close
Categories
Filter By
Country of Origin
Division
Prop 65 Chemical
Prop 65 Warning Copy
- WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 2
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov 7
Warranty
Weight (lbs.)
- 0.07 1
- 0.08 1
- 0.09 2
- 0.10 1
- 0.11 1
- 0.12 1
- 0.20 1
- 0.22 1
- 0.26 2
- 0.27 1
- 0.28 3
- 0.29 1
- 0.30 4
- 0.31 1
- 0.33 1
- 0.34 5
- 0.35 3
- 0.37 1
- 0.39 1
- 0.40 3
- 0.41 2
- 0.43 1
- 0.44 1
- 0.45 2
- 0.46 2
- 0.47 4
- 0.48 5
- 0.50 3
- 0.51 1
- 0.52 4
- 0.54 2
- 0.55 2
- 0.57 8
- 0.58 1
- 0.59 2
- 0.60 3
- 0.63 1
- 0.64 1
- 0.65 3
- 0.68 1
- 0.70 1
- 0.71 2
- 0.72 1
- 0.73 2
- 0.75 1
- 0.76 1
- 0.77 1
- 0.78 3
- 0.80 2
- 0.82 1
- 0.83 1
- 0.84 4
- 0.85 2
- 0.86 3
- 0.88 1
- 0.89 1
- 0.90 1
- 0.93 1
- 0.94 2
- 0.95 1
- 1.00 1
- 1.01 1
- 1.04 1
- 1.06 2
- 1.11 1
- 1.13 1
- 1.14 1
- 1.20 3
- 1.22 3
- 1.23 2
- 1.25 3
- 1.26 1
- 1.27 1
- 1.28 1
- 1.30 1
- 1.31 1
- 1.32 2
- 1.34 1
- 1.37 1
- 1.38 2
- 1.40 5
- 1.44 1
- 1.46 1
- 1.50 1
- 1.52 1
- 1.53 1
- 1.55 3
- 1.61 1
- 1.62 1
- 1.63 1
- 1.64 1
- 1.69 1
- 1.70 4
- 1.72 1
- 1.74 2
- 1.75 1
- 1.77 1
- 1.80 4
- 1.81 1
- 1.82 1
- 1.86 1
- 1.90 2
- 1.92 1
- 10.05 1
- 10.14 1
- 100.00 1
- 11.60 2
- 11.90 2
- 12.00 2
- 12.28 1
- 12.54 1
- 12.62 1
- 12.87 1
- 13.50 1
- 13.66 1
- 14.00 2
- 14.76 1
- 15.00 3
- 15.15 1
- 15.50 1
- 15.80 1
- 150.00 1
- 16.00 1
- 16.80 1
- 17.25 1
- 17.44 1
- 17.80 1
- 18.00 6
- 18.24 1
- 18.30 1
- 18.93 1
- 19.00 1
- 19.20 2
- 19.50 2
- 190.00 1
- 2.00 6
- 2.05 1
- 2.12 2
- 2.19 1
- 2.25 1
- 2.28 3
- 2.29 1
- 2.30 2
- 2.35 1
- 2.40 2
- 2.42 1
- 2.44 1
- 2.45 1
- 2.46 1
- 2.50 4
- 2.55 1
- 2.60 3
- 2.64 1
- 2.66 1
- 2.70 1
- 2.85 1
- 2.87 1
- 2.98 1
- 20.00 1
- 20.02 2
- 20.34 2
- 20.82 1
- 20.95 1
- 21.00 1
- 21.20 1
- 21.82 1
- 22.68 1
- 23.50 2
- 23.70 1
- 24.00 1
- 24.02 1
- 25.00 3
- 25.50 1
- 27.56 1
- 27.75 2
- 28.00 1
- 28.88 1
- 29.75 1
- 3.00 1
- 3.02 1
- 3.08 2
- 3.12 2
- 3.14 1
- 3.20 1
- 3.35 1
- 3.37 1
- 3.42 1
- 3.44 4
- 3.45 1
- 3.50 5
- 3.54 1
- 3.55 1
- 3.59 2
- 3.64 1
- 3.66 1
- 3.69 1
- 3.73 1
- 3.79 2
- 3.82 1
- 3.88 1
- 30.64 2
- 31.08 1
- 35.00 1
- 36.00 2
- 37.36 2
- 37.42 1
- 4.00 1
- 4.10 1
- 4.11 1
- 4.14 1
- 4.15 2
- 4.24 1
- 4.25 1
- 4.27 1
- 4.30 1
- 4.42 1
- 4.50 2
- 4.76 1
- 4.98 1
- 40.53 1
- 41.50 2
- 42.00 1
- 43.00 1
- 44.45 1
- 46.41 1
- 5.00 3
- 5.11 1
- 5.34 1
- 5.45 1
- 5.54 1
- 5.61 1
- 5.64 2
- 5.68 1
- 5.74 2
- 5.86 1
- 5.97 1
- 52.00 1
- 6.00 2
- 6.12 1
- 6.14 1
- 6.16 2
- 6.26 1
- 6.36 2
- 6.40 2
- 6.50 3
- 6.60 1
- 6.67 1
- 6.68 1
- 6.72 1
- 6.76 1
- 6.80 1
- 60.00 1
- 7.00 1
- 7.20 2
- 7.62 1
- 7.72 1
- 7.81 1
- 7.82 1
- 7.86 1
- 70.00 1
- 75.00 1
- 8.00 2
- 8.33 1
- 8.48 2
- 8.50 2
- 8.53 1
- 8.66 1
- 8.68 1
- 8.70 1
- 8.75 1
- 8.81 1
- 8.98 1
- 86323.00 1
- 9.00 3
- 9.30 1
- 9.50 1
- 90.00 1
- 96.00 1
100.00, 16.00, 1.01, 2.29, 1.32, 3.08, 1.31 - Marine
9 items
3.5 in. Commercial Grade OC Male T Connector
26427
Enhance the security and stability of your dock system with our robust male T connector, designed to provide a reliable attachment point for fingers and ramps. Create a seamless and secure connection by combining our male T connector with the female T connector, ensuring a solid and stable connection between dock components. Crafted with a welded 1/2 in. tab, our male T connector offers exceptional strength and durability, providing long-lasting support for your dock system. With a measurement of 5 in. x 5 in., our male T connector provides ample support and stability, ensuring the structural integrity of your dock. Installation is quick and hassle-free with a 3/4 in. bolt set, providing a secure joint for a robust connection between dock components.
- USD
9-1/2 in. x 6 in. 11 Gauge Steel Bunk Brackets, Pair
81225
Designed to securely mount 2" bunks along the edge, Tie Down’s Bunk Brackets are constructed with sturdy 11-gauge steel, ensuring durability and reliability for your trailer setup. With a slotted design, they offer vertical adjustment to accommodate both standard and deep-V hulls, providing versatility and ease of installation. The bunk brackets are hot dip galvanized for enhanced protection against corrosion and harsh marine conditions, ensuring long-lasting performance. Available in bulk with one bracket per package, these brackets are the perfect addition to your boat trailer accessories. Measuring 9-1/2" in size with a 6" slot length, they offer a precise fit for your bunks. The silver color adds a sleek and professional touch to your trailer setup, complementing your boat's aesthetics.
- USD
5/8 in. x 11-1/4 in. Zinc-Plated Roller Shaft
86030
Tie Down's Roller Shaft, a versatile and reliable component for various applications is made with high-quality zinc-plated steel and offers exceptional durability and corrosion resistance. The packaged kit includes the roller shaft itself along with two cap nuts, providing you with everything you need for easy installation. Additionally, the roller shaft is available in two diameters: ½" and ?", allowing you to choose the size that best fits your specific requirements.
- USD
10 x 8 x 10-3/8 in. 11 Gauge Steel PANEL BRACKETS
86155
Crafted with durable 11 gauge steel, Tie Down's Panel Brackets are specifically designed for use with keel rollers, ensuring reliable support and protection for your boat during loading and unloading. Featuring slots that accept 7/16 in. or 1/2 in. diameter bolts, our Panel Brackets provide vertical roller adjustment, allowing you to customize the setup to match your boat's specific requirements. Accommodating both 1/2 in. and 5/8 in. sizes and hot dip galvanized for lasting protection, our Panel Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. With a roller size of 10 inches, the width between slots is 8 inches, and the bracket width is 10-? inches, providing a secure and snug fit for your keel rollers.
- USD
5 in. PVC Center Guided Keel Roller with 5/8 in. Shaft
86158
Tie Down Engineering's 5 inch Keel Roller is a versatile and essential component for your boat trailer. This boat trailer roller serves as replacement boat trailer parts for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
- USD
10 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk
86131
Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion. Choose from a variety of sizes, including 8 inches, 10 inches, and 12 inches, catering to different trailer configurations and boat weights. Available in 2-packs or bulk quantities, Tie Down provides flexible options to accommodate your needs.
- USD
5 in. Hull Sav'r Black PVC Guided Keel Roller w/ 5/8 in. Shaft
86407
Tie Down's Keel Roller is a versatile and essential component for your boat trailer. Available in spool and center-guided variations, the choice depends on the desired look and functionality of your trailer. Tie Down's Keel Roller serves as a replacement part for any warped or distorted rollers. The primary function of the keel roller is to center and guide the keel of your boat onto the trailer during loading and unloading. By providing a smooth and controlled surface, it helps prevent the boat from shifting side to side and ensures proper alignment, simplifying the launching and retrieval process. Using multiple keel rollers at once offers even greater benefits. With several rollers strategically positioned along the trailer's cross members or axles, you can distribute the load and support the boat more effectively. This helps prevent the boat from cross members or axle contact, minimizing potential damage and wear. Constructed with durability in mind, the keel roller is designed to withstand abrasion and resist salt corrosion, making it suitable for both freshwater and saltwater environments. This ensures long-lasting performance and reliable functionality, even in harsh marine conditions.
- USD
S1300 Danforth Standard Anchor
94014
Experience unmatched efficiency and exceptional holding power with the S1300 Danforth Standard Anchor. This industry-leading boat anchor is designed to provide maximum reliability while being lightweight and versatile. Crafted with high-strength steel and hot-dip galvanized for long-lasting protection, this fluke anchor offers superior durability in challenging marine environments. With a maximum holding power of 1,300 lbs. and weighing only 16 lbs., this boat anchor is suitable for boats ranging from 31-36 feet in length. This Danforth Anchor is trusted by boating enthusiasts and professionals to be their boat anchor of choice for their pontoon boat accessories, bass boat accessories, sand anchor, jetski anchor, beach anchor, and many other marine accessories.
- USD
DANFORTH ANCHORS STANDARD (S3500), Holding Power 3,500 lbs.
94018
The Danforth® Standard® anchor sets the benchmark for efficiency and holding power in the boating industry. With its exceptional strength-to-weight ratio, this anchor delivers outstanding performance on the water. Manufactured using high-strength steel and hot dip galvanized for long-lasting protection, it ensures durability and reliability in even the harshest marine conditions. Weighing in at 100 lbs., the Danforth® Standard® anchor offers an impressive holding power of 3500 lbs., making it a robust choice for boats ranging from 55 to 60 feet in length. Its reliable construction and design make it a trusted choice for boaters seeking peace of mind and dependable anchorage.
- USD
1 - 9 of 9
1