Filter Sort
close
1 - 8 of 8
30 in. Coral Anchor

30 in. Coral Anchor

59096

The Coral Anchor is your solution for anchoring in coral formations. The Coral Anchor is built to be driven with ease – the 30 in. rod effortlessly penetrates the coral with the assistance of an impact hammer. The anchor's barbs ensure steadfast embedment, providing unparalleled stability and reliability. Designed for use at a 60-degree angle (30 degrees from vertical) into the coral. Not for vertical anchorage. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
8 Bolt Gator Clamp for Zone III and Florida

8 Bolt Gator Clamp for Zone III and Florida

59011

Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
View Details
10 ft. Frame Tie with Buckle, 30 pack

10 ft. Frame Tie with Buckle, 30 pack

59138

Tie Down's Frame Tie with Buckle includes a galvanized strap pre-attached with a durable buckle, ensuring a secure and hassle-free connection to the frame. The process is straightforward: effortlessly push the strap's end between the inside of the frame "I" beam and the floor. Position the buckle at the upper end of the "I" beam frame, then wrap the strap around the beam and thread its end through the slot in the buckle. A simple pull secures the strap, keeping the buckle in place for added stability. Choose the perfect length for your project with options ranging from 7 to 16 ft. Available in convenient quantities, you can opt for boxes containing 30 or 50 kits or bundles of 8 kits each. With Tie Down's Frame Tie with Buckle, you're equipped with a smart solution that streamlines installation, saving you time and effort while ensuring a dependable connection to the frame.
View Details
500 lb. Holding Power All Purpose Light Duty Anchor Kit

500 lb. Holding Power All Purpose Light Duty Anchor Kit

59070

Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
View Details
Perimeter I beam Frame Kit

Perimeter I beam Frame Kit

59617

Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
View Details
Xi2 Asphalt Perimeter C Beam Hardware

Xi2 Asphalt Perimeter C Beam Hardware

59618

Xi2 Asphalt System Hardware Kit for Perimeter C or CR Beam
View Details
17.5 in. x 13.5 in. Galvanized XL Stabilizer Plate

17.5 in. x 13.5 in. Galvanized XL Stabilizer Plate

59286

Tie Down’s XL Stabilizer Plate is an essential component for anchoring installations in Class 4 soils, as mandated by Florida regulations. With precise dimensions of 17.5 in. x 13.5 in., this plate offers ample surface area to enhance stability and distribute the load evenly. Crafted with a galvanized finish, the XL Stabilizer Plate provides exceptional resistance to corrosion and weathering, ensuring long-lasting performance in challenging environmental conditions.
View Details
30 in. long, 1/2 in. rod, 4 in. helix Galvanized EYE ANCHORS

30 in. long, 1/2 in. rod, 4 in. helix Galvanized EYE ANCHORS

59057

Tie Down's Eye Anchors offer a versatile and dependable solution for securing a wide range of items, making them an essential addition to various outdoor projects. Whether it's anchoring trees, pool covers, tents, canopies, boats, airplanes, fencing, playground equipment, carports, awnings, outdoor decorations, or antennas, these anchors prove their reliability. They have been effectively utilized to secure dog enclosures, swing sets, and sheds, providing stability without the need for storm-prone areas. Available in both black paint and galvanized finishes, these anchors boast durability and visual appeal. With a 1-year warranty, they provide assurance of quality and performance. Installation is hassle-free - simply screw the anchor into the ground. The strength of the anchor's hold varies based on soil conditions, making them adaptable to various environments. Rope, cable, or ratchet straps can be used to ensure a secure attachment. Tie Down offers standard sizes for convenience, but also welcomes custom orders for anchors tailored to specific needs. The anchors come with the choice of either a 1/2-inch or 5/8-inch rod and a 4-inch or 6-inch helix, allowing for versatility in applications. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
View Details
1 - 8 of 8
1