close
Filter By
Brand
Country of Origin
Division
Warranty
Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.18 1
- 0.25 1
- 0.30 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.25 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.50 1
- 12.00 3
- 12.80 1
- 13.25 1
- 18.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.50 2
- 2.53 1
- 2.78 1
- 2.80 2
- 3.00 1
- 3.10 2
- 3.15 1
- 3.50 3
- 3.70 1
- 3.75 1
- 3.80 1
- 4.00 2
- 4.01 1
- 4.02 1
- 4.44 1
- 4.50 2
- 4.60 2
- 4.80 1
- 5.00 2
- 5.12 1
- 5.13 2
- 5.50 1
- 5.60 1
- 5.67 1
- 5.92 1
- 56.00 1
- 6.00 1
- 6.10 1
- 6.25 1
- 6.50 7
- 6.94 1
- 7.00 4
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.20 2
- 8.67 1
- 9.00 2
- 9.50 2
- 9.67 1
- 90.00 1
- 95.00 1
4.01, 10.50, 1.77, 8.00, 1.76, 1.85, 18.00, 4.44 - Manufactured Housing
9 items
8 Bolt Gator Clamp for Zone III and Florida
59011
Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
- USD
10 ft. Frame Tie with Buckle, 30 pack
59138
Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
- USD
Galvanized Steel Racking Alignment Brackets
59366
Tie Down's Racking Alignment Brackets offer an easy and efficient solution for aligning problem roofs. With their durable galvanized steel construction, these brackets ensure years of reliable service. Eliminate popped seams and lifting on corners with precise roof alignment, maintaining the integrity of your home or building. Designed for one-person operation, these brackets save time and money on installation. Whether it's residential or commercial roofing, achieve professional-grade results with ease using Tie Down's versatile and effective Alignment Brackets.
- USD
500 lb. Holding Power All Purpose Light Duty Anchor Kit
59070
Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
- USD
8 ft. Frame Tie with Buckle, 50 per box
59146
Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
- USD
Perimeter I beam Frame Kit
59617
Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
- USD
Beam Hook Top Pier Steel Head
MPH06
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
24 in. Steel Braced Support Piers, 6000 lb. Capacity
MPP24
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
Black Painted Quick-Set Stabilization Plate
59291
Tie Down’s innovative Quik-Set Stabilization Plate, with a black paint finish, is designed to be driven into the ground simultaneously with the anchor, slipping smoothly beneath the anchor head. Crafted for convenience, the Quik-Set Stabilization Plate offers a Quick-N-Easy installation. Its inclined steady rest is engineered to accommodate ground anchor installation at a slight back angle of 10-15 degrees, contributing to the swift and stable placement of both the anchor and the plate. The black painted finish provides a sleek appearance and reliable protection, ensuring ease of use and durability.
- USD
1 - 9 of 9
1