close
Filter By
Brand
# of users
Country of Origin
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Warranty
3.85, 2.05, 1.10, 1.24, 4.50, 4.60, 8.00 - Manufactured Housing
9 items
44 in. Longitudinal Struts for Concrete Xi2
59013
44" Longitudinal Concrete Strut Only
- USD
500 lb. Holding Power All Purpose Light Duty Anchor Kit
59070
Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
- USD
Anchor Adapter Head
59205
Tie Down's Anchor Adapter Head, available both with the Electric Drive Machine (EDM-20) and as a standalone replacement, simplifies anchor installations. Intended for all ground anchors, this component seamlessly attaches to the motor's shaft, ensuring a secure and straightforward setup process. Crafted from high-quality steel, the adapter head guarantees durability and reliability. Its purpose is to firmly hold the anchor head, allowing for secure placement before burying the anchor in the ground. For added convenience during installation, you can utilize a ½-inch pin or slotted bolt through the adapter head and anchor head, preventing any separation from the EDM. This feature, often referred to as the safety pin hole, enhances the overall ease and safety of the installation process.
- USD
2 in. x 8 in. x 16 in. ABS PIER PLATES/CAP BOARDS
59662
Meant for bridging the vertical gap between the top of a pier and the bottom of the main beam, Tie Down's ABS Pier Cap Plates can be utilized individually or in a double-stacked configuration. With a remarkable load capacity of 8,000 lbs. for single use and an impressive 16,000 lbs. for double application, t1 in. plates are designed to complement 2 in. counterparts.
- USD
Perimeter I beam Frame Kit
59617
Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
- USD
Xi2 Asphalt Outrigger I Beam Hardware
59619
Xi2 Asphalt System Hardware Kit for Standard Outrigger I beam Frame
- USD
Flat Top Pier Steel Head
MPH04
A reliable and efficient alternative to traditional dry-stacked blocks, our Steel Support Piers are designed and engineered to handle vertical loads with ease, providing a support rating of up to 6,000 lbs. These Support Piers are versatile in application, suitable for a wide range of factory-built structures including manufactured homes, mobile commercial units, classrooms, multiplexes, sheds, and similar structures. With the ability to withstand various wind zone conditions, except for “Exposure D” or areas within 1,500 ft. of the coastline, our Steel Support Piers are designed to provide exceptional stability and support. Available up to a maximum of 30 in. and in braced support as well, these Support Piers are compatible with a variety of heads to prevent movement after attachment to the beam or marriage line.
- USD
12 in. wide Black Painted Earth Anchor Stabilizer
59292
Tie Down’s Earth Anchor Stabilizer, with a 12-inch width, effectively prevents the anchor from slicing through the soil laterally, ensuring a secure hold in the direction of the frame tie. This version features a durable black paint finish, providing a sleek appearance and enhanced protection against the elements, making it suitable for various environmental conditions.
- USD
Black Painted Quick-Set Stabilization Plate
59291
Tie Down’s innovative Quik-Set Stabilization Plate, with a black paint finish, is designed to be driven into the ground simultaneously with the anchor, slipping smoothly beneath the anchor head. Crafted for convenience, the Quik-Set Stabilization Plate offers a Quick-N-Easy installation. Its inclined steady rest is engineered to accommodate ground anchor installation at a slight back angle of 10-15 degrees, contributing to the swift and stable placement of both the anchor and the plate. The black painted finish provides a sleek appearance and reliable protection, ensuring ease of use and durability.
- USD
1 - 9 of 9
1