close
Filter By
Brand
Color
Division
Warranty
Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.18 1
- 0.25 1
- 0.30 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.25 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.50 1
- 12.00 3
- 12.80 1
- 13.25 1
- 18.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.50 2
- 2.53 1
- 2.78 1
- 2.80 2
- 3.00 1
- 3.10 2
- 3.15 1
- 3.50 3
- 3.70 1
- 3.75 1
- 3.80 1
- 4.00 2
- 4.01 1
- 4.02 1
- 4.44 1
- 4.50 3
- 4.60 2
- 4.80 1
- 5.00 2
- 5.12 1
- 5.13 2
- 5.50 1
- 5.60 1
- 5.67 1
- 5.92 1
- 56.00 1
- 6.00 1
- 6.10 1
- 6.25 1
- 6.50 7
- 6.94 1
- 7.00 4
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.20 2
- 8.67 1
- 9.00 2
- 9.50 2
- 9.67 1
- 90.00 1
- 95.00 1
4.02, 1.75, 5.60, 1.67, 0.50, 3.50, 4.60 - Manufactured Housing
12 items
Galvanized Quik-Set Stabilization Plate
59291G
Tie Down’s innovative Quik-Set Stabilization Plate, available in a galvanized finish, is designed to be driven into the ground simultaneously with the anchor, slipping smoothly beneath the anchor head. Crafted for convenience, the Quik-Set Stabilization Plate offers a Quick-N-Easy installation. Its inclined steady rest is engineered to accommodate ground anchor installation at a slight back angle of 10-15 degrees, contributing to the swift and stable placement of both the anchor and the plate. The galvanized finish offers superior corrosion resistance and longevity, ensuring ease of use and exceptional durability in harsh environmental conditions.
- USD
12 in. wide Galvanized Earth Anchor Stabilizer
59292G
Tie Down’s Earth Anchor Stabilizer, with a 12-inch width, effectively prevents the anchor from slicing through the soil laterally, ensuring a secure hold in the direction of the frame tie. This galvanized version offers superior corrosion resistance and long-lasting performance, making it ideal for harsh environmental conditions and ensuring exceptional durability.
- USD
30 in. Coral Anchor
59096
The Coral Anchor is your solution for anchoring in coral formations. The Coral Anchor is built to be driven with ease – the 30 in. rod effortlessly penetrates the coral with the assistance of an impact hammer. The anchor's barbs ensure steadfast embedment, providing unparalleled stability and reliability. Designed for use at a 60-degree angle (30 degrees from vertical) into the coral. Not for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
3 in. Beam Clamps
59003
Designed to effortlessly clamp over the main beam, Tie Down's Beam Clamps provide an ideal attachment point for your various strapping needs. Available in versatile sizes of 3 inches, 4 inches, and 8 inches (DBL) for double beam applications, these clamps offer a wide range of options to suit your project requirements. Tie Down's Beam Clamps are engineered to enhance your connection solutions with optimal flexibility. Crafted from high-quality steel, these clamps are built to last, delivering enduring performance even in demanding environments. Experience hassle-free installation that saves you valuable time and effort. With a straightforward design, these clamps ensure a quick and efficient setup process. Tie Down's commitment to quality and customer satisfaction is reflected in the included 1-year warranty, providing you with peace of mind as you put these clamps to work.
- USD
ANGLE FRAME BRACKET
59009
Crafted from high-quality steel, Tie Down's Angle Frame Bracket serves as a pivotal connection point, ensuring a robust foundation for your structures. Designed for the attachment of longitudinal anchors to I-beams at both ends of the home, the Angle Frame Bracket is a fundamental component for anchoring security. With a 1-year warranty, Tie Down's commitment to quality is evident in the durable construction of the Angle Frame Bracket. Prioritize safety and stability by strategically determining anchor and stabilizer plate locations, along with bracket placement on the I-beam. Ensuring a strap angle of 60 degrees or lower optimizes the effectiveness of your anchoring solution. The installation process is straightforward: Drill a ½-inch hole centered in the I-beam, at least 4 inches from the edge. For wind zones II and III, connect two frame brackets with a ½-inch grade 5 bolt and nut; for wind zone I, one frame bracket is sufficient. Attach the swivel connector and strap to the angle frame brackets using ½-inch grade 5 bolts and nuts, then tighten securely.
- USD
37 ft. G60 Galvanized Strap
59155
Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
- USD
8 ft. G-120 Strap with Swivel Connectors, 50 per box
59213
Tie Down's Universal Swivel Strap Connector empowers you to achieve secure bolted swivel or slotted clip attachments by seamlessly connecting straps to beam clamps and uplift brackets. Crafted for excellence, these connectors are made with G-120 strap material, ensuring exceptional strength and durability. Offering a comprehensive range of installation options, you have the flexibility to choose between swivel strap and I-beam bracket connections, sidewall slotted configurations, sidewall setups with nut and bolt fasteners, and longitudinal I-beam installations. Engineered to meet the demands of wind zones 2 and 3, Tie Down's Universal Swivel Strap Connector excels in challenging conditions, ensuring reliable performance in diverse construction environments. Each package includes one high-quality strap and is available in quantities of 30 or 50 per box or 8 per bundle of connectors.
- USD
10 Gauge Zinc-Plated Swivel Strap Connector, Connector Only
59336
Designed for attachment of uplift straps at the factory OEM or in the field, Tie Down's Swivel "L" Tie Plate Assembly offers versatile solutions for enhanced structural integrity. The "L" Plate configuration optimizes uplift support by attaching securely to the floor and angling down alongside the rim joist, providing robust uplift reinforcement. Customize your assembly with the option to order a heavier finish coating, ensuring durability that matches your specific requirements. The "L" Tie Plate itself is crafted from 14-gauge pre-galvanized steel, ensuring enduring performance. The swivel strap connector, available separately, is built from 10-gauge zinc, offering steadfast support. Whether bolting the swivel to the tie strap or crimping the strap through the swivel connector, the installation process adapts to your preferences, guaranteeing a secure connection. Affix the assembly with confidence using either 0.131 x 1-1/2” nails or #8 x 1-1/2” screws, engaging at least 50% of the nine pre-punched holes in the strap, guaranteeing a secure and reliable hold. Tailor your solution with the choice of a comprehensive kit, a separate swivel strap connector, or the "L" Tie Plate only, ensuring flexibility to match your unique needs. The kit option includes essential components for a hassle-free installation, such as the connector, “L” Tie Plate, bolt, two washers, and a Nyloc nut, offering a comprehensive uplift support solution. Rest easy knowing that the Swivel "L" Tie Plate Assembly is backed by a 1-year warranty, underlining its quality and dependability.
- USD
3 in. x 16 in. Galvanized Tie Plate
59341
This tie plate, composed of 14 gauge, pre-galvanized, zinc-plated steel, ensures utmost durability and reliability with an impressive 2,400 lbs. capacity. Measuring 3 in. x 16 in., this stabilizer promises utmost stability in every manufactured home project.
- USD