Filter Sort
close
1 - 9 of 10
8 Bolt Gator Clamp for Zone III and Florida

8 Bolt Gator Clamp for Zone III and Florida

59011

Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
View Details
44 in. Longitudinal Struts for Concrete Xi2

44 in. Longitudinal Struts for Concrete Xi2

59013

44" Longitudinal Concrete Strut Only
View Details
500 lb. Holding Power All Purpose Light Duty Anchor Kit

500 lb. Holding Power All Purpose Light Duty Anchor Kit

59070

Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
View Details
IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS A Model MI2H5/8 with 5/8 in. rod, 48 in. long, 6 in. helix, Class 4A

IRON ROOT DOUBLE HEAD MANUFACTURED HOME EARTH ANCHORS A Model MI2H5/8 with 5/8 in. rod, 48 in. long, 6 in. helix, Class 4A

59081

Tie Down's Iron Root Double Head Manufactured Home Earth Anchors are expertly designed to deliver exceptional anchoring performance, specifically tailored for uplift and frame tie applications. Featuring a double-headed configuration, these anchors ensure robust attachment for both sidewall and I-beam connections. This innovative design opens doors to a variety of strapping and attachment options, including slotted bolts. The double-headed nature of these anchors facilitates the use of two bolts, enhancing their structural integrity. The plates are positioned in front of the Iron Root anchors, making them ideal for frame attachment in wind zones 2 and 3, providing reliable security against lateral forces. This design offers remarkable versatility across different wind zones, offering the necessary adaptability to varying conditions. With a 6 in. or 7 in. helix, these anchors are engineered to provide optimal grip and stability in the soil. They are specifically engineered for use within soil classes 4A and 4B, ensuring a dependable anchoring solution for various ground conditions. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
17 in. x 25 in. ABS/PLASTIC FOUNDATION PADS, 3 sq. ft.

17 in. x 25 in. ABS/PLASTIC FOUNDATION PADS, 3 sq. ft.

59302

Designed to be placed under and support steel piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. The ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
View Details
Perimeter I beam Frame Kit

Perimeter I beam Frame Kit

59617

Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
View Details
Xi2 Asphalt Outrigger I Beam Hardware

Xi2 Asphalt Outrigger I Beam Hardware

59619

Xi2 Asphalt System Hardware Kit for Standard Outrigger I beam Frame
View Details
18 in. Steel Support Piers, 6000 lb. Capacity

18 in. Steel Support Piers, 6000 lb. Capacity

MPP18

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
View Details
20 in. Steel Support Piers, 6000 lb. Capacity

20 in. Steel Support Piers, 6000 lb. Capacity

MPP20

A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
View Details
1 - 9 of 10