Manufactured Housing

30 in. Coral Anchor

59096

The Coral Anchor is your solution for anchoring in coral formations. The Coral Anchor is built to be driven with ease – the 30 in. rod effortlessly penetrates the coral with the assistance of an impact hammer. The anchor's barbs ensure steadfast embedment, providing unparalleled stability and reliability. Designed for use at a 60-degree angle (30 degrees from vertical) into the coral. Not for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.

$0.00

View Details

8 Bolt Gator Clamp for Zone III and Florida

59011

Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.

$0.00

View Details

35 ft. Galvanized G-60 Strap

59150

Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.

$0.00

View Details

Black Painted CROSS DRIVE ROCK ANCHOR Model #MRA with 30 in. Rod

59110

Tie Down's Cross Drive Rock Anchor is the ultimate solution for secure and precise anchoring into solid rock. Engineered with precision, this anchor is designed to be installed within 1 in. from the bottom of the anchor base, ensuring maximum stability. The swivel tensioning head allows for exact alignment during installation, providing a reliable and robust anchoring system. Perfect for Soil Class 1, this rock anchor is built to withstand demanding conditions and deliver exceptional performance. Its black-painted finish adds durability and protection against the elements, ensuring long-lasting reliability. Choose between the 30-inch or 48-inch rod length, depending on your anchoring requirements. Additionally, you have the option to purchase the head only or the 30-inch rod separately, offering versatility and convenience for your project. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.

$0.00

View Details

10 ft. Frame Tie with Buckle, 30 pack

59138

Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.

$0.00

View Details

500 lb. Holding Power All Purpose Light Duty Anchor Kit

59070

Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.

$0.00

View Details

4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES

59663

Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.

$0.00

View Details

Perimeter I beam Frame Kit

59617

Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame

$0.00

View Details

Xi2 Asphalt Perimeter C Beam Hardware

59618

Xi2 Asphalt System Hardware Kit for Perimeter C or CR Beam

$0.00

View Details