Filter Sort
close
Filter By
Country of Origin
Division
Gross Weight (lbs.)
Prop 65 Chemical
Weight (lbs.)
1 - 9 of 10
Amber 4 in. Bow Roller Assembly with End Bells, 1/2 in. Shaft

Amber 4 in. Bow Roller Assembly with End Bells, 1/2 in. Shaft

86142

Designed to prevent your boat from scraping against bolts or the roller bracket, Tie Down's Bow Rollers provide superior boat protection by minimizing potential damage and preserving the integrity of your boat's hull. In addition to protecting your boat, these bow rollers also assist in aligning your boat on the trailer. With their specialized design, they help center the boat, preventing bow-to-bow stand contact and ensuring proper alignment during loading and unloading. This feature not only makes the process easier but also helps maintain the balance and stability of your boat on the trailer. Built to support the weight of the boat on the trailer, they are engineered to withstand the load and absorb road shock, providing a secure and stable transportation experience. This ensures that your boat remains secure and protected during transit, even on rough roads or uneven terrain. Acting as a buffer for the boat's bow, they provide a soft and cushioned surface that reduces impact and minimizes the risk of damage to both the boat and the trailer. This feature adds an extra layer of protection and peace of mind during transportation. With a ½ in. shaft and coming in lengths of 3 in. and 4 in., the bow roller assemblies are all-inclusive, including nuts, two washers, and end bells.
View Details
5x 3x 5-3/8 in. 11 Gauge Steel PANEL BRACKETS

5x 3x 5-3/8 in. 11 Gauge Steel PANEL BRACKETS

86151

Crafted with durable 11 gauge steel, Tie Down's Panel Brackets are specifically designed for use with keel rollers, ensuring reliable support and protection for your boat during loading and unloading. Featuring slots that accept 7/16 in. or 1/2 in. diameter bolts, our Panel Brackets provide vertical roller adjustment, allowing you to customize the setup to match your boat's specific requirements. Accommodating both 1/2 in. and 5/8 in. sizes and hot dip galvanized for lasting protection, our Panel Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. With a roller size of 5 inches, the width between slots is 3 inches, and the bracket width is 5-? inches, providing a secure and snug fit for your keel rollers.
View Details
12-5/8 in. 9-1/8 in. 11 Gauge Steel Brackets BUNK BRACKETS, Bulk

12-5/8 in. 9-1/8 in. 11 Gauge Steel Brackets BUNK BRACKETS, Bulk

86126

Crafted with 11 gauge steel, Tie Down's Bunk Brackets provide robust support, mounting 2" bunks on edge to ensure reliable boat alignment and protection during transport and storage. The brackets are slotted for vertical adjustment, accommodating both standard and deep-V hulls. Experience the flexibility to customize the setup to match your boat's specific requirements, ensuring a perfect fit every time. Hot dip galvanized for extra protection, our Bunk Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. Available in bulk, each order includes one bracket, providing a cost-effective option for outfitting your boat trailer with the required number of brackets. Each bracket measures 12-? inches in size with a 9-? inch slot length.
View Details
9 in. x 16 in. Adjustable Tandem Regular Fender

9 in. x 16 in. Adjustable Tandem Regular Fender

86268

Crafted with .080 Aluminum Treadbrite, Tie Down's Adjustable Fender ensures exceptional stability and durability to safeguard your trailer from road debris and elements. The standout feature of our Adjustable Fender is its flexibility in size. With the ability to adjust between 60-72 inches in length, this fender can accommodate almost all dual-axle trailer sizes and configurations, providing a perfect fit for your specific needs. Measuring 9 inches in width and 16 inches in height, our Adjustable Fender offers ample coverage to protect your trailer wheels and tires. Our Adjustable Fender kit is boxed and easily shipped, ensuring a hassle-free delivery process.
View Details
5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack

5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack

86275

Crafted with sturdy solid steel, Tie Down's Spring Hangers offer the strength and durability required to withstand the demands of towing. Our rear hangers are designed for use on slipper springs measuring 1-3/4 inches to 2 inches wide, with a capacity of 5,200 lbs. to 8,000 lbs., making them suitable for medium-duty axles. These hangers are constructed from 1/4-inch stock steel, ensuring robust performance and reliability. Ideal for slipper and double-eye springs mounted on medium-duty axles with a capacity of 1,000 lbs. to 3,500 lbs., our front spring hangers offer dependable support for your trailer's suspension system. Pre-drilled for 9/16-inch bolts, these hangers ensure easy installation and a secure fit. Our spring hangers come in raw unfinished steel, providing a versatile option for customization or finishing to match your trailer's aesthetics. Each pack contains one spring hanger, providing a convenient and cost-effective solution for your trailer's suspension needs.
View Details
S600 Danforth Standard Anchor

S600 Danforth Standard Anchor

94012

Experience unmatched efficiency and exceptional holding power with the S600 Danforth Standard Anchor. This industry-leading boat anchor is designed to provide maximum reliability while being lightweight and versatile. Crafted with high-strength steel and hot-dip galvanized for long-lasting protection, this fluke anchor offers superior durability in challenging marine environments. With a maximum holding power of 600 lbs. and weighing only 9 lbs., this boat anchor is suitable for boats ranging from 17-27 feet in length. This Danforth Anchor is trusted by boating enthusiasts and professionals to be their boat anchor of choice for their pontoon boat accessories, bass boat accessories, sand anchor, jetski anchor, beach anchor, and many other marine accessories.
View Details
Super Hooker Anchor, Holding Power 480 lbs.

Super Hooker Anchor, Holding Power 480 lbs.

95040

With its traditional fluke design and durable construction, Tie Down's Super Hooker Anchor offers a maximum holding power of 480 lbs. while being lightweight and easy to handle. The hot dip galvanized finish ensures long-lasting protection against corrosion, making it suitable for marine environments. Designed for boats up to 24 feet in length, the Super Hooker Anchor provides peace of mind and secure anchorage for your boating adventures.
View Details
4 in. Black Hull Sav'r PVC Roller Assembly w/ End Bells

4 in. Black Hull Sav'r PVC Roller Assembly w/ End Bells

86404

Tie Down's Bow Roller Assembly with End Bells is the ultimate solution for smooth and secure boat loading and unloading on your trailer. This all-in-one replacement part assembly includes everything you need to upgrade your bow roller setup. Available in both amber and black colors, as well as 3" and 4" sizes, our Bow Roller Assembly with End Bells ensures a perfect fit for your specific trailer and boat configuration. Crafted with premium polyvinyl materials, this assembly is highly resistant to salt corrosion and abrasion, guaranteeing long-lasting durability, even in harsh marine environments. The integrated end bells provide added protection by preventing your boat from scraping against bolts or roller brackets during loading and unloading. They also help center your boat on the trailer, minimizing the risk of bow-to-bowstand contact, and ensuring a secure, snug fit during transportation. Built to withstand the weight of your boat on the trailer and effectively absorb road shocks, Tie Down's Bow Roller Assembly with End Bells delivers the ultimate support and stability your boat deserves.
View Details
8 in. 2-3/4 in. BUNK BOARDS BOLSTER BRACKETS, 2 pack

8 in. 2-3/4 in. BUNK BOARDS BOLSTER BRACKETS, 2 pack

81195

Tie Down's Bunk Boards Bolster Brackets offer exceptional functionality and durability. The slotted design allows for vertical adjustment, ensuring a perfect fit and maximizing load capacity. The non-slip dimples provide added stability, preventing movement and enhancing the overall load-carrying capability. For lasting protection against corrosion and wear, these bolster brackets are hot dip galvanized, ensuring long-lasting performance even in harsh environments. The packaging options include pairs of brackets with swivel brackets, bolts, and nyloc nuts for convenient installation. Additionally, these brackets are also available in bulk (one bracket only), providing flexibility for your specific needs.
View Details
1 - 9 of 10