Filter Sort
close
Filter By
Brand
Country of Origin
Division
Gross Weight (lbs.)
Warranty
1 - 9 of 9
2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft

2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft

86478

Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
View Details
Galvanized 5-step Dock Ladders

Galvanized 5-step Dock Ladders

28275

Tie Down Engineering's Dock Ladders combine functionality with style and are available in two attractive finishes, including a vibrant blue powder coat and a sleek galvanized silver finish. With three size options - 3-step, 4-step, and 5-step - you can choose the ladder that best suits your needs. Each step of the ladder is meticulously crafted with a galvanized or powder-coated finish, providing an extra layer of protection against wear and tear. The galvanized version is specifically designed to withstand the corrosive effects of saltwater, ensuring long-lasting durability in marine environments. Safety is our top priority, which is why the Dock Ladder set has a robust 300 lb. weight capacity, offering stability and support for users of various sizes. Whether you're a boat owner, a waterfront property owner, or a marina operator, this ladder set is designed to meet your needs and exceed your expectations.
View Details
4 in. Black Hull Sav'r PVC Ribbed Wobble Roller w/ 1-1/8 in Shaft

4 in. Black Hull Sav'r PVC Ribbed Wobble Roller w/ 1-1/8 in Shaft

86427

The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. With its ability to assist in loading the boat while preventing scratches and damage, the Tie Down Ribbed Wobble Roller is a must-have accessory for boating enthusiasts.
View Details
90 Degree 48 in. Post w/LED Lights PVC POST GUIDE ON, Pair

90 Degree 48 in. Post w/LED Lights PVC POST GUIDE ON, Pair

86346

Tie Down’s PVC guide on posts feature bright orange end caps, providing clear visual markers to ensure you navigate your boat with confidence. Available in 48" and 60" lengths as well as a slant 90-degree and 13-degree angle, these guide posts offer versatility to accommodate various boat and trailer combinations. Tie Down's PVC Post Guide On with a 90-Degree Slant is used for narrower trailers and boats, making the process hassle-free and stress-free. Crafted with non-marking PVC pipe, these guide posts are braced with metal tubing 15 inches into the pipe, ensuring unparalleled strength and impact resistance. Additionally, some posts come equipped with LED lights for added visibility, enhancing safety during low-light conditions. All hardware, including bolts and nuts, is zinc plated while mounting brackets are galvanized, providing lasting protection against corrosion. Sold in pairs, our PVC Post Guide On exemplifies Tie Down's commitment to delivering top-notch products that enhance your boating experience.
View Details
PVC POST GUIDE ON 13 Degree Slant, 48 in. Post w/LED Lights

PVC POST GUIDE ON 13 Degree Slant, 48 in. Post w/LED Lights

86441

Tie Down’s PVC guide on posts feature bright orange end caps, providing clear visual markers to ensure you navigate your boat with confidence. Available in 48" and 60" lengths as well as a slant 90-degree and 13-degree angle, these guide posts offer versatility to accommodate various boat and trailer combinations. Tie Down's PVC Post Guide On with 13 Degree Slant provides a wider target for easier boat loading, making the process hassle-free and stress-free. Crafted with non-marking PVC pipe, these guide posts are braced with metal tubing 15 inches into the pipe, ensuring unparalleled strength and impact resistance. Additionally, some posts come equipped with LED lights for added visibility, enhancing safety during low-light conditions. All hardware, including bolts and nuts, is zinc plated while mounting brackets are galvanized, providing lasting protection against corrosion. Sold in pairs, our PVC Post Guide On exemplifies Tie Down's commitment to delivering top-notch products that enhance your boating experience.
View Details
12 in. 2-3/4 in. Galv BOLSTER BRACKETS, Bulk

12 in. 2-3/4 in. Galv BOLSTER BRACKETS, Bulk

86132

Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion. Choose from a variety of sizes, including 8 inches, 10 inches, and 12 inches, catering to different trailer configurations and boat weights. Available in 2-packs or bulk quantities, Tie Down provides flexible options to accommodate your needs.
View Details
5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack

5,200 lbs. - 8,000 lbs. Capacity Rear Spring Hanger, 1 per pack

86275

Crafted with sturdy solid steel, Tie Down's Spring Hangers offer the strength and durability required to withstand the demands of towing. Our rear hangers are designed for use on slipper springs measuring 1-3/4 inches to 2 inches wide, with a capacity of 5,200 lbs. to 8,000 lbs., making them suitable for medium-duty axles. These hangers are constructed from 1/4-inch stock steel, ensuring robust performance and reliability. Ideal for slipper and double-eye springs mounted on medium-duty axles with a capacity of 1,000 lbs. to 3,500 lbs., our front spring hangers offer dependable support for your trailer's suspension system. Pre-drilled for 9/16-inch bolts, these hangers ensure easy installation and a secure fit. Our spring hangers come in raw unfinished steel, providing a versatile option for customization or finishing to match your trailer's aesthetics. Each pack contains one spring hanger, providing a convenient and cost-effective solution for your trailer's suspension needs.
View Details
4 in. Amber PVC Ribbed Wobble Roller with 1-1/8 in. Shaft

4 in. Amber PVC Ribbed Wobble Roller with 1-1/8 in. Shaft

86277

The perfect solution for boaters seeking enhanced traction and shock absorption during launching, loading, and hitching, Tie Down's Ribbed Wobble Roller’s ribbed design provides extra grip for slick hulls, ensuring a secure and stable boat-loading experience. Designed as an ideal alternative to trailer bunks, the ribbed wobble roller is particularly beneficial when launching on shallow ramps or in shallow waters. It is important to note that the roller is a replacement part and requires the trailer to come with the assembly already installed. With its ability to assist in loading the boat while preventing scratches and damage, the Tie Down Ribbed Wobble Roller is a must-have accessory for boating enthusiasts.
View Details
FENDER TDM RSV 9X72X20 CR 16G NH

FENDER TDM RSV 9X72X20 CR 16G NH

86581

View Details
1 - 9 of 9
1