close
Categories
Filter By
Country of Origin
Division
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 1
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 9
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
2.42, 35.00, 5.74, 2.66, 1.31, 0.65, 4.98 - Marine
10 items
Dock Roller Assembly
26414
Tie Down's commercial-grade dock roller assembly provides flexible installation options to suit your specific docking needs. It can be easily mounted directly to the dock or used with deck plates (parts #26416 and #26447), offering convenience and adaptability. The 5/8-inch stainless steel roller shaft with removable cotter pins ensures sturdy and long-lasting construction. With its 6-inch black rubber roller, the dock roller assembly offers a smooth docking experience. It helps to reduce friction and facilitates easy and gentle boat movement during docking, ensuring a hassle-free docking process.
- USD
Flush Fender Brackets For 17026 and 17033 Plastic Fenders, Pair
81231
Tie Down's Flush Fender Brackets for boat trailers are galvanized metal brackets that accommodate 8 inch to 12 inch plastic fenders, providing a secure and reliable mounting option. Available in both flush-mount and offset-mount styles, these brackets offer versatility to suit your specific needs. Designed for compatibility with small high-impact polyethylene fenders, such as models 17026 and 17033, these brackets ensure a perfect fit for both standard and low-profile tires. With their galvanized construction, these brackets are built to withstand the harsh marine environment, offering exceptional durability and corrosion resistance. They provide a sturdy and reliable attachment point for your fenders, ensuring they stay securely in place during transportation and while moored.
- USD
5 in. PVC Ribbed Wobble Roller Kit, 4-pack
86144
The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. Each kit includes 4 wobble rollers with 4 washers, 8 bushings in two different sizes (4 of each size), and 4 hog rings, making this boat trailer roller kit all inclusive and allowing a hassle-free installation.
- USD
10 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk
86131
Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion. Choose from a variety of sizes, including 8 inches, 10 inches, and 12 inches, catering to different trailer configurations and boat weights. Available in 2-packs or bulk quantities, Tie Down provides flexible options to accommodate your needs.
- USD
1/2 in.-13 1-9/16 in. 4-1/16 in. Zinc Plated Square U-BOLT KITS
86213
Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
- USD
3.5 in. Rubber End Cap 5/8 in. Shaft
86496
Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
- USD
3/8 in.-16 4-1/8 in. 3 in. Galvanized Square U-Bolt Kits
86221
Available in both Zinc-plated and Galvanized options, Tie Down's U-Bolts Kits offer exceptional corrosion resistance, ensuring your trailer remains in top-notch condition. The Zinc-plated U-Bolts come with flat washers and nyloc nuts, providing a secure fit while preventing rusting. On the other hand, the Hot Dip Galvanized coating offers added protection against rust buildup, and the kit includes flat washers, lock washers, and nuts for easy installation. Choose from various rod widths of 7/16 in., ? in., and ½ in., paired with 14, 16, and 13 threads per inch, respectively, ensuring a perfect fit for your specific trailer needs. Whether you need individual U-Bolts or pairs, Tie Down's U-Bolts Kits have got you covered. Select between square or round shape options for seamless integration into your trailer setup.
- USD
DANFORTH HI-TENSILE ANCHORS (35H), Holding Power 3,800 lbs.
94022
Danforth Hi-Tensile Anchors are engineered to deliver maximum holding power and quick deep bottom penetration. Crafted with high-grade 4130 steel, each shank is heat treated for exceptional strength while the hot dip galvanized coating ensures long-lasting protection against corrosion. Weighing just 35 lbs., these anchors offer impressive holding power of 3800 lbs., making them reliable and efficient. Suitable for boat lengths ranging from 50 to 64 ft., the Danforth Hi-Tensile Anchors are the preferred choice for boating enthusiasts and professionals who demand superior performance and reliability.
- USD
Hull Sav'r 5 in. PVC Ribbed Wobble Roller Kit
86419
The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching of their boat trailers, Tie Down Engineering's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, these boat rollers for trailer are particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the boat trailer roller is a replacement part and requires the trailer to come with the assembly already installed. Each kit includes 4 wobble rollers with 4 washers, 8 bushings in two different sizes (4 of each size), and 4 hog rings, making this boat trailer roller kit all inclusive and allowing a hassle-free installation.
- USD