close
Filter By
Brand
# of users
Division
Warranty
Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.18 1
- 0.25 1
- 0.30 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.25 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.50 1
- 12.00 3
- 12.80 1
- 13.25 1
- 18.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.50 2
- 2.53 1
- 2.78 1
- 2.80 2
- 3.00 1
- 3.10 2
- 3.15 1
- 3.50 3
- 3.70 1
- 3.75 1
- 3.80 1
- 4.00 2
- 4.01 1
- 4.02 1
- 4.44 1
- 4.50 2
- 4.60 2
- 4.80 1
- 5.00 2
- 5.12 1
- 5.13 2
- 5.50 1
- 5.60 1
- 5.67 1
- 5.92 1
- 56.00 1
- 6.00 1
- 6.10 1
- 6.25 1
- 6.50 7
- 6.94 1
- 7.00 4
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.20 2
- 8.67 1
- 9.00 2
- 9.50 2
- 9.67 1
- 90.00 1
- 95.00 1
0.59, 4.00, 1.10, 3.15, 7.97, 1.71, 2.05, 18.00 - Manufactured Housing
9 items
8 Bolt Gator Clamp for Zone III and Florida
59011
Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
- USD
30 in. Longitudinal Struts for Xi2
59016
30" Longitudinal Concrete Strut Only
- USD
Black Paint Double Tension Head Model #MIDH
59100
Enhance the strength and reliability of your construction projects with Tie Down's Double Tension Head. This advanced tensioning system is a standard feature on all our tension head anchors, ensuring maximum performance and security for both frame and roof ties. The Double Tension Head is engineered to withstand tough conditions and provide exceptional tensioning capabilities. The strap bolts are designed with a square lock head, securely locking every fourth of a turn, guaranteeing a firm and steadfast connection. Choose from two durable finish options: a sleek black paint finish or a corrosion-resistant galvanized finish, both ensuring long-lasting protection and enhanced durability.
- USD
Anchor Adapter Head
59205
Tie Down's Anchor Adapter Head, available both with the Electric Drive Machine (EDM-20) and as a standalone replacement, simplifies anchor installations. Intended for all ground anchors, this component seamlessly attaches to the motor's shaft, ensuring a secure and straightforward setup process. Crafted from high-quality steel, the adapter head guarantees durability and reliability. Its purpose is to firmly hold the anchor head, allowing for secure placement before burying the anchor in the ground. For added convenience during installation, you can utilize a ½-inch pin or slotted bolt through the adapter head and anchor head, preventing any separation from the EDM. This feature, often referred to as the safety pin hole, enhances the overall ease and safety of the installation process.
- USD
8 in. Black Paint J ROD CONCRETE ANCHOR w/Swivel Head
59147
Tie Down's J Rod Concrete Anchor is a specialized solution for robust concrete anchoring needs. Crafted for installation during the concrete pouring process, this anchor features a unique J hook that conveniently attaches under rebar, ensuring exceptional stability and reliability. Choose between a sleek black paint or galvanized finish to suit your preferences and requirements. Available in versatile options, including 12 in. and 8 in. lengths, with the added choice of a swivel head variant, this anchor caters to a variety of construction demands. Boasting a substantial load capacity of up to 4725 lbs. per anchor, the J Rod Concrete Anchor assures steadfast support for a range of applications. Designed specifically for wet concrete installation, it's an indispensable component for ensuring the longevity and strength of your concrete structures. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
2 in. x 8 in. x 16 in. ABS PIER PLATES/CAP BOARDS
59662
Meant for bridging the vertical gap between the top of a pier and the bottom of the main beam, Tie Down's ABS Pier Cap Plates can be utilized individually or in a double-stacked configuration. With a remarkable load capacity of 8,000 lbs. for single use and an impressive 16,000 lbs. for double application, t1 in. plates are designed to complement 2 in. counterparts.
- USD
14 in. Steel Support Piers, 6000 lb. Capacity
MPP14
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS B Model MI2H3/4 with 3/4 in. rod, 48 in. long, 6 in. helix, Class 4A
59090
Available in both black paint and galvanized finishes (galvanized by special order), Tie Down's Iron Root Double Head Double Helix Manufactured Home Earth Anchors come with a 1-year warranty, assuring you of their quality and durability. The distinctive double-headed feature of these anchors enables the secure passage of two bolts, offering enhanced strength and attachment capabilities. Positioned with plates at the forefront of the anchor, these double heads connect seamlessly to the frame, serving the dual purpose of uplift protection and sidewall connections. Specifically designed for wind zones 2 and 3, these anchors extend their versatility across various wind conditions, ensuring steadfast stability. With either two 4-in. helixes or one 4-in. and one 6-in. helix, these anchors penetrate the soil with confidence, anchoring your manufactured home in place. Engineered for uplift and frame tie applications, these anchors provide a tailored solution for sidewall and I-beam connections. The innovative design encourages a range of strapping and attachment possibilities, including slotted bolts, contributing to the flexibility of installation. Designed for soil classes 2 and 4A, these anchors are meticulously crafted to thrive in their respective environments. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
26 in. Steel Braced Support Piers, 6000 lb. Capacity
MPP26
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
1 - 9 of 9
1