close
Filter By
Brand
Division
Height (in.)
Warranty
Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.18 1
- 0.25 1
- 0.30 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.25 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.50 1
- 12.00 3
- 12.80 1
- 13.25 1
- 18.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.50 2
- 2.53 1
- 2.78 1
- 2.80 2
- 3.00 1
- 3.10 2
- 3.15 1
- 3.50 3
- 3.70 1
- 3.75 1
- 3.80 1
- 4.00 2
- 4.01 1
- 4.02 1
- 4.44 1
- 4.50 2
- 4.60 2
- 4.80 1
- 5.00 2
- 5.12 1
- 5.13 2
- 5.50 1
- 5.60 1
- 5.67 1
- 5.92 1
- 56.00 1
- 6.00 1
- 6.10 1
- 6.25 1
- 6.50 7
- 6.94 1
- 7.00 4
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.20 2
- 8.67 1
- 9.00 2
- 9.50 2
- 9.67 1
- 90.00 1
- 95.00 1
Width (in.)
0.59, 4.00, 8.67, 18.00, 1.42, 0.60, 1.59, 1.76 - Manufactured Housing
11 items
8 Bolt Gator Clamp for Zone III and Florida
59011
Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
- USD
Black Paint Double Tension Head Model #MIDH
59100
Enhance the strength and reliability of your construction projects with Tie Down's Double Tension Head. This advanced tensioning system is a standard feature on all our tension head anchors, ensuring maximum performance and security for both frame and roof ties. The Double Tension Head is engineered to withstand tough conditions and provide exceptional tensioning capabilities. The strap bolts are designed with a square lock head, securely locking every fourth of a turn, guaranteeing a firm and steadfast connection. Choose from two durable finish options: a sleek black paint finish or a corrosion-resistant galvanized finish, both ensuring long-lasting protection and enhanced durability.
- USD
Painted Black SWIVEL HEAD ADAPTER Model #MIS2
59105
Tie Down’s Swivel Head Adapter converts any existing eye anchor into a tension head anchor. With its black paint finish enhancing its durability, this adapter opens new possibilities for secure installations. The kit includes two slotted bolts and nuts, ensuring you have all you need for a seamless upgrade to a tension head anchor configuration. With this adapter, you can conveniently adapt your existing anchors to meet the demands of tensioning tasks, offering increased versatility on the job.
- USD
12 in. Black Paint J ROD CONCRETE ANCHOR
59120
Tie Down's J Rod Concrete Anchor is a specialized solution for robust concrete anchoring needs. Crafted for installation during the concrete pouring process, this anchor features a unique J hook that conveniently attaches under rebar, ensuring exceptional stability and reliability. Choose between a sleek black paint or galvanized finish to suit your preferences and requirements. Available in versatile options, including 12 in. and 8 in. lengths, with the added choice of a swivel head variant, this anchor caters to a variety of construction demands. Boasting a substantial load capacity of up to 4725 lbs. per anchor, the J Rod Concrete Anchor assures steadfast support for a range of applications. Designed specifically for wet concrete installation, it's an indispensable component for ensuring the longevity and strength of your concrete structures. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
Marriage Wall Bracket, Bracket Only
59699
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
Swivel Tie Plate Assembly 3150 lb. Capacity
59340A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
Swivel Tie Plate Assembly 2000 lb. Capacity
59342A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
14 in. Steel Support Piers, 6000 lb. Capacity
MPP14
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS B Model MI2H3/4 with 3/4 in. rod, 48 in. long, 6 in. helix, Class 4A
59090
Available in both black paint and galvanized finishes (galvanized by special order), Tie Down's Iron Root Double Head Double Helix Manufactured Home Earth Anchors come with a 1-year warranty, assuring you of their quality and durability. The distinctive double-headed feature of these anchors enables the secure passage of two bolts, offering enhanced strength and attachment capabilities. Positioned with plates at the forefront of the anchor, these double heads connect seamlessly to the frame, serving the dual purpose of uplift protection and sidewall connections. Specifically designed for wind zones 2 and 3, these anchors extend their versatility across various wind conditions, ensuring steadfast stability. With either two 4-in. helixes or one 4-in. and one 6-in. helix, these anchors penetrate the soil with confidence, anchoring your manufactured home in place. Engineered for uplift and frame tie applications, these anchors provide a tailored solution for sidewall and I-beam connections. The innovative design encourages a range of strapping and attachment possibilities, including slotted bolts, contributing to the flexibility of installation. Designed for soil classes 2 and 4A, these anchors are meticulously crafted to thrive in their respective environments. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD