close
Filter By
Brand
Country of Origin
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Warranty
Width (in.)
8.00, 3.80, 1.83, 0.60, 0.25, 8.80, 7.44, 12.00 - Manufactured Housing
10 items
Black Painted Cross Drive Rock Anchor Model #MRA With 48 in. Rods
59111
Tie Down's Cross Drive Rock Anchor is the ultimate solution for secure and precise anchoring into solid rock. Engineered with precision, this anchor is designed to be installed within 1 in. from the bottom of the anchor base, ensuring maximum stability. The swivel tensioning head allows for exact alignment during installation, providing a reliable and robust anchoring system. Perfect for Soil Class 1, this rock anchor is built to withstand demanding conditions and deliver exceptional performance. Its black-painted finish adds durability and protection against the elements, ensuring long-lasting reliability. Choose between the 30-inch or 48-inch rod length, depending on your anchoring requirements. Additionally, you have the option to purchase the head only or the 30-inch rod separately, offering versatility and convenience for your project. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
Black Painted 18.5 In. Barbed Asphalt Anchor
59367
Tie Down's Asphalt Anchor is a reliable and sturdy anchoring solution designed specifically for asphalt surfaces. With its durable black paint finish, the anchor is resistant to wear and tear. Ideal for horizontal applications at a maximum angle of 50 degrees, installation is made easy with a hammer drill, ensuring a secure and stable connection to the asphalt. With an impressive working load of 1,889 lbs., this anchor provides the strength and reliability needed to keep structures firmly anchored to the ground. Please note that this anchor is not suitable for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
500 lb. Holding Power All Purpose Light Duty Anchor Kit
59070
Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
- USD
17 in. x 25 in. ABS/PLASTIC FOUNDATION PADS, 3 sq. ft.
59302
Designed to be placed under and support steel piers that hold up your mobile home, Tie Down's ABS Foundation Pads offer an innovative and efficient solution for your foundation needs. These pads are lighter than traditional concrete, leading to labor and cost savings during installation. With larger pad sizes, they increase spacing, saving valuable time and materials. Environmentally conscious, these foundation pads are made from recycled materials, contributing to sustainability efforts. Their stackable design allows for easy expansion, creating larger pad areas and wider pier spacing, ideal for various applications. The ABS Foundation Pads come in both single and multi-pad configurations, catering to different soil capacities. They are approved for use by HUD 3285.312(3) and are listed and labeled by RADCO #1345, ensuring compliance with industry standards.
- USD
12 ft. Frame Tie with Buckle, 30 pack
59144
Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
- USD
Xi2 Asphalt Foundation, Block Set
59604
Tie Down's Xi2 foundation system provides windstorm and seismic protection for your home on ground, concrete, or asphalt. The lateral and longitudinal components easily combine to address both wind and seismic loads imposed on all four sides of your home. This would cover wind elements for wind zones I, II, & III. The Xi2 system can be used with single and double stack block configurations as well as steel pier options, with easy installation on I-beams, C-beams, and CR-beams.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
Marriage Wall Bracket, Bracket Only
59699
Designed to facilitate precise and secure installation of vertical ties, Tie Down’s Marriage Wall Bracket is a crucial element for shear wall applications, marriage ridge beam supports, and rim plates in strict accordance with factory guidelines. Crafted to provide unwavering support, it's the ideal solution for reinforcing marriage walls or ridge beam connections, aligning perfectly with specified factory-marked column openings. This versatile bracket can be tailored to your needs, available with an optional heavier finish coating for enhanced durability. Crafted from sturdy 9-gauge painted black steel, it's engineered to withstand the demands of construction environments. Backed by a 1-year warranty, you can trust in the quality and durability of this component. Installation is streamlined and efficient, allowing for bolted attachment with a swivel to the bracket's end or through the slot, or a seamless fit through a swivel connector. To ensure steadfast stability, secure the bracket using two 3/8” x 3” fully threaded lag bolts from the bottom into the perimeter rail. Designed for robust performance, this Marriage Wall Bracket boasts an impressive 2,400 lb. design load capacity, reinforcing your structures and bolstering their resilience against various challenges. It's available in two configurations: the bracket alone or the bracket bundled with a 5 ft. strap, offering flexibility to suit your specific project requirements.
- USD
Perimeter I beam Frame Kit
59617
Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
- USD