versatile and essential component for your boat trailer. Available in spool and center-guided variations, the choice depends on the desired look and functionality of your trailer. Tie Down's Keel Roller serves as a replacement part for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
- USD