close
Filter By
Brand
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Height (in.)
Warranty
Width (in.)
7.44, 0.25, 0.10, 56.00, 1.58, 8.20 - Manufactured Housing
8 items
DEEP SET - CAP ANCHOR/STABILIZERS J 36 in. long with 3/4 in. rod and 4 in. & 6 in. helix with 7 in. Class 4A
59092
Available in a sleek black paint finish or the specialized galvanized option (via special order), Tie Down's Deep Set Anchors combine stabilization and anchoring in one design, resisting lateral movement through the soil. With a one-year warranty, Deep Set Cap Anchors eliminate the need for a separate stabilizer plate, streamlining the installation process and saving you valuable time. The utilization of a soil torque probe to classify the soil is required for installation. The I and J versions boast premium 7-inch lengths with specialized teeth for enhanced soil penetration, ensuring superior strength and performance. The K and L variants offer 6-inch options, providing an economical yet reliable choice for your stabilization needs. From premium to economy, Tie Down's Deep Set - Cap Anchors/Stabilizers offer a dependable range of solutions tailored to your specific requirements. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
SLOTTED BOLT & NUT Model #BISB
59135
Achieve unparalleled tensioning accuracy with Tie Down's Slotted Bolt and Nut, essential components for ensuring the proper tensioning of frame or sidewall straps when paired with Tension Head Anchors. Engineered exclusively for use with all Tension Head Anchors, the Slotted Bolt and Nut are meticulously designed to seamlessly integrate with these anchor systems. As indispensable components, they play a vital role in achieving optimal tensioning, guaranteeing the utmost compatibility and efficiency for your anchoring needs. The innovative slotted design of the bolt empowers you with effortless adjustment capabilities, allowing for precise fine-tuning of the tension in the straps. Whether it's tensioning frame straps or sidewall straps, the Slotted Bolt and Nut offer unparalleled versatility, adapting seamlessly to various Tension Head Anchors across diverse applications.
- USD
8 ft. Galvanized Frame Tie with Hook
59195
Tie Down's Frame Tie with Hook offers a quick and secure solution for installing frame ties with ease. Crafted from heavy-duty 1/4 inch steel, the robust hook ensures a strong and reliable connection to the frame, guaranteeing the safety and stability of your structure. This frame tie is constructed with certified galvanized steel strapping, adhering to the stringent NCS BCS A225.1 (ANSI A119.3) and HUD specifications. The galvanized coating provides excellent protection against corrosion, making it suitable for various environmental conditions. Choose from multiple options to suit your needs, available in boxes of 30 or 50 as well as 8 per bundle. The frame ties are offered in various lengths, ranging from 6 feet to 16 feet, allowing you to select the perfect fit for your project.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
Electric Drive Machine
59620
Tie Down's robust Electric Drive Machine is equipped with a 1/2 HP motor, operating at a speed of 20 RPM, making anchor installation hassle-free. It operates quietly while maintaining its high performance, ensuring a pleasant experience during anchor installation. Safety is paramount, and Tie Down's Electric Drive Machine prioritizes it with a standard Ground Fault Interrupter (GFI) cord. This essential safety feature protects against electrical hazards, providing a secure and reliable operation. The Electric Drive Machine features a versatile adapter head that fits all double-head anchors. Its inside socket accommodates the Soil Test Probe, expanding its functionality even further.
- USD
8 ft. Frame Tie With Hook, 8 Per Bundle
59195B
Tie Down's Frame Tie with Hook offers a quick and secure solution for installing frame ties with ease. Crafted from heavy-duty 1/4 inch steel, the robust hook ensures a strong and reliable connection to the frame, guaranteeing the safety and stability of your structure. This frame tie is constructed with certified galvanized steel strapping, adhering to the stringent NCS BCS A225.1 (ANSI A119.3) and HUD specifications. The galvanized coating provides excellent protection against corrosion, making it suitable for various environmental conditions. Choose from multiple options to suit your needs, available in boxes of 30 or 50 as well as 8 per bundle. The frame ties are offered in various lengths, ranging from 6 feet to 16 feet, allowing you to select the perfect fit for your project.
- USD
24 in. Steel Braced Support Piers, 6000 lb. Capacity
MPP24
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
2500 lb. Capacity Sidewall Swivel Strap Assembly
59338A
Tie Down's Sidewall Swivel Strap Assembly offers exceptional uplift support with its sturdy components. Crafted from robust 14-gauge steel, these sidewall uplift straps provide reliable attachment to wall studs, offering security both at the factory and in the field. The strap connector, made from durable 10-gauge zinc, ensures a solid connection. Available in two configurations, the G-60 tie straps come in either 14 or 12-gauge pre-galvanized steel. These versatile straps can be installed either to the floor rim joist or outer wall studs, catering to different anchoring needs. The assembly process is adaptable – either bolt the swivel to the end of the tie strap or slide the strap through the swivel connector and crimp it to fit securely. This assembly is available in various options, including a complete kit, swivel strap connector only, and tie straps only. Depending on your specific needs, you can choose between assemblies with a capacity of either 1,717 lbs. or 2,500 lbs. Each assembly includes a connector, strap, bolt, two washers, and a nyloc nut, providing you with all the necessary components for a secure and effective uplift support solution.
- USD
1 - 8 of 8
1