close
Categories
Filter By
Brand
Color
Country of Origin
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 1
- 0.59 1
- 0.60 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 1
- 1.58 3
- 1.59 1
- 1.60 1
- 1.62 2
- 1.67 2
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 18.00 1
- 19.00 1
- 2.00 2
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 1
- 2.80 2
- 22.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 2
- 3.75 1
- 3.80 1
- 3.85 1
- 3.98 1
- 37.00 1
- 4.00 1
- 4.02 1
- 4.50 2
- 4.60 1
- 4.73 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.44 1
- 7.50 2
- 7.67 1
- 7.97 1
- 8.00 2
- 8.17 1
- 8.20 1
- 8.67 1
- 8.80 1
- 9.00 2
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
Warranty
12.80, 8.00, 0.25, 3.48, 1.42, 18.00, 5.30, 95.00 - Manufactured Housing
11 items
8 Bolt Gator Clamp for Zone III and Florida
59011
Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
- USD
600 ft. Galvanized G-120 Strap
59219
Tie Down's Galvanized Steel Strap is engineered to meet the stringent requirements set by HUD Codes 3280 and 3285(2). Crafted from high-quality galvanized steel, this strap is designed to provide superior strength and durability for your mobile home anchoring needs. Conforming to ASTM D3953-97 standards for strapping, flat steel, and seals, this Type 1, Grade 1, Finish B steel strap boasts a minimum total capacity of 4,725 lbs. and a working capacity of 3,150 lbs. Its exceptional load-bearing capabilities ensure reliable and secure anchoring for your valuable property. For added convenience during installation and monitoring, the strap is conveniently marked every 5 ft., allowing you to easily measure and position it accurately. Tie Down's Galvanized Steel Strap is built to withstand the elements, offering reliable protection against weather deterioration and corrosion. The galvanized coating provides equivalent weather resistance to zinc-coated steel, ensuring the longevity and integrity of the strap even in challenging outdoor conditions.
- USD
12 in. Black Paint J ROD CONCRETE ANCHOR
59120
Tie Down's J Rod Concrete Anchor is a specialized solution for robust concrete anchoring needs. Crafted for installation during the concrete pouring process, this anchor features a unique J hook that conveniently attaches under rebar, ensuring exceptional stability and reliability. Choose between a sleek black paint or galvanized finish to suit your preferences and requirements. Available in versatile options, including 12 in. and 8 in. lengths, with the added choice of a swivel head variant, this anchor caters to a variety of construction demands. Boasting a substantial load capacity of up to 4725 lbs. per anchor, the J Rod Concrete Anchor assures steadfast support for a range of applications. Designed specifically for wet concrete installation, it's an indispensable component for ensuring the longevity and strength of your concrete structures. These anchors are tested to meet the stringent requirements of HUD 3280 and 3285, and listed and labeled by RADCO #1349, ensuring compliance with industry standards and regulations.
- USD
500 lb. Holding Power All Purpose Light Duty Anchor Kit
59070
Tie Down’s versatile All Purpose Light Duty Anchor Kit is specifically designed for light-duty use, making it perfect for tasks that require up to 500 lbs. of ultimate holding power on each anchor. The kit includes four 15 in. painted anchors, each boasting an impressive 500 lbs. ultimate holding power. These anchors are strategically placed on corners, providing stability and security. The inclusion of eight 1/8 in. galvanized clamps further reinforces the setup, ensuring a robust and dependable connection. To further enhance its utility, the kit offers 50 ft. of 1/8 in. galvanized aircraft cable. This versatile cable can be cut to the desired length, allowing you to connect anchors together or use them individually. The cable’s galvanized construction ensures durability and resistance to corrosion, ensuring its reliability over time.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
STEEL PIER SET for XI2 ASPHALT SYSTEMS
59616
Xi2 Asphalt Foundation System for Manufactured Adjustable Steel Piers
- USD
Perimeter I beam Frame Kit
59617
Xi2 Asphalt System Hardware Kit for Perimeter I beam Frame
- USD
Swivel Tie Plate Assembly 3150 lb. Capacity
59340A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD
Swivel Tie Plate Assembly 2000 lb. Capacity
59342A
Tie Down's Swivel Tie Plate Assembly offers a versatile and secure solution for fastening tie straps in various applications. Designed with ease of use in mind, this assembly allows for flexible installation methods, ensuring a reliable connection between the tie strap and the structure. The Swivel Tie Plate Assembly provides two installation options for the tie strap. You can either bolt the strap with the swivel to the end or slide the strap through the swivel connector and crimp it to fit securely. The Tie Plate attaches to the floor at the wall plate and angles down the side of the rim joist, creating a strong and reliable connection. Fasten it with either 0.131 x 1-½ in. nails or 8 x 1-½ in. screws, ensuring at least 50% of the pre-punched holes in the strap are filled. Each assembly includes all the necessary components for easy installation, including the swivel connector, tie plate, bolt, two washers, and a nyloc nut. The Swivel Tie Plate Assembly is engineered for strength, offering either a 2,000 lb. or 3,150 lb. capacity. Also, you can choose from the 10 gauge zinc swivel strap connector only or the 6 in. x 8 in. tie plate only, available in either 12 gauge zinc or 14 gauge galvanized steel. Select the assembly that best suits your specific needs.
- USD