close
Categories
Filter By
Brand
Country of Origin
Division
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 1
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 10
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
2.00, 6.16, 5.68, 9.50, 37.36 - Marine
12 items
Commercial Grade Heavy Duty INSIDE CORNER 8-1/4 in. x 5 in. with 2-1/4 in. elongated holes Part ID: 26403
26403
The Commercial Grade Inside Corner End is designed to seamlessly connect with one of our outside corners, creating a secure and reliable connection for your marine structures. Built to withstand the demanding conditions of marine environments, this inside corner end is crafted with galvanized steel in both commercial and standard grade. The inside corner end is suitable for a variety of marine applications. Whether you are constructing docks, swim platforms, or other marine structures, this component provides a dependable solution to create strong and stable inside corners.
- USD
Plastic Step Fender Brackets for Large Plastic Fenders
44141
Tie Down's Step Fender Brackets are galvanized metal brackets that accommodate large plastic fenders, providing a secure and reliable mounting option. Designed for compatibility with large plastic fenders, these brackets ensure a perfect fit for tires. With their galvanized construction, these brackets are built to withstand the harsh marine environment, offering exceptional durability and corrosion resistance. They provide a sturdy and reliable attachment point for your fenders, ensuring they stay securely in place during transportation and while moored.
- USD
5 ft. Amber Poly Roller Bunks
86145
Crafted with a heavy-duty galvanized steel frame, Tie Down's Roller Bunks provide robust and full hull support, ensuring your boat is well-protected during transport and storage. Our roller bunks offer vertical adjustability, allowing you to customize the setup to match your boat's specific requirements. Optional bolster support swivel brackets further enhance flexibility, ensuring a perfect fit for various boat sizes and types. Available in black rubber or amber poly, our Roller Bunks cater to your preferences while delivering the performance you need. Choose from either 4" or 5" sizes, providing options to accommodate different trailer setups and boat weights. Note that the Bunk kits do not include mounting hardware, allowing you to choose the hardware that best suits your trailer and installation preferences.
- USD
5 ft. Black Rubber rollers, Pair
86118
Crafted with a heavy-duty galvanized steel frame, Tie Down's Roller Bunks provide robust and full hull support, ensuring your boat is well-protected during transport and storage. Our roller bunks offer vertical adjustability, allowing you to customize the setup to match your boat's specific requirements. Optional bolster support swivel brackets further enhance flexibility, ensuring a perfect fit for various boat sizes and types. Available in black rubber or amber poly, our Roller Bunks cater to your preferences while delivering the performance you need. Choose from either 4" or 5" sizes, providing options to accommodate different trailer setups and boat weights. Note that the Bunk kits do not include mounting hardware, allowing you to choose the hardware that best suits your trailer and installation preferences.
- USD
12 in. 2-3/4 in. BUNK BOARDS BOLSTER Swivel BRACKETS
81221
Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
- USD
Black Plastic Fender for 8 in. - 12 in. Tires
86751
This Black Plastic Fender is constructed with high-quality polyethylene, ensuring it can withstand high impact and resist damage, guaranteeing long-lasting durability in challenging conditions. With a versatile design, these fenders for trailers are suitable for various trailer setups and accommodate 8 to 12 inch wheels. Installing these trailer fenders is hassle-free thanks to their "no load" capacity, allowing for easy installation on your trailer.
- USD
9 in. x 16 in. Adjustable Tandem Teardrop Fender
86269
Crafted with .080 Aluminum Treadbrite, Tie Down's Adjustable Fender ensures exceptional stability and durability to safeguard your trailer from road debris and elements. The standout feature of our Adjustable Fender is its flexibility in size. Featuring a teardrop design, this fender can accommodate almost all dual-axle trailer sizes and configurations with its ability to adjust between 60-72 inches in length, providing a perfect fit for your specific needs. Measuring 9 inches in width and 16 inches in height, our Adjustable Fender offers ample coverage to protect your trailer wheels and tires. Our Adjustable Fender kit is boxed and easily shipped, ensuring a hassle-free delivery process.
- USD
10 in. Amber Polyvinyl Keel Roller with Panel Bracket Assembly
86281
Tie Down's Panel Bracket Assemblies is the all-in-one solution boat trailer roller kit for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, trailer roller shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel keel roller bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With an amber color roller measuring 10 inches in size, this keel roller assembly features a 8 inch width between slots and an 10-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD
10 in. Black Poly 11 Gauge Steel Galv PANEL BRACKET ASSEMBLIES
86416
Tie Down's Panel Bracket Assemblies is the all-in-one solution for sturdy and reliable keel roller support. Each bracket is a one-piece assembly that includes a keel roller, shaft, and cap nuts, offering convenience and efficiency for your trailer setup. Choose from a variety of roller materials, including amber or black polyvinyl and black rubber, ensuring a perfect fit for your boat's needs. Crafted from robust 11-gauge steel, these panel bracket assemblies are hot dip galvanized for extra protection, providing exceptional corrosion resistance and durability, even in harsh marine environments. Specifically designed to work seamlessly with keel rollers, our panel bracket assemblies offer secure and reliable support for your boat's keel during loading and unloading. With rollers measuring 10 inches in size, these assemblies feature an 8-inch width between slots and a 10-? inch bracket width, ensuring ample support and proper alignment for your boat's hull.
- USD