Filter Sort
close
1 - 9 of 9
IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS B Model MI2H3/4 with 3/4 in. rod, 48 in. long, 6 in. helix, Class 4A

IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS B Model MI2H3/4 with 3/4 in. rod, 48 in. long, 6 in. helix, Class 4A

59090

Available in both black paint and galvanized finishes (galvanized by special order), Tie Down's Iron Root Double Head Double Helix Manufactured Home Earth Anchors come with a 1-year warranty, assuring you of their quality and durability. The distinctive double-headed feature of these anchors enables the secure passage of two bolts, offering enhanced strength and attachment capabilities. Positioned with plates at the forefront of the anchor, these double heads connect seamlessly to the frame, serving the dual purpose of uplift protection and sidewall connections. Specifically designed for wind zones 2 and 3, these anchors extend their versatility across various wind conditions, ensuring steadfast stability. With either two 4-in. helixes or one 4-in. and one 6-in. helix, these anchors penetrate the soil with confidence, anchoring your manufactured home in place. Engineered for uplift and frame tie applications, these anchors provide a tailored solution for sidewall and I-beam connections. The innovative design encourages a range of strapping and attachment possibilities, including slotted bolts, contributing to the flexibility of installation. Designed for soil classes 2 and 4A, these anchors are meticulously crafted to thrive in their respective environments. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
600 ft. Galvanized G-120 Strap

600 ft. Galvanized G-120 Strap

59219

Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
View Details
500 lb. Holding Power All Purpose Light Duty Anchor Kit

500 lb. Holding Power All Purpose Light Duty Anchor Kit

59070

Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
View Details
Anchor Adapter Head

Anchor Adapter Head

59205

Tie Down's Anchor Adapter Head, available both with the Electric Drive Machine (EDM-20) and as a standalone replacement, simplifies anchor installations. Intended for all ground anchors, this component seamlessly attaches to the motor's shaft, ensuring a secure and straightforward setup process. Crafted from high-quality steel, the adapter head guarantees durability and reliability. Its purpose is to firmly hold the anchor head, allowing for secure placement before burying the anchor in the ground. For added convenience during installation, you can utilize a ½-inch pin or slotted bolt through the adapter head and anchor head, preventing any separation from the EDM. This feature, often referred to as the safety pin hole, enhances the overall ease and safety of the installation process.
View Details
16 in. x 18 in. ABS/PLASTIC FOUNDATION PADS, 2 sq. ft. for block piers and steel piers

16 in. x 18 in. ABS/PLASTIC FOUNDATION PADS, 2 sq. ft. for block piers and steel piers

59300

Designed to be placed under and support piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. Intended for use with either block or steel piers, the ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
View Details
16 in. x 16 in. ABS/PLASTIC FOUNDATION PADS for block and steel piers, 1.77 sq. ft.

16 in. x 16 in. ABS/PLASTIC FOUNDATION PADS for block and steel piers, 1.77 sq. ft.

59660

Designed to be placed under and support piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. Intended for use with either block or steel piers, the ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
View Details
Perimeter I beam Frame Kit

Perimeter I beam Frame Kit

59617

Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
View Details
Concrete Expansion Bolt Only

Concrete Expansion Bolt Only

2M58SA

This 3 in. x 5/8 in. Concrete Expansion Bolt works in conjunction with double and single head anchors to bolt their expansion sleeves into existing concrete. With one bolt per package, this high-quality expansion bolt plays a crucial role in securing these anchors to already poured concrete.
View Details
14 in. Steel Support Piers, 6000 lb. Capacity

14 in. Steel Support Piers, 6000 lb. Capacity

MPP14

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
View Details
1 - 9 of 9
1