close
Categories
Filter By
Brand
Country of Origin
Division
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 1
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 8
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
21.00, 8.81, 15.00, 1.77, 0.30, 1.06 - Marine
12 items
4-Step Marine-grade Aluminum Dock Ladder, 300 lb. capacity
29274
Tie Down's Marine-grade Aluminum Dock Ladders set offers a high-quality solution for your waterfront needs. Crafted from marine-grade aluminum, these ladders are lightweight yet exceptionally durable, making them perfect for saltwater docks. The aluminum treadplate steps are expertly welded onto the frame, ensuring secure footing and enhanced traction, even in wet conditions. With three size options available - 3-step, 4-step, and 5-step - you can choose the ladder that best suits your specific requirements. With a robust 300 lb. capacity, these ladders are built to withstand heavy use and provide reliable support for users of varying sizes.
- USD
8 in. 4-1/2 in. 11 Gauge Steel BUNK BRACKETS, Bulk
86149
Crafted with 11 gauge steel, Tie Down's Bunk Brackets provide robust support, mounting 2" bunks on edge to ensure reliable boat alignment and protection during transport and storage. The brackets are slotted for vertical adjustment, accommodating both standard and deep-V hulls. Experience the flexibility to customize the setup to match your boat's specific requirements, ensuring a perfect fit every time. Hot dip galvanized for extra protection, our Bunk Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. Available in bulk, each order includes one bracket, providing a cost-effective option for outfitting your boat trailer with the required number of brackets. Each bracket measures 8 inches in size with a 4-½ inch slot length.
- USD
5x 3x 5-3/8 in. 11 Gauge Steel PANEL BRACKETS
86151
Crafted with durable 11 gauge steel, Tie Down's Panel Brackets are specifically designed for use with keel rollers, ensuring reliable support and protection for your boat during loading and unloading. Featuring slots that accept 7/16 in. or 1/2 in. diameter bolts, our Panel Brackets provide vertical roller adjustment, allowing you to customize the setup to match your boat's specific requirements. Accommodating both 1/2 in. and 5/8 in. sizes and hot dip galvanized for lasting protection, our Panel Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. With a roller size of 5 inches, the width between slots is 3 inches, and the bracket width is 5-? inches, providing a secure and snug fit for your keel rollers.
- USD
3-1/4 in. Amber Hull Standard Sav'r Cap End w/ 5/8 in. Shaft
86198
Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the keel roller, offering enhanced boat alignment and stability.
- USD
1/2 in. x 5-1/4 in. Zinc-Plated Roller Shaft, Bulk
86035
Tie Down's Roller Shaft, a versatile and reliable component for various applications is made with high-quality zinc-plated steel and offers exceptional durability and corrosion resistance. The packaged kit includes the roller shaft itself along with two cap nuts, providing you with everything you need for easy installation. Additionally, the roller shaft is available in two diameters: ½" and ?", allowing you to choose the size that best fits your specific requirements.
- USD
"SUV" Plastic Fenders for 14-15 in. wheels, Single
86553
Crafted with precision using Tie Down's innovative injection molding process, these Plastic Fenders boast consistent quality of shape and finish, ensuring a perfect fit and appearance. Constructed from high-quality plastic, these "SUV" style fenders are designed to be corrosion-proof and impact-resistant, making them ideal for withstanding tough marine and road conditions. The modular design of these fenders allows them to easily accommodate 14-15 inch tires and wheels, providing versatility for various trailer setups. With each kit, you'll find all the necessary mounting hardware included, making installation a breeze and saving you time and effort.
- USD
12 in. Hull Sav'r Black PVC End Cap w/ 5/8 in. Shaft
86412
Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
- USD
Heavy Duty Aluminum LICENSE PLATE MOUNTING BRACKET, 1 per pack
86565
A sturdy and reliable solution for securely mounting your license plate on your trailer, Tie Down's License Plate Mounting Bracket is crafted from heavy-duty aluminum tread brite material, ensuring durability and long-lasting performance in various weather conditions. Designed with versatility in mind, the License Plate Mounting Bracket features multiple-hole placement, offering universal mounting options. Whether you have a boat trailer, utility trailer, or any other type of trailer, this bracket can accommodate your license plate with ease. Each pack includes one License Plate Mounting Bracket, making it a convenient and essential trailer accessory.
- USD
8 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk
86130
Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion. Choose from a variety of sizes, including 8 inches, 10 inches, and 12 inches, catering to different trailer configurations and boat weights. Available in 2-packs or bulk quantities, Tie Down provides flexible options to accommodate your needs.
- USD