close
Filter By
Brand
Division
Height (in.)
Warranty
Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.18 1
- 0.25 1
- 0.30 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.25 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.50 1
- 12.00 3
- 12.80 1
- 13.25 1
- 18.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.50 2
- 2.53 1
- 2.78 1
- 2.80 2
- 3.00 1
- 3.10 2
- 3.15 1
- 3.50 3
- 3.70 1
- 3.75 1
- 3.80 1
- 4.00 2
- 4.01 1
- 4.02 1
- 4.44 1
- 4.50 2
- 4.60 2
- 4.80 1
- 5.00 2
- 5.12 1
- 5.13 2
- 5.50 1
- 5.60 1
- 5.67 1
- 5.92 1
- 56.00 1
- 6.00 1
- 6.10 1
- 6.25 1
- 6.50 7
- 6.94 1
- 7.00 4
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.20 2
- 8.67 1
- 9.00 2
- 9.50 2
- 9.67 1
- 90.00 1
- 95.00 1
4.00, 5.50, 0.30, 1.42, 3.15, 2.78, 5.60, 18.00 - Manufactured Housing
11 items
8 Bolt Gator Clamp for Zone III and Florida
59011
Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
- USD
30 in. Longitudinal Struts for Xi2
59016
30" Longitudinal Concrete Strut Only
- USD
37 ft. G60 Galvanized Strap
59155
Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
- USD
12 in. Black Paint J ROD CONCRETE ANCHOR
59120
Tie Down's J Rod Concrete Anchor is a specialized solution for robust concrete anchoring needs. Crafted for installation during the concrete pouring process, this anchor features a unique J hook that conveniently attaches under rebar, ensuring exceptional stability and reliability. Choose between a sleek black paint or galvanized finish to suit your preferences and requirements. Available in versatile options, including 12 in. and 8 in. lengths, with the added choice of a swivel head variant, this anchor caters to a variety of construction demands. Boasting a substantial load capacity of up to 4725 lbs. per anchor, the J Rod Concrete Anchor assures steadfast support for a range of applications. Designed specifically for wet concrete installation, it's an indispensable component for ensuring the longevity and strength of your concrete structures. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
16 in. x 18 in. ABS/PLASTIC FOUNDATION PADS, 2 sq. ft. for block piers and steel piers
59300
Designed to be placed under and support piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. Intended for use with either block or steel piers, the ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
- USD
Swivel Tie Plate Assembly 3150 lb. Capacity
59340A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
Swivel Tie Plate Assembly 2000 lb. Capacity
59342A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
Concrete Expansion Bolt Only
2M58SA
This 3 in. x 5/8 in. Concrete Expansion Bolt works in conjunction with double and single head anchors to bolt their expansion sleeves into existing concrete. With one bolt per package, this high-quality expansion bolt plays a crucial role in securing these anchors to already poured concrete.
- USD
14 in. Steel Support Piers, 6000 lb. Capacity
MPP14
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD