Manufactured Housing

8 Bolt Gator Clamp for Zone III and Florida

59011

Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.

$0.00

View Details

39 in. Longitudinal Struts for Concrete Xi2

59012

39" Longitudinal Concrete Strut Only

$0.00

View Details

30 in. Longitudinal Struts for Xi2

59016

30" Longitudinal Concrete Strut Only

$0.00

View Details

Black Painted 18.5 In. Barbed Asphalt Anchor

59367

Tie Down's Asphalt Anchor is a reliable and sturdy anchoring solution designed specifically for asphalt surfaces. With its durable black paint finish, the anchor is resistant to wear and tear. Ideal for horizontal applications at a maximum angle of 50 degrees, installation is made easy with a hammer drill, ensuring a secure and stable connection to the asphalt. With an impressive working load of 1,889 lbs., this anchor provides the strength and reliability needed to keep structures firmly anchored to the ground. Please note that this anchor is not suitable for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.

$0.00

View Details

500 lb. Holding Power All Purpose Light Duty Anchor Kit

59070

Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.

$0.00

View Details

Perimeter I beam Frame Kit

59617

Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame

$0.00

View Details

10 in. Steel Support Piers, 6000 lb. Capacity

MPP10

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.

$0.00

View Details

26 in. Steel Braced Support Piers, 6000 lb. Capacity

MPP26

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.

$0.00

View Details

14 ft. FRAME TIE WITH HOOK (MHT14)

59214

Tie Down's Frame Tie with Hook offers a quick and secure solution for installing frame ties with ease. Crafted from heavy-duty 1/4 inch steel, the robust hook ensures a strong and reliable connection to the frame, guaranteeing the safety and stability of your structure. This frame tie is constructed with certified galvanized steel strapping, adhering to the stringent NCS BCS A225.1 (ANSI A119.3) and HUD specifications. The galvanized coating provides excellent protection against corrosion, making it suitable for various environmental conditions. Choose from multiple options to suit your needs, available in boxes of 30 or 50 as well as 8 per bundle. The frame ties are offered in various lengths, ranging from 6 feet to 16 feet, allowing you to select the perfect fit for your project.

$0.00

View Details