close
Categories
Filter By
Brand
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 1
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 8
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
3.82, 0.20, 0.93, 0.08, 100.00, 1.70, 3.79 - Marine
11 items
2 in. x 18 in. Standard Grade 7 Gauge Galv Steel Backing Plate
26369
Our Standard Grade 7 Gauge Steel Backing Plate is available in 2-inch and 4-inch widths, making it suitable for a variety of applications. Whether you need to secure equipment, construct structures, or create customized fixtures, our plates provide a reliable and sturdy foundation. Each steel plate features four holes, offering versatile and customizable mounting options to meet your specific needs. This allows for easy installation and ensures a secure and stable connection in various situations. Crafted from high-quality steel, our Standard Grade 7 Gauge Steel Backing Plate is built to last. Its robust construction ensures exceptional strength and durability, providing long-lasting performance and reliability in demanding environments. Each plate undergoes strict quality control measures to ensure that it meets the highest standards of durability, strength, and performance.
- USD
Black Vinyl Jacketed HITCH CABLES, 3500 lbs. capacity
59537
With their durable construction and compliance with industry standards, our hitch cables provide a secure and reliable connection between your trailer and vehicle, giving you peace of mind during your towing adventures. Our hitch cables feature a self-coiling design that prevents tangling and keeps your towing setup neat and organized. Installing our hitch cables includes simply connecting them to your trailer and vehicle hitch. The user-friendly design ensures a quick and straightforward installation process, saving you time and effort. Our hitch cables are coated with a corrosion-resistant finish, protecting them from rust and other environmental elements. This ensures that your cables will maintain their performance and appearance even after prolonged use, providing you with long-lasting reliability. Our hitch cables are suitable for a wide range of towing applications, including trailers, campers, boats, and more. Whether you're towing for recreational or professional purposes, our hitch cables are designed to meet your towing needs with ease.
- USD
"S" HOOK CHAIN KEEPERS, 2-pack
81255
With their patented design, Tie Down's "S" Hook Chain Keepers keepers easily attach to the "S" hooks, providing an added layer of protection and peace of mind. These chain keepers are not only a smart choice for safety-conscious individuals, but they are also required in certain states to meet regulatory standards. Each pack includes two chain keepers, allowing you to conveniently secure multiple chains.
- USD
4 x2x 4-3/8 in. 11 Gauge Steel PANEL BRACKETS
86150
Crafted with durable 11 gauge steel, Tie Down's Panel Brackets are specifically designed for use with keel rollers, ensuring reliable support and protection for your boat during loading and unloading. Featuring slots that accept 7/16 in. or 1/2 in. diameter bolts, our Panel Brackets provide vertical roller adjustment, allowing you to customize the setup to match your boat's specific requirements. Accommodating both 1/2 in. and 5/8 in. sizes and hot dip galvanized for lasting protection, our Panel Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. With a roller size of 4 inches, the width between slots is 2 inches, and the bracket width is 4-? inches, providing a secure and snug fit for your keel rollers.
- USD
2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft
86478
Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
- USD
1000 lbs. - 3500 lbs. Capacity Front Spring Hanger, 1 per pack
86274
Crafted with sturdy solid steel, Tie Down's Spring Hangers offer the strength and durability required to withstand the demands of towing. Our rear hangers are designed for use on slipper springs measuring 1-3/4 inches to 2 inches wide, with a capacity of 5,200 lbs. to 8,000 lbs., making them suitable for medium-duty axles. These hangers are constructed from 1/4-inch stock steel, ensuring robust performance and reliability. Ideal for slipper and double-eye springs mounted on medium-duty axles with a capacity of 1,000 lbs. to 3,500 lbs., our front spring hangers offer dependable support for your trailer's suspension system. Pre-drilled for 9/16-inch bolts, these hangers ensure easy installation and a secure fit. Our spring hangers come in raw unfinished steel, providing a versatile option for customization or finishing to match your trailer's aesthetics. Each pack contains one spring hanger, providing a convenient and cost-effective solution for your trailer's suspension needs.
- USD
PWC Bunk Brackets, Pairs
86564
Tie Down's innovative light-duty bolster PWC Bunk Brackets are specially designed for personal watercraft (PWC) and skiff trailers, providing unmatched convenience and functionality. Crafted from durable 11 gauge steel, these brackets are built to withstand the rigors of marine environments and ensure long-lasting performance. Each pack includes a pair of brackets, featuring a left and right side, making it a complete and practical solution for your trailer setup. The unique design allows for easy and precise bunk angle adjustments, ensuring a perfect fit for your PWC or skiff. This smart feature eliminates the need for a swivel bracket, streamlining your trailer setup and saving you time and effort. These brackets are designed to deliver optimal support and alignment for your PWC, enhancing the overall safety and stability during transport.
- USD
DANFORTH ANCHORS STANDARD (S3500), Holding Power 3,500 lbs.
94018
The Danforth® Standard® anchor sets the benchmark for efficiency and holding power in the boating industry. With its exceptional strength-to-weight ratio, this anchor delivers outstanding performance on the water. Manufactured using high-strength steel and hot dip galvanized for long-lasting protection, it ensures durability and reliability in even the harshest marine conditions. Weighing in at 100 lbs., the Danforth® Standard® anchor offers an impressive holding power of 3500 lbs., making it a robust choice for boats ranging from 55 to 60 feet in length. Its reliable construction and design make it a trusted choice for boaters seeking peace of mind and dependable anchorage.
- USD
5 in. Black Rubber 11 Gauge Galv Steel PANEL BRACKET ASSEMBLIES
86430
Tie Down's Panel Bracket Assemblies is the all-in-one solution for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Choose from a variety of roller materials, including amber or black polyvinyl and black rubber, ensuring a perfect fit for your boat's needs. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With rollers measuring 5 inches in size, these assemblies feature a 3-inch width between slots and a 5-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD