close
Categories
Filter By
Brand
Division
Warranty
Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.18 1
- 0.25 1
- 0.30 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.25 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.50 1
- 12.00 3
- 12.80 1
- 13.25 1
- 18.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.50 2
- 2.53 1
- 2.78 1
- 2.80 2
- 3.00 1
- 3.10 2
- 3.15 1
- 3.50 3
- 3.70 1
- 3.75 1
- 3.80 1
- 4.00 2
- 4.01 1
- 4.02 1
- 4.44 1
- 4.50 2
- 4.60 2
- 4.80 1
- 5.00 2
- 5.12 1
- 5.13 2
- 5.50 1
- 5.60 1
- 5.67 1
- 5.92 1
- 56.00 1
- 6.00 1
- 6.10 1
- 6.25 1
- 6.50 7
- 6.94 1
- 7.00 4
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.20 2
- 8.67 1
- 9.00 2
- 9.50 2
- 9.67 1
- 90.00 1
- 95.00 1
4.00, 5.50, 0.30, 1.42, 12.00, 4.60 - Manufactured Housing
12 items
12 in. wide Galvanized Earth Anchor Stabilizer
59292G
Tie Down’s Earth Anchor Stabilizer, with a 12-inch width, effectively prevents the anchor from slicing through the soil laterally, ensuring a secure hold in the direction of the frame tie. This galvanized version offers superior corrosion resistance and long-lasting performance, making it ideal for harsh environmental conditions and ensuring exceptional durability.
- USD
Black Painted Cross Drive Rock Anchor Model #MRA With 48 in. Rods
59111
Tie Down's Cross Drive Rock Anchor is the ultimate solution for secure and precise anchoring into solid rock. Engineered with precision, this anchor is designed to be installed within 1 in. from the bottom of the anchor base, ensuring maximum stability. The swivel tensioning head allows for exact alignment during installation, providing a reliable and robust anchoring system. Perfect for Soil Class 1, this rock anchor is built to withstand demanding conditions and deliver exceptional performance. Its black-painted finish adds durability and protection against the elements, ensuring long-lasting reliability. Choose between the 30-inch or 48-inch rod length, depending on your anchoring requirements. Additionally, you have the option to purchase the head only or the 30-inch rod separately, offering versatility and convenience for your project. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
12 in. Black Paint J ROD CONCRETE ANCHOR
59120
Tie Down's J Rod Concrete Anchor is a specialized solution for robust concrete anchoring needs. Crafted for installation during the concrete pouring process, this anchor features a unique J hook that conveniently attaches under rebar, ensuring exceptional stability and reliability. Choose between a sleek black paint or galvanized finish to suit your preferences and requirements. Available in versatile options, including 12 in. and 8 in. lengths, with the added choice of a swivel head variant, this anchor caters to a variety of construction demands. Boasting a substantial load capacity of up to 4725 lbs. per anchor, the J Rod Concrete Anchor assures steadfast support for a range of applications. Designed specifically for wet concrete installation, it's an indispensable component for ensuring the longevity and strength of your concrete structures. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
2400 lb. Holding Power Storage Building Anchor Kit
59075
Tie Down’s versatile Storage Building Anchor Kit is specifically designed for medium-duty use, making it perfect for tasks that require up to 2,400 lbs. of ultimate holding power on each anchor. The kit includes four 30 in. painted anchors, each boasting an impressive 2,400 lb. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 60 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
- USD
Xi2 Asphalt Foundation, Block Set
59604
Tie Down's Xi2 foundation system provides windstorm and seismic protection for your home on ground, concrete, or asphalt. The lateral and longitudinal components easily combine to address both wind and seismic loads imposed on all four sides of your home. This would cover wind elements for wind zones I, II, & III. The Xi2 system can be used with single and double stack block configurations as well as steel pier options, with easy installation on I-beams, C-beams, and CR-beams.
- USD
Swivel Tie Plate Assembly 3150 lb. Capacity
59340A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
Swivel Tie Plate Assembly 2000 lb. Capacity
59342A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
Concrete Expansion Bolt Only
2M58SA
This 3 in. x 5/8 in. Concrete Expansion Bolt works in conjunction with double and single head anchors to bolt their expansion sleeves into existing concrete. With one bolt per package, this high-quality expansion bolt plays a crucial role in securing these anchors to already poured concrete.
- USD
14 in. Steel Support Piers, 6000 lb. Capacity
MPP14
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD